Add USB2.0 Host support
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest0 of 5 patches 0 repliesNew
Patches in v1 No applies recorded yet
None of the 5 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH 0/5] Add USB2.0 Host support
Quoted 5 lines · Biju Das
Hello,
This series aims to add USB2.0 Host support on iWave RZ/G1M(r8a7743) based board.
Quoted 7 lines
This series has been tested against renesas-dev tag 20170830-v4.13-rc7
This patch has documentation dependency on below patches
* PCI: rcar: Add r8a7743/5 support
https://patchwork.kernel.org/patch/9919697/
* phy: rcar-gen2: Add r8a7743/5 support
https://patchwork.kernel.org/patch/9919727/
Thanks for the testing and dependency information.
I see that the PCI dependency has been accepted by Bjorn Helgaas. And the phy dependency is both trivial and has been acked by Rob Herring so it seems very likely to be accepted.
On the strength of the above I have accepted this series for v4.15.
Quoted 15 lines
Biju Das (5):
ARM: dts: r8a7743: Add internal PCI bridge nodes
ARM: dts: r8a7743: Add USB PHY DT support
ARM: dts: r8a7743: Link PCI USB devices to USB PHY
ARM: dts: iwg20d-q7: Enable internal PCI
ARM: dts: iwg20d-q7: Enable USB PHYarch/arm/boot/dts/r8a7743-iwg20d-q7.dts | 26 ++++++++++ arch/arm/boot/dts/r8a7743.dtsi | 92 +++++++++++++++++++++++++++++++++ 2 files changed, 118 insertions(+)Signature · 1 line
1.9.1