Skip to content

Add CAN FD infrastructure for CAN driver

Oliver Hartkopp linux-can 8 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v9 Latest7 patches 2 repliesIn review
  2. v87 patches 3 repliesSuperseded
  3. v77 patches 4 repliesSuperseded
Earlier versions · 5
VersionPostedPatchesRepliesStatus
v67 patches0 repliesSuperseded
v56 patches12 repliesSuperseded
v47 patches3 repliesSuperseded
v35 patches7 repliesSuperseded
v15 patches0 repliesSuperseded

Patches in v9 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/7can: preserve skbuff protocol in can_put_echo_skbdrivers/net/can/dev.c+3 -20 replies
2/7can: only send bitrate data via netlink when availabledrivers/net/can/dev.c+6 -40 replies
3/7can: move sanity check for bitrate and tq into can_get_bittimingdrivers/net/can/dev.c+11 -60 replies
4/7can: provide a separate bittiming_const parameter to bittiming functionsdrivers/net/can/dev.c+25 -340 replies
5/7can: introduce the data bitrate configuration for CAN FDdrivers/net/can/dev.c include/linux/can/dev.h include/uapi/linux/can/netlink.h+50 -30 replies
6/7can: allow to change the device mtu for CAN FD capable devicesdrivers/net/can/dev.c include/linux/can/dev.h include/uapi/linux/can/netlink.h+42 -00 replies
7/7can: add bittiming check at interface open for CAN FDdrivers/net/can/dev.c+8 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v9 yet.

Read the v9 thread

Cover letter [PATCH v9 0/7] Add CAN FD infrastructure for CAN driver

This is the patch series to extend the CAN driver infrastructure with CAN FD.

Changes v8 -> v9:

Fixed a whitepace issue in patch 4 and added a comment about the different configuration options.

*** BLURB HERE ***

Oliver Hartkopp (7):
can: preserve skbuff protocol in can_put_echo_skb
can: only send bitrate data via netlink when available
can: move sanity check for bitrate and tq into can_get_bittiming
can: provide a separate bittiming_const parameter to bittiming
functions
can: introduce the data bitrate configuration for CAN FD
can: allow to change the device mtu for CAN FD capable devices
can: add bittiming check at interface open for CAN FD

 drivers/net/can/dev.c            | 160 ++++++++++++++++++++++++++++++---------
 include/linux/can/dev.h          |   7 +-
 include/uapi/linux/can/netlink.h |   3 +
 3 files changed, 133 insertions(+), 37 deletions(-)
Signature · 1 line
1.9.0