ti-sysc changes to probe devices with dts data only
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest14 patches 8 repliesIn review
Patches in v1 No applies recorded yet
Reviews trailers per patch
1 of 14 patches has a Reviewed-by or Acked-by.
| Patch | Rob Herring |
|---|---|
| 1/14 | |
| 2/14 | R-b |
| 3/14 | |
| 4/14 | |
| 5/14 | |
| 6/14 | |
| 7/14 | |
| 8/14 | |
| 9/14 | |
| 10/14 | |
| 11/14 | |
| 12/14 | |
| 13/14 | |
| 14/14 |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH 00/14] ti-sysc changes to probe devices with dts data only
Hi all,
Here are some ti-sysc interconnect target module changes that allow dropping legacy platform data for many devices in favor of devicetree provided data.
This series depends on patch series "[PATCH 0/7] omap changes to allocate struct omap_hwmod dynamically".
I'll be posting patches separately to drop platform data. Meanwhile, the easiest way to test this series is to just temporarily comment out selected platform data entries one driver at a time. This can be done in the SoC specific struct omap_hwmod_ocp_if array at the end of the arch/arm/mach-omap2/omap_hwmod_*_data.c files.
Note that we are not yet handling all the quirks yet listed in arch/arm/mach-omap2/omap_hwmod.h in "omap_hwmod.flags definitions". We currently do not yet handle quirks for devices with:
HWMOD_NO_OCP_AUTOIDLEHWMOD_NO_IDLESTHWMOD_BLOCK_WFIHWMOD_FORCE_MSTANDBYHWMOD_RECONFIG_IO_CHAINHWMOD_CLKDM_NOAUTO
I'll be posting patches for these later on as needed.
Regards,
Tony
Tony Lindgren (14):
bus: ti-sysc: Fix sysc_unprepare() when no clocks have been allocated
bus: ti-sysc: Handle missed no-idle property in addition to
no-idle-on-init
bus: ti-sysc: Make functions static
bus: ti-sysc: Move legacy platform data idling into separate functions
bus: ti-sysc: Add separate functions for handling clocks
bus: ti-sysc: Enable all clocks directly during init to read revision
bus: ti-sysc: Allocate mdata as needed and do platform data based init
later
bus: ti-sysc: Manage clocks for the interconnect target module in all
cases
bus: ti-sysc: Move rstctrl reset to happen later
bus: ti-sysc: Add support for early quirks based on register address
bus: ti-sysc: Add quirk handling for external optional functional
clock
bus: ti-sysc: Pass clockactivity quirk to platform functions
bus: ti-sysc: Handle swsup idle mode quirks
bus: ti-sysc: Detect DMIC for debugging
.../devicetree/bindings/bus/ti-sysc.txt | 2 + arch/arm/mach-omap2/omap_hwmod.c | 10 + drivers/bus/ti-sysc.c | 537 ++++++++++++++---- include/linux/platform_data/ti-sysc.h | 9 +- 4 files changed, 438 insertions(+), 120 deletions(-)
Signature · 1 line
2.21.0