Marvell PXA1928 USB support
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v3 Latest6 patches 5 repliesIn review
- v26 patches 6 repliesSuperseded
- v15 patches 18 repliesSuperseded
Changes in v3 from the cover letter
- Clarify FSL only binding properties.
- Add owner field to phy_ops.
- Restructure split between PHY init/power_on and power_off/exit.
- Fix PHY error path handling.
- drop unrelated change in ci_hdrc_usb2.c.
- Add Peter's tested-by.
Patches in v3 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/6 | dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindingsDocumentation/ | +18 | 0 replies | |
| 2/6 | phy: Add Marvell USB 2.0 OTG 28nm PHYdrivers/ drivers/ drivers/ | +366 | 0 replies | |
| 3/6 | phy: add Marvell HSIC 28nm PHYdrivers/ drivers/ drivers/ | +231 | 0 replies | |
| 4/6 | dt-bindings: Consolidate ChipIdea USB ci13xxx bindingsDocumentation/ Documentation/ Documentation/ +1 more | +21 | 2 replies | |
| 5/6 | usb: chipidea: allow multiple instances to use default ci_default_pdatadrivers/ | +5 | 1 reply | |
| 6/6 | usb: chipidea: add work-around for Marvell HSIC PHY startupdrivers/ | +12 | 1 reply |
Reviews trailers per patch
2 of 6 patches have a Reviewed-by or Acked-by.
| Patch | Peter Chen | Ivan T. Ivanov |
|---|---|---|
| 1/6 | ||
| 2/6 | ||
| 3/6 | ||
| 4/6 | A-b | A-b |
| 5/6 | A-b | |
| 6/6 | T-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v3 0/6] Marvell PXA1928 USB support
This series adds USB PHYs and EHCI host drivers for the Marvell PXA1928 SOC.
The OTG block is based on ChipIdea and works with the "chipidea,usb2" compatible driver as is just by adding the PHY driver. Yay! After more testing it turns out the EHCI host is also based on ChipIdea too. So this version uses the ChipIdea driver for both. A couple of fixes are needed to make the ChipIdea driver work with the PXA1928 EHCI host.
Rob
v3:
- Clarify FSL only binding properties.
- Add owner field to phy_ops.
- Restructure split between PHY init/power_on and power_off/exit.
- Fix PHY error path handling.
- drop unrelated change in ci_hdrc_usb2.c.
- Add Peter's tested-by.
v2:
- Use ChipIdea driver for EHCI host, dropping the Marvell specific EHCI driver
- Consolidate ChipIdea bindings to single common doc.
- rename phy driver files to phy-pxa-28nm-{usb2,hsic}.c
- Simplified work-around for HSIC phy/controller handshake.
Rob Herring (6):
dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings
phy: Add Marvell USB 2.0 OTG 28nm PHY
phy: add Marvell HSIC 28nm PHY
dt-bindings: Consolidate ChipIdea USB ci13xxx bindings
usb: chipidea: allow multiple instances to use default
ci_default_pdata
usb: chipidea: add work-around for Marvell HSIC PHY startup
.../devicetree/bindings/phy/pxa1928-usb-phy.txt | 18 ++ .../devicetree/bindings/usb/ci-hdrc-imx.txt | 35 -- .../devicetree/bindings/usb/ci-hdrc-qcom.txt | 17 - .../devicetree/bindings/usb/ci-hdrc-usb2.txt | 22 +- .../devicetree/bindings/usb/ci-hdrc-zevio.txt | 17 - drivers/phy/Kconfig | 20 ++ drivers/phy/Makefile | 2 + drivers/phy/phy-pxa-28nm-hsic.c | 220 +++++++++++++ drivers/phy/phy-pxa-28nm-usb2.c | 355 +++++++++++++++++++++ drivers/usb/chipidea/ci_hdrc_usb2.c | 8 +- drivers/usb/chipidea/host.c | 12 + 11 files changed, 653 insertions(+), 73 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/pxa1928-usb-phy.txt delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt delete mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt create mode 100644 drivers/phy/phy-pxa-28nm-hsic.c create mode 100644 drivers/phy/phy-pxa-28nm-usb2.c
Signature · 6 lines
2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html