Skip to content

RFC ARM: shmobile: Add CPUFreq support for r8a7790-lager platform

Benoit Cousson linux-sh 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 RFC Latest4 patches 5 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4ARM: dts: r8a7790-lager: Add VDD MPU regulator for DVFSarch/arm/boot/dts/r8a7790-lager.dts+21 -01 reply
2/4ARM: dts: r8a7790-lager: Add DVFS parameters into cpu0 node for r8a7790arch/arm/boot/dts/r8a7790-lager.dts arch/arm/boot/dts/r8a7790.dtsi+15 -00 replies
3/4ARM: shmobile: lager-reference: Add cpufreq-cpu0 device for CPUFreq supportarch/arm/mach-shmobile/board-lager-reference.c+3 -00 replies
4/4ARM: shmobile: Make r8a77900 CPUFreq capablearch/arm/mach-shmobile/Kconfig+2 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [RFC 0/4] ARM: shmobile: Add CPUFreq support for r8a7790-lager platform

Hi Magnus,

This not-yet-ready-to-merge series is adding CPUFreq support to Lager board.

Due to the missing data for the OPP voltage values, a safe 1.0v value is used for all OPPs.

At least this series can be used by Laurent to test the z-clock CCF node and the KICK bit fix I've just sent.

Bottom-line, no real DVFS so far, but just DFS :-)

Please note that this series is safe even in the case of Cortex A7 boot since the cpufreq-cpu0 driver is using the physical CPU@0 device node. In the case of CA7 boot, the first cpu will be the CPU@100, and thus the driver will fail at probe time due to the lack of CPU@0.

Regards,
Benoit

Benoit Cousson (4):
ARM: dts: r8a7790-lager: Add VDD MPU regulator for DVFS
ARM: dts: r8a7790-lager: Add DVFS parameters into cpu0 node for

    r8a7790

ARM: shmobile: lager-reference: Add cpufreq-cpu0 device for CPUFreq
support
ARM: shmobile: Make r8a77900 CPUFreq capable

 arch/arm/boot/dts/r8a7790-lager.dts            | 25 +++++++++++++++++++++++++
 arch/arm/boot/dts/r8a7790.dtsi                 | 11 +++++++++++
 arch/arm/mach-shmobile/Kconfig                 |  2 ++
 arch/arm/mach-shmobile/board-lager-reference.c |  3 +++
 4 files changed, 41 insertions(+)
Signature · 1 line
1.8.3.2