Skip to content

ASIC3 support for tmio_mmc

Philipp Zabel lkml 1 version Applied

Status from this message: Applied to my for-next branch, many thanks.

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest7 patches 9 repliesApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/7MFD,mmc: tmio_mmc: make HCLK configurabledrivers/mfd/t7l66xb.c drivers/mfd/tc6387xb.c drivers/mfd/tc6393xb.c +2 more+33 -131 reply
2/7mmc: tmio_mmc: add bus_shift supportdrivers/mmc/host/tmio_mmc.c drivers/mmc/host/tmio_mmc.h+125 -810 replies
3/7mmc: tmio_mmc: don't use set_irq_type (v2)drivers/mmc/host/tmio_mmc.c+2 -40 replies
4/7mmc: tmio_mmc: correct probe return value for num_resources != 3drivers/mmc/host/tmio_mmc.c+5 -70 replies
5/7mmc: tmio_mmc: map SD control registers after enabling the MFD celldrivers/mmc/host/tmio_mmc.c+10 -101 reply
6/7mmc: tmio_mmc: fix SDCLK divider settingdrivers/mmc/host/tmio_mmc.c+3 -31 reply
7/7mmc: tmio_mmc: allow compilation for ASIC3drivers/mmc/host/Kconfig drivers/mmc/host/tmio_mmc.c+3 -32 replies

Reviews trailers per patch

5 of 7 patches have a Reviewed-by or Acked-by.

PatchIan Molton
1/7A-b
2/7A-b
3/7A-b
4/7A-b
5/7A-b
6/7
7/7

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/7] ASIC3 support for tmio_mmc

I've broken the long lines in patches 1-3 and merged the fix into patch 2:
[PATCH 1/7] MFD,mmc: tmio_mmc: make HCLK configurable (v2)
[PATCH 2/7] mmc: tmio_mmc: add bus_shift support (v2)
[PATCH 3/7] mmc: tmio_mmc: don't use set_irq_type (v2)
[PATCH 4/7] mmc: tmio_mmc: correct probe return value for num_resources != 3
Also I've added three new patches for your consideration. Patch 5 delays mapping of the SD control registers because mfd_cell->enable has to enable the RAM first. Patch 6 fixes a bug in the SDCLK divider calculation and patch 7 finally enables compilation of tmio_mmc for ASIC3:
[PATCH 5/7] mmc: tmio_mmc: map SD control registers after enabling the MFD cell [PATCH 6/7] mmc: tmio_mmc: fix SDCLK divider setting
[PATCH 7/7] mmc: tmio_mmc: allow compilation for ASIC3

regards
Philipp