Skip to content

Add support for SolidRun's IMX6 board

Russell King - ARM Linux linux-arm-kernel linux-devicetree 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest1 of 2 patches 0 repliesNew

1 of 2 patches is in this archive. The cover letter announces 2.

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
2/2ARM: imx: update imx_v6_v7_defconfig+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] Add support for SolidRun's IMX6 board

So, this patch series adds support for SolidRun's new platform which is similar in size to a well known board named after a type of fruit. These two patches add the basic support for the platform, without HDMI.

Having discussed the timing of this with Rabeeh, I have his blessing to post this now.

The platform is made up from two boards:
- A microsom board, which is re-used in the Cubox-I. This board comes in a couple of different configurations:
- AR8035 gigabit ethernet phy fitted
- AR8030 fast ethernet phy fitted
In order to support these two configurations, I have split the Ethernet support from the rest of the microsom. When the AR8030 versions are available and known, I'll add the imx6qdl-microsom-ar8030.dtsi file.
- The base board.

Not many changes are required to the code - the only requirement is the need to add AR8035 ethernet phy configuration support to the IMX6Q code.

 arch/arm/boot/dts/Makefile                     |    1 +
 arch/arm/boot/dts/imx6dl-hummingboard.dts      |   90 ++++++++++++++++++++++++
 arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi |   58 +++++++++++++++
 arch/arm/boot/dts/imx6qdl-microsom.dtsi        |   80 +++++++++++++++++++++
 arch/arm/configs/imx_v6_v7_defconfig           |    4 +
 arch/arm/mach-imx/mach-imx6q.c                 |   35 +++++++++
 6 files changed, 268 insertions(+), 0 deletions(-)