Skip to content

MIPS: Ingenic: Initial X1000 support.

Zhou Yanjie linux-devicetree linux-mips lkml 6 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v6 Latest10 of 12 patches 0 repliesNew
  2. v510 patches 0 repliesSuperseded
  3. v46 patches 6 repliesSuperseded
Earlier versions · 3
VersionPostedPatchesRepliesStatus
v34 patches0 repliesSuperseded
v24 patches2 repliesSuperseded
v14 patches2 repliesSuperseded

10 of 12 patches are in this archive. Their subjects are numbered up to 12.

Patches in v6 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/12MIPS: Ingenic: Initial X1000 support.arch/mips/boot/dts/ingenic/x1000.dtsi arch/mips/jz4740/Kconfig+182 -00 replies
2/12dt-bindings: Document yna vendor-prefix.Documentation/devicetree/bindings/vendor-prefixes.yaml+2 -00 replies
3/12dt-bindings: MIPS: Add Ingenic XBurst based boards.Documentation/devicetree/bindings/mips/ingenic/devices.yaml+35 -00 replies
4/12MIPS: Ingenic: Initial YSH & ATIL CU Neo board support.arch/mips/boot/dts/ingenic/Makefile arch/mips/boot/dts/ingenic/cu1000-neo.dts arch/mips/configs/cu1000-neo_defconfig +1 more+155 -00 replies
5/12MIPS: X1000: Add pdma controller DT node.arch/mips/boot/dts/ingenic/x1000.dtsi+13 -00 replies
6/12MIPS: CU1000: Update defconfig for pdma controller.arch/mips/configs/cu1000-neo_defconfig+2 -00 replies
7/12MIPS: X1000: Add msc controller DT node.arch/mips/boot/dts/ingenic/cu1000-neo.dts arch/mips/boot/dts/ingenic/x1000.dtsi+58 -00 replies
8/12MIPS: CU1000: Update defconfig for msc controller.arch/mips/configs/cu1000-neo_defconfig+2 -00 replies
9/12MIPS: X1000: Add rtc DT node.arch/mips/boot/dts/ingenic/x1000.dtsi+11 -00 replies
10/12MIPS: CU1000: Update defconfig for rtc.arch/mips/configs/cu1000-neo_defconfig+2 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v6 yet.

Read the v6 thread