RFC Convert Pico-Pi i.MX7D to DM
Get series with b4
b4 am [email protected]Versions newest first
- v1 RFC Latest0 of 9 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 9 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [RFC 0/9] Convert Pico-Pi i.MX7D to DM
Hi all,
Pinctrl, GPIO, I2C, MMC, ETH are converted.
Convert PMIC is the same of warp7 but i have a some erros, si this log :
U-Boot SPL 2019.01-00197-ga524e5d-dirty (Jan 20 2019 - 21:09:49 +0100) Trying to boot from USB SDP
SDP: initialize...
SDP: handle requests...
Downloading file of size 556397 to 0x877fffc0... done Jumping to header at 0x877fffc0
Header Tag is not an IMX image
U-Boot 2019.01-00197-ga524e5d-dirty (Jan 20 2019 - 21:09:49 +0100)
CPU: Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz) CPU: Commercial temperature grade (0C to 95C) at 43C Reset cause: POR Model: TechNexion PICO-IMX7D Board and PI baseboard Board: i.MX7D PICOSOM DRAM: 512 MiB read error from device: 9df65458 register: 0x3! PMIC: PFUZE3000 DEV_ID=0x0 REV_ID=0xfffffffb read error from device: 9df65458 register: 0x69! write error to device: 9df65458 register: 0x23! write error to device: 9df65458 register: 0x31! write error to device: 9df65458 register: 0x21! write error to device: 9df65458 register: 0x2f! read error from device: 9df65458 register: 0x2e! write error to device: 9df65458 register: 0x2e! MMC: FSL_SDHC: 2, FSL_SDHC: 1, FSL_SDHC: 0 Loading Environment from MMC... OK In: serial at 30a70000 Out: serial at 30a70000 Err: serial at 30a70000
Net:
Warning: ethernet at 30be0000 using MAC address from ROM
eth0: ethernet at 30be0000
Hit any key to stop autoboot: 0
USB is convert but update u-boot with dfu log a error :
=> dfu 0 mmc 0
Request would exceed designated area!
#Deferred dfu_flush() failed!=>
Thanks a advance for your help.
Best Regards,
Joris Offouga
Joris Offouga (9):
Arm: dts: imx7d-pico: Import Linux pico-pi dts
Arm: imx7d-pico: Add DT file hooks
pico-pi-imx7d: defconfig Enable DM gpio pinctrl and pinctrl_imx7
arm: imx7d-pico-pi: Convert to DM MMC initialization
pico-pi-imx7d: defconfig: Switch to DM for I2C
pico-imx7d-pico: defconfig: Switch to DM for UART
pico-imx7d: Convert to DM PMIC
arm: pico-pi-imx7d: Convert to DM USB
pico-imx7d: Convert to DM Ethernet
arch/arm/dts/Makefile | 3 +- arch/arm/dts/imx7d-pico-pi.dts | 102 ++++++ arch/arm/dts/imx7d-pico.dtsi | 588 +++++++++++++++++++++++++++++++ board/technexion/pico-imx7d/pico-imx7d.c | 105 +----- configs/pico-pi-imx7d_defconfig | 17 +- include/configs/pico-imx7d.h | 11 - 6 files changed, 726 insertions(+), 100 deletions(-) create mode 100644 arch/arm/dts/imx7d-pico-pi.dts create mode 100644 arch/arm/dts/imx7d-pico.dtsi
Signature · 1 line
2.7.4