Skip to content

mx7dsabresd: Set VLD04 output to 2.8V in PMIC initialization.

Gautam Bhat u-boot 3 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest1 patch 0 repliesNew
  2. v21 patch 0 repliesSuperseded
  3. v11 patch 0 repliesSuperseded

Changes in v3 from the cover letter

- Used pmic_clrsetbits for consistency.

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/1mx7dsabresd: Set VLD04 output to 2.8V in PMIC initialization.board/freescale/mx7dsabresd/mx7dsabresd.c+6 -02 replies

Reviews trailers per patch

The patch has a Reviewed-by or Acked-by.

PatchFabio Estevam
1/1A-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v3 thread

Cover letter [U-Boot] [PATCH v3 0/1] mx7dsabresd: Set VLD04 output to 2.8V in PMIC initialization.

This change sets the VLDO4 settings output to 2.8V in PMIC initialization. I accidentally noticed this when I was testing the DSI voltage input which was 3.3V. Not setting the proper voltage can harm some of the voltage sensitive peripheral.

Changes in v3:
- Used pmic_clrsetbits for consistency.

Gautam Bhat (1):
Set VLD04 output to 2.8V in PMIC initialization.

 board/freescale/mx7dsabresd/mx7dsabresd.c | 6 ++++++
 1 file changed, 6 insertions(+)
Signature · 1 line
2.11.0