Add support for TI OMAP4 SDP and Panda
Get series with b4
b4 am 1276895448.31352.81.camel@petertVersions newest first
- v3 Latest0 of 10 patches 0 repliesNew
Patches in v3 No applies recorded yet
None of the 10 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.
Cover letter [U-Boot] [PATCH v3 00/10] Add support for TI OMAP4 SDP and Panda
Hi Steve,
Quoted 5 lines
Steve Sakoman (10):
ARM: Renamearch/arm/cpu/arm_cortexa8to armv7
ARMV7: Add basic support for TI OMAP4
ARMV7: Add support for TI OMAP4430 SDP
ARMV7: Add support for TI OMAP4 Panda
Quoted 8 lines
ARMV7: Restructure OMAP mmc driver to allow code sharing between
OMAP3 and OMAP4
ARMV7: Enable mmc support on TI OMAP4430 SDP
ARMV7: Enable mmc support on TI OMAP4 Panda
ARMV7: Restructure OMAP i2c driver to allow code sharing between
OMAP3 and OMAP4
ARMV7: Enable i2c support on TI OMAP4 SDP
ARMV7: Enable i2c support on TI OMAP4 Panda
It'd be preferred if you could reorganize the patch series to first make all CPU/SOC changes, then finally do 1 patch for each board. This is generally considered cleaner than having patches bouncing back and forth between common and board specific code. Right now the SDP and Panda boards each require 3 patches when 1 patch apiece should suffice. eg:
ARM: Rename arch/arm/cpu/arm_cortexa8 to armv7
ARMV7: Add basic support for TI OMAP4
ARMV7: Restructure OMAP mmc driver to allow code sharing between OMAP3 and OMAP4
ARMV7: Restructure OMAP i2c driver to allow code sharing between OMAP3 and OMAP4
ARMV7: Add support for TI OMAP4430 SDP
ARMV7: Add support for TI OMAP4 Panda
Best,
Peter