Skip to content

Add support for the Purism Librem5 devkit

Angus Ainslie (Purism) linux-arm-kernel linux-devicetree lkml 16 versions – Applied

Status from this message: Applied all, thanks.

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v16 Latest3 patches 3 repliesApplied
  2. v153 patches 4 repliesSuperseded
  3. v143 patches 2 repliesSuperseded
Earlier versions · 13
VersionPostedPatchesRepliesStatus
v134 patches7 repliesSuperseded
v124 patches4 repliesSuperseded
v114 patches2 repliesSuperseded
v104 patches3 repliesSuperseded
v93 patches4 repliesSuperseded
v83 patches2 repliesSuperseded
v73 patches0 repliesSuperseded
v63 patches1 replySuperseded
v53 patches5 repliesSuperseded
v42 patches8 repliesSuperseded
v32 patches1 replySuperseded
v22 patches3 repliesSuperseded
v13 patches10 repliesSuperseded

Patches in v16 Applied

#Subject and filesSizeRepliesApplied
1/3arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkitarch/arm64/boot/dts/freescale/Makefile arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts+807 -01 reply
2/3dt-bindings: Add an entry for Purism SPCDocumentation/devicetree/bindings/vendor-prefixes.yaml+2 -00 replies
3/3dt-bindings: arm: fsl: Add the imx8mq boardsDocumentation/devicetree/bindings/arm/fsl.yaml+7 -00 replies

Reviews trailers per patch

All 3 patches have a Reviewed-by or Acked-by.

PatchFabio EstevamRob HerringPavel Machek
1/3R-b R-b
2/3R-b
3/3R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 3 reviewers.

Read the v16 thread

Cover letter [PATCH v16 0/3] Add support for the Purism Librem5 devkit

The Librem5 devkit is based on the imx8mq from NXP. This is a default devicetree to boot the board to a command prompt.

Changes since v15:

Update the ti,minimum-sys-voltage for the PMIC.

Changes since v14:

Add regulator-always-on for the SNVS regulators.
Added pgc nodes.
Fixed charger pre-current.

Changes since v13:

Moved haptic motor from pwm-led to gpio-vibrator.
Cleaned up regulator node naming.
Whitescpace cleanup.
Re-indent pinmux stanzas.
Drop pwm2 node.
Drop MAINTAINERS patch.

Changes since v12:

Updated patch to vendor-prefixes.yaml.
Dropped always on from regulators.

Changes since v11:

Added reviewed-by tags.
Fixed subject typo.

Changes since v10:

Moved MAINTAINERS entry to "ARM/FREESCALE IMX" section

Changes since v9:

Added a MAINTAINERS entry for arm64 imx devicetree files.

Changes since v8:

Fixed license comment.
Changed regulators to all lower case.
Changed clock frequency for NXP errata e7805.
Dropped blank line.

Changes since v7:

More regulators always on for USB.
Add vbus regulator.
Drop vbat regulator.
Replace legacy "gpio-key,wakeup" with "wakeup-source".
Add vbus-supply to get rid of warning
imx8mq-usb-phy 382f0040.usb-phy: 382f0040.usb-phy supply vbus not found, using dummy regulator

Changes since v6:

Dropped unused regulators.
Fix regulator phandles case.
Dropped extra whitespace.

Changes since v5:

Added reviewed-by tags.
Moved USB port links to USB controller node.

Changes since v4:

Compiled against linux-next next-20190415. Added imx8mq to the arm yaml file.
Re-arrange regulator nodes to drop undefined supplies. Additional ordering for aesthetics.
Split some long lines.
Added lots of blank lines.
Moved pinctl muxes to where they are used. Cleaned out reg defintions from regulator nodes.

Changes since v3:

Freshly sorted and pressed nodes.
Change the backlight to an interpolated scale.
Dropped i2c2.
Dropped devkit version number to match debian MR.

Changes since v2:

Fixed incorrect phy-supply for the fsl-fec.
Dropped unused regulator property.
Fixup Makefile for linux-next.

Changes since v1:

Dropped config file.
Updated the board compatible label.
Changed node names to follow naming conventions.
Added a more complete regulator hierachy.
Removed unused nodes.
Removed unknown devices.
Fixed comment style.
Dropped undocumented properties.

Angus Ainslie (Purism) (3):
arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit
dt-bindings: Add an entry for Purism SPC
dt-bindings: arm: fsl: Add the imx8mq boards

 .../devicetree/bindings/arm/fsl.yaml          |   7 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx8mq-librem5-devkit.dts   | 806 ++++++++++++++++++
 4 files changed, 816 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
Signature · 1 line
2.17.1