Skip to content

Add GPIO, EthernetAVB and MMC support for iWave G20D-Q7 board

Ben Hutchings cip-dev 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest0 of 15 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 15 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [cip-dev] [PATCH 00/15] Add GPIO, EthernetAVB and MMC support for iWave G20D-Q7 board
Quoted 10 lines · Chris Paterson

This patch series adds support for a number of interfaces to the iWave iwg20d-q7 (CIP reference) board which is based on the Renesas r8a7743 SoC.

Support is added for GPIO, EthernetAVB and MMC. In addition there is a patch to add low-level debug support.

This series completes the basic platform support for the Renesas CIP reference platform allowing users to get the platform up and running.

This patch series applies cleanly to and is tested on linux-4.4.y-cip 1e2ef7cc8.

This all looks good. I've applied these patches locally and will push out soon.

I booted it on my board and confirm that Ethernet and eMMC are now working. However, I had to enable EXT4_FS because shmobile_defconfig doesn't. That seems like an (upstream) bug.

Ben.

Quoted 40 lines

Biju Das (7):
ARM: dts: iwg20d-q7: Add pinctl support for scif0
gpio: rcar: Add R8A7743 (RZ/G1M) support
ARM: dts: r8a7743: Add GPIO support
dt-bindings: net: ravb : Add support for r8a7743 SoC
ARM: shmobile: defconfig: Enable Ethernet AVB
ARM: dts: r8a7743: Add Ethernet AVB support
ARM: dts: iwg20d-q7: Add Ethernet AVB support

Chris Paterson (4):
dt-bindings: mmc: sh_mmcif: Document r8a7743 DT bindings
ARM: dts: r8a7743: Add MMCIF0 support
ARM: dts: iwg20m: Add MMCIF0 support
ARM: debug-ll: Add support for r8a7743

Geert Uytterhoeven (2):
pinctrl: sh-pfc: r8a7791: Add missing mmc_data8_b pin group
ARM: dts: iwg20m: Correct indentation of mmcif0 properties

Sergei Shtylyov (1):
ARM: dts: r8a7743: add PFC support

Simon Horman (1):
ravb: add fallback compatibility strings

 .../devicetree/bindings/gpio/renesas,gpio-rcar.txt |   1 +
 .../devicetree/bindings/mmc/renesas,mmcif.txt      |   1 +
 .../devicetree/bindings/net/renesas,ravb.txt       |  20 ++-
 arch/arm/Kconfig.debug                             |   8 +-
 arch/arm/boot/dts/r8a7743-iwg20d-q7.dts            |  31 +++++
 arch/arm/boot/dts/r8a7743-iwg20m.dtsi              |  26 ++++
 arch/arm/boot/dts/r8a7743.dtsi                     | 146 ++++++++++++++++++++-
 arch/arm/configs/shmobile_defconfig                |   1 +
 drivers/gpio/gpio-rcar.c                           |   4 +
 drivers/net/ethernet/renesas/ravb_main.c           |   2 +
 drivers/pinctrl/sh-pfc/pfc-r8a7791.c               |  15 ++-
 11 files changed, 245 insertions(+), 10 deletions(-)
Signature · 2 lines
Ben Hutchings
Software Developer, Codethink Ltd.

Read the cover letter in its thread