Add board detection for Odroid XU3 / XU3Lite / XU4
Get series with b4
b4 am 20151021045813.04d38ef5@i7Versions newest first
- v1 Latest0 of 7 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 7 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [U-Boot] [PATCH 0/7] Add board detection for Odroid XU3 / XU3Lite / XU4
Quoted 29 lines · On Mon, 31 Aug 2015 00:33:16 +0530 Anand Moon <[email protected]> wrote:
At the last moment I got this to work on my odroidxu3 board.
One problem I would like to address out is usb smsc95xx ethernet is not getting started at the boot.
# usb start /* command failed at the start */ ------------------------------------------------------------------------------------------------------ U-Boot 2015.10-rc2-00226-g7dbe336 (Aug 30 2015 - 23:41:27 +0530) for ODROID-XU3CPU: Exynos5422 @ 800 MHz Model: Odroid XU3 based on EXYNOS5422 Board: Odroid XU3 based on EXYNOS5422 Model: xu3 DRAM: 2 GiB MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1*** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
starting USB...USB0: USB EHCI 1.00 USB1: Register 2000140 NbrPorts 2
Quoted 13 lines
Starting the controller
USB XHCI 1.00
USB2: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found scanning bus 1 for devices... 1 USB Device(s) found scanning bus 2 for devices... 1 USB Device(s) found
scanning usb for ethernet devices... 0 Ethernet Device(s) found
No ethernet found.
missing environment variable: pxeuuid
missing environment variable: bootfile
-----------------------------------------------------------------------------------------
Hi Anand,
This looks like it might be the same problem as
http://lists.denx.de/pipermail/u-boot/2015-October/230827.html
Simon Glass asked if this also happens on XU3, so maybe you could test the same workaround on your board and provide feedback?
Signature · 2 lines
Best regards, Siarhei Siamashka