ARM: dts: introduce Compulab IoT Gateway
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest6 patches 6 repliesIn review
Changes in v1 from the cover letter
* Squashed the dts build into the initial patch
* Dropped the phy refclk patch from this series, submitting to PCI list
* Removed fsl,spi-num-chipselects property
* Removed LCD and DVI nodes, will follow up with a later series
* s/fsl,uart-has-rtscts/uart-has-rtscts/g
* Fixed regulator usage inside of simple-bus
Patches in v1 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/6 | ARM: dts: imx7d-sbc-iot: add initial iot gateway dtsarch/ arch/ | +157 | 1 reply | |
| 2/6 | ARM: dts: imx7d-cl-som: add nodes for usbh, and usbotg2arch/ | +27 | 1 reply | |
| 3/6 | ARM: dts: imx7s: add dma supportarch/ | +6 | 1 reply | |
| 4/6 | ARM: dts: imx7s: add node and supplies for vdd1p2arch/ | +16 | 1 reply | |
| 5/6 | ARM: dts: imx7d-sbc-iot: enable PCIe peripheralarch/ | +13 | 1 reply | |
| 6/6 | ARM: dts: imx7s: add usb hsic phy domainarch/ | +6 | 1 reply |
Reviews trailers per patch
3 of 6 patches have a Reviewed-by or Acked-by.
| Patch | Fabio Estevam |
|---|---|
| 1/6 | |
| 2/6 | |
| 3/6 | R-b |
| 4/6 | |
| 5/6 | R-b |
| 6/6 | R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v1 0/6] ARM: dts: introduce Compulab IoT Gateway
From: Tyler Baker <[email protected]>
The Compulab IoT Gateway is based on an NXP i.MX7D, dual core Cortex-A7 clocking at 1GHz. It supports up to 2GB of DDR3, and 32GB of eMMC flash. Onboard, there are two gigabit ethernet controllers, 4 x USB2, RS485, and CAN.
It uses the same SoM as the cl-som-imx7, but includes a baseboard with additional I/O.
Compulab has provided patches for this platform based on v4.1. I've used these patches as reference to get things working on tip.
Changes for v1 (Requested by Fabio)
* Squashed the dts build into the initial patch
* Dropped the phy refclk patch from this series, submitting to PCI list
* Removed fsl,spi-num-chipselects property
* Removed LCD and DVI nodes, will follow up with a later series
* s/fsl,uart-has-rtscts/uart-has-rtscts/g
* Fixed regulator usage inside of simple-bus
The entire series is based on v4.15-rc2.
Tyler Baker (6):
ARM: dts: imx7d-sbc-iot: add initial iot gateway dts
ARM: dts: imx7d-cl-som: add nodes for usbh, and usbotg2
ARM: dts: imx7s: add dma support
ARM: dts: imx7s: add node and supplies for vdd1p2
ARM: dts: imx7d-sbc-iot: enable PCIe peripheral
ARM: dts: imx7s: add usb hsic phy domain
arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 34 +++++-- arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts | 169 +++++++++++++++++++++++++++++++ arch/arm/boot/dts/imx7s.dtsi | 29 +++++- 4 files changed, 225 insertions(+), 8 deletions(-) create mode 100644 arch/arm/boot/dts/imx7d-sbc-iot-imx7.dts
Signature · 1 line
2.9.3