Skip to content

Add UART support to r8a7743

Ben Hutchings cip-dev 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest4 of 15 patches 0 repliesNew

4 of 15 patches are in this archive. The cover letter announces 15.

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
9/15serial: sh-sci: Add pin initialization for SCIFA/SCIFB+0 -01 reply
9/15serial: sh-sci: Add pin initialization for SCIFA/SCIFB+0 -00 replies
12/15ARM: dts: iwg20d-q7: Rework DT architecture+0 -01 reply
12/15ARM: dts: iwg20d-q7: Rework DT architecture+0 -01 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [cip-dev] [PATCH 00/15] Add UART support to r8a7743

I've applied this series, thanks.

Ben.

Quoted 48 lines · Fabrizio Castro

This series aims at adding UART support to r8a7743 by backporting the relevant patches from upstream.
As per upstream, since two of the serial interfaces live on the camera daughter board, we rework the DT architecture to better accomodate all the possible HW variants.

Finally, in order to get CTS/RTS to work this series backports fixes made by Geert some time ago.

Thanks,
Fabrizio

Biju Das (1):
? ARM: dts: iwg20d-q7: Add chosen node

Fabrizio Castro (3):
? ARM: dts: iwg20d-q7: Rework DT architecture
? ARM: dts: iwg20d-q7-dbcm-ca: Add device trees for camera DB ? ARM: dts: iwg20d-q7: Add support for ttySC3

Geert Uytterhoeven (11):
? serial: sh-sci: Update DT binding documentation for GPIO modem lines ? serial: sh-sci: Update DT binding documentation for dedicated RTS/CTS ? serial: sh-sci: Always set TIOCM_CTS in .get_mctrl() callback ? serial: sh-sci: Add support for GPIO-controlled modem lines ? serial: sh-sci: Do not open-code sci_getreg()
? serial: sh-sci: Add more Serial Port Register documentation ? serial: sh-sci: Add more Serial Port Control/Data Register ????documentation
? serial: sh-sci: Correct pin initialization on (H)SCIF
? serial: sh-sci: Add pin initialization for SCIFA/SCIFB
? serial: sh-sci: Fix support for hardware-assisted RTS/CTS ? serial: sh-sci: Add DT support for dedicated RTS/CTS

?.../bindings/serial/renesas,sci-serial.txt?????????|???4 +
?arch/arm/boot/dts/Makefile?????????????????????????|???1 +
?arch/arm/boot/dts/iwg20d-q7-common.dtsi????????????| 127 +++++++++++++++
?arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi???????????|??43 +++++
?arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts????|??19 +++
?arch/arm/boot/dts/r8a7743-iwg20d-q7.dts????????????| 100 +-----------
?drivers/tty/serial/Kconfig?????????????????????????|???1 +
?drivers/tty/serial/sh-sci.c????????????????????????| 177 ++++++++++++++++++---
?drivers/tty/serial/sh-sci.h????????????????????????|??24 ++-

?9 files changed, 365 insertions(+), 131 deletions(-) ?create mode 100644 arch/arm/boot/dts/iwg20d-q7-common.dtsi ?create mode 100644 arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi ?create mode 100644 arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dts

Signature · 2 lines
Ben Hutchings
Software Developer, Codethink Ltd.