ddr: marvell: update DDR driver
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v2 Latest4 patches 0 repliesNew
- v11 patch 0 repliesSuperseded
Changes in v2 from the cover letter
- Update tODT_OFF_WR as well
- Added patches 2-4
Patches in v2 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/4 | ddr: marvell: only assert M_ODT[0] on write for a single CSdrivers/ drivers/ drivers/ | +13 | 0 replies | |
| 2/4 | ddr: marvell: use correct TREFI valuedrivers/ | +1 | 0 replies | |
| 3/4 | ddr: marvell: update additional ODT settingdrivers/ | +14 | 0 replies | |
| 4/4 | ddr: marvell: update ddr controller init and freqdrivers/ drivers/ drivers/ | +34 | 0 replies |
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.
Cover letter [U-Boot] [PATCH v2 0/4] ddr: marvell: update DDR driver
I have a custom board that sees correctable ECC errors (when running memtester[1] from Linux). When I used Marvell's bootloader I didn't see the errors.
I've also had a tame hardware engineer (if there is such a thing) looking at the timing waveforms comparing the stock u-boot behaviour against Marvell's bootloader.
The changes for this series have been derived by comparing scope captures and register output between the same system running stock u-boot and Marvell's USP.
Changes in v2:
- Update tODT_OFF_WR as well
- Added patches 2-4
Chris Packham (4):
ddr: marvell: only assert M_ODT[0] on write for a single CS
ddr: marvell: use correct TREFI value
ddr: marvell: update additional ODT setting
ddr: marvell: update ddr controller init and freq
drivers/ddr/marvell/a38x/ddr3_init.h | 3 +- drivers/ddr/marvell/a38x/ddr3_topology_def.h | 3 +- drivers/ddr/marvell/a38x/ddr3_training.c | 50 +++++++++++++++--------- drivers/ddr/marvell/a38x/ddr3_training_db.c | 19 +++++---- drivers/ddr/marvell/a38x/ddr3_training_hw_algo.c | 22 +++++++---- drivers/ddr/marvell/a38x/ddr3_training_static.c | 3 +- 6 files changed, 62 insertions(+), 38 deletions(-)
Signature · 1 line
2.15.1