Skip to content

OMAP4: Smartreflex and Voltage layer support

Thara Gopinath linux-arm-kernel linux-omap 5 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v5 Latest5 patches 0 repliesNew
  2. v45 patches 0 repliesSuperseded
  3. v36 patches 6 repliesSuperseded
Earlier versions · 2
VersionPostedPatchesRepliesStatus
v211 patches9 repliesSuperseded
v110 patches6 repliesSuperseded

Patches in v5 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5OMAP4: Register voltage PMIC parameters with the voltage layerarch/arm/mach-omap2/omap_twl.c arch/arm/mach-omap2/pm.c arch/arm/mach-omap2/pm.h+172 -00 replies
2/5OMAP4: Adding voltage driver supportarch/arm/mach-omap2/Makefile arch/arm/mach-omap2/control.h arch/arm/mach-omap2/voltage.c +1 more+304 -11 reply
3/5OMAP4: PM: Program correct init voltages for scalable VDDsarch/arm/mach-omap2/pm.c+11 -00 replies
4/5OMAP4: hwmod: Add inital data for smartreflex modules.arch/arm/mach-omap2/omap_hwmod_44xx_data.c+168 -08 replies
5/5OMAP4: Smartreflex framework extensionsarch/arm/mach-omap2/smartreflex.c arch/arm/mach-omap2/sr_device.c arch/arm/plat-omap/Kconfig+23 -40 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v5 yet.

Read the v5 thread

Cover letter [PATCH v5 0/5] OMAP4: Smartreflex and Voltage layer support

This patch series adds support for OMAP4 support in the smartreflex and voltage layer. The series involves extensions to voltage layer and smartreflex layer for supporting OMAP4.

This series in based against kernel.org 2.6.37-rc3 and is dependent on the "OMAP3: Adding Smartreflex and Voltage driver support" series.

All these patches are also available at
http://dev.omapzoom.org/?p=thara/omap-dvfs.git;a=summary
head: kevin-pm-sr

This patch series has been tested on OMAP4430 SDP with omap2plus_defconfig with the following menuconfig options enabled

        System type -> TI OMAP Implementations -> Smartreflex Support
        System type -> TI OMAP Implementations ->
                Class 3 mode of Smartreflex Implementation

Benoit Cousson (1):
OMAP4: hwmod: Add inital data for smartreflex modules.

Thara Gopinath (4):
OMAP4: Register voltage PMIC parameters with the voltage layer
OMAP4: Adding voltage driver support
OMAP4: PM: Program correct init voltages for scalable VDDs
OMAP4: Smartreflex framework extensions

 arch/arm/mach-omap2/Makefile               |    2 +-
 arch/arm/mach-omap2/control.h              |   12 ++
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |  168 +++++++++++++++++
 arch/arm/mach-omap2/omap_twl.c             |  166 +++++++++++++++++
 arch/arm/mach-omap2/pm.c                   |   12 ++
 arch/arm/mach-omap2/pm.h                   |    5 +
 arch/arm/mach-omap2/smartreflex.c          |    8 +-
 arch/arm/mach-omap2/sr_device.c            |   17 ++-
 arch/arm/mach-omap2/voltage.c              |  279 ++++++++++++++++++++++++++++
 arch/arm/plat-omap/Kconfig                 |    2 +-
 arch/arm/plat-omap/include/plat/voltage.h  |   12 ++
 11 files changed, 678 insertions(+), 5 deletions(-)