Skip to content

Enable CPSW on TI814x EVM

Matt Porter u-boot 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest4 patches 0 repliesNew
  2. v14 patches 0 repliesSuperseded

Changes in v2 from the cover letter

- Improved sata pll config comment and defined magic clock values
- Added the kernel tag that the et1011c.c driver is derived from

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4am33xx: add pll and clock support for TI814x CPSWarch/arm/cpu/armv7/am33xx/clock_ti814x.c arch/arm/include/asm/arch-am33xx/hardware_ti814x.h board/ti/ti814x/evm.c+105 -21 reply
2/4cpsw: add support for TI814x slave_regs differencesdrivers/net/cpsw.c+6 -00 replies
3/4phy: add support for ET1011C physdrivers/net/phy/Makefile drivers/net/phy/et1011c.c drivers/net/phy/phy.c +1 more+115 -00 replies
4/4ti814x_evm: enable CPSW supportboard/ti/ti814x/evm.c board/ti/ti814x/evm.h board/ti/ti814x/mux.c +1 more+129 -00 replies

Reviews trailers per patch

All 4 patches have a Reviewed-by or Acked-by.

PatchTom Rini
1/4R-b
2/4R-b
3/4R-b
4/4R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [U-Boot] [PATCH v2 0/4] Enable CPSW on TI814x EVM

This series adds support for CPSW on the PG1.0 TI814x EVM board. The V1 CPSW on TI814x requires minor register changes to the existing driver as well as TI814x-specific pll/clock support. An ET1011C phy driver is added to support the PHY present on the PG1.0 EVM.

It has been tested loading/booting a Linux kernel and regression tested on BeagleBone and EVM-SK AM33XX boards. It has also been MAKEALL tested for all am33xx platforms.

The series applies on top of the following patches:

	- am33xx: Add required includes to some omap/am33xx code
	  http://patchwork.ozlabs.org/patch/227804/
	- Add TI814x EVM Support v4
	  http://www.mail-archive.com/u-boot at lists.denx.de/msg108356.html

Changes since v1:
- Improved sata pll config comment and defined magic clock values
- Added the kernel tag that the et1011c.c driver is derived from

Matt Porter (4):
am33xx: add pll and clock support for TI814x CPSW
cpsw: add support for TI814x slave_regs differences
phy: add support for ET1011C phys
ti814x_evm: enable CPSW support

 arch/arm/cpu/armv7/am33xx/clock_ti814x.c           |  103 +++++++++++++++++-
 arch/arm/include/asm/arch-am33xx/hardware_ti814x.h |    1 +
 board/ti/ti814x/evm.c                              |   75 +++++++++++++
 board/ti/ti814x/evm.h                              |    1 +
 board/ti/ti814x/mux.c                              |   35 +++++++
 drivers/net/cpsw.c                                 |    6 ++
 drivers/net/phy/Makefile                           |    1 +
 drivers/net/phy/et1011c.c                          |  110 ++++++++++++++++++++
 drivers/net/phy/phy.c                              |    3 +
 include/configs/ti814x_evm.h                       |   21 ++++
 include/phy.h                                      |    1 +
 11 files changed, 355 insertions(+), 2 deletions(-)
 create mode 100644 drivers/net/phy/et1011c.c
Signature · 1 line
1.7.9.5