Skip to content

rockchip: rk3399: Use spl_board_init in SPL, TPL

Jagan Teki linux-rockchip u-boot 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest0 of 8 patches 0 repliesNew
  2. v10 of 8 patches 0 repliesSuperseded

Patches in v2 No applies recorded yet

None of the 8 patches the cover letter announces are in this archive.

Reviews trailers per patch

PatchKever Yang
SeriesR-b R-b R-b R-b R-b R-b R-b R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/8] rockchip: rk3399: Use spl_board_init in SPL, TPL

This is v2 set for previous v1. No much diff, except the latest rebase.

Usually spl_board_init has preloader_console_init which would help to print boot up banner during SPL and TPL.

The current rk3399 lacking that in few of the boards, this series make reuse of spl_board_init in SPL and TPL stages.

with this series:
================

U-Boot TPL 2019.07-rc1-00243-g3f0cad6bd2 (May 08 2019 - 11:29:32 +0530) Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2019.07-rc1-00243-g3f0cad6bd2 (May 08 2019 - 11:29:32 +0530) Trying to boot from MMC1

U-Boot 2019.07-rc1-00243-g3f0cad6bd2 (May 08 2019 - 11:29:32 +0530)

Model: FriendlyElec NanoPC-T4
DRAM:  3.9 GiB
MMC:   dwmmc@fe310000: 2, dwmmc@fe320000: 1, sdhci@fe330000: 0

Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial@ff1a0000
Out:   serial@ff1a0000
Err:   serial@ff1a0000
Model: FriendlyElec NanoPC-T4
Net:   eth0: ethernet@fe300000
Hit any key to stop autoboot:  0 

=>

without this series:
===================

U-Boot TPL board init
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL board init
Trying to boot from MMC1

U-Boot 2019.07-rc1-00243-g3f0cad6bd2 (May 08 2019 - 11:29:32 +0530)

Model: FriendlyElec NanoPC-T4
DRAM:  3.9 GiB
MMC:   dwmmc@fe310000: 2, dwmmc@fe320000: 1, sdhci@fe330000: 0

Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial@ff1a0000
Out:   serial@ff1a0000
Err:   serial@ff1a0000
Model: FriendlyElec NanoPC-T4
Net:   eth0: ethernet@fe300000
Hit any key to stop autoboot:  0 

=>

Any inputs?
Jagan.

Jagan Teki (8):
board: rk3399: Drop explicit uart enablement in spl_board_init
rockchip: rk3399: Support common spl_board_init
rockchip: rk3399: spl: Mark printascii into debug
rockchip: rk3399: Move u-boot, dm-pre-reloc of uart0, uart2
rockchip: rk3399: Enable SPL_BOARD_INIT
rockchip: rk3399: tpl: Add spl_board_init
rockchip: rk3399: tpl: Mark printascii into debug
rockchip: rk3399: Enable TPL_BOARD_INIT

 arch/arm/dts/rk3399-gru.dtsi                  |  1 -
 arch/arm/dts/rk3399-puma.dtsi                 |  1 -
 arch/arm/dts/rk3399-u-boot.dtsi               |  8 +++
 arch/arm/mach-rockchip/Kconfig                |  2 +
 arch/arm/mach-rockchip/rk3399-board-spl.c     | 65 ++++++++++++++++++-
 arch/arm/mach-rockchip/rk3399-board-tpl.c     |  9 ++-
 board/rockchip/evb_rk3399/evb-rk3399.c        | 29 ---------
 .../puma_rk3399/puma-rk3399.c                 | 58 -----------------
 board/vamrs/rock960_rk3399/rock960-rk3399.c   | 31 ---------
 configs/puma-rk3399_defconfig                 |  1 -
 10 files changed, 82 insertions(+), 123 deletions(-)
Signature · 6 lines
2.18.0.321.gffc6fa0e3

_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot