Skip to content

Few patches needed to support QE USB on MPC8360E-{MDS,RDK} boards

Anton Vorontsov linuxppc-dev 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest4 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4powerpc/QE: implement QE Pin Multiplexing APIarch/powerpc/include/asm/qe.h arch/powerpc/sysdev/qe_lib/gpio.c+204 -00 replies
2/4powerpc: add driver for simple GPIO banksDocumentation/powerpc/dts-bindings/fsl/board.txt arch/powerpc/platforms/Kconfig arch/powerpc/sysdev/Makefile +2 more+210 -00 replies
3/4powerpc/83xx: add USB Host/Gadget support for the MPC8360E-MDS boardsarch/powerpc/boot/dts/mpc836x_mds.dts arch/powerpc/platforms/83xx/mpc836x_mds.c+92 -30 replies
4/4powerpc/83xx: add USB Host support for the MPC8360E-RDK boardsarch/powerpc/boot/dts/mpc836x_rdk.dts+17 -20 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/4] Few patches needed to support QE USB on MPC8360E-{MDS,RDK} boards

Hi Kumar,

I'm resending the QE USB patches, the old ones started to cause rejects.

Could you apply them for 2.6.28? Especially the first patch, since it is holding the FHCI driver. I still hope that Greg would apply the driver post -rc1. ;-)

Thanks!

Signature · 3 lines
Anton Vorontsov
email: [email protected]
irc://irc.freenode.net/bd2

Read the cover letter in its thread