Skip to content

davinci: omapl138-lcdk: enable CONFIG_SPL_DM

Bartosz Golaszewski u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest4 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4davinci: omapl138-lcdk: enable SPL_SYS_MALLOC_SIMPLEconfigs/omapl138_lcdk_defconfig+1 -00 replies
2/4davinci: omapl138-lcdk: enable CONFIG_USE_TINY_PRINTFconfigs/omapl138_lcdk_defconfig+1 -00 replies
3/4davinci: omapl138-lcdk: remove unneeded includesboard/davinci/da8xxevm/omapl138_lcdk.c+0 -20 replies
4/4davinci: omapl138-lcdk: enable driver-model in SPLboard/davinci/da8xxevm/omapl138_lcdk.c configs/omapl138_lcdk_defconfig+21 -01 reply
4/4davinci: omapl138-lcdk: enable driver-model in SPL+0 -01 reply
4/4davinci: omapl138-lcdk: enable driver-model in SPL+0 -01 reply
4/4davinci: omapl138-lcdk: enable driver-model in SPL+0 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [U-Boot] [PATCH 0/4] davinci: omapl138-lcdk: enable CONFIG_SPL_DM

From: Bartosz Golaszewski <[email protected]>

This series enables the driver model in SPL on omapl138-lcdk. First two patches enable size-reducing options in defconfig. The third patch is just a cleanup of the board file. Last patch enables the driver model and defines the serial device so that we don't have to disable CONFIG_SPL_DM_SERIAL which is enabled by default when selecting CONFIG_SPL_DM.

Bartosz Golaszewski (4):
davinci: omapl138-lcdk: enable SPL_SYS_MALLOC_SIMPLE
davinci: omapl138-lcdk: enable CONFIG_USE_TINY_PRINTF
davinci: omapl138-lcdk: remove unneeded includes
davinci: omapl138-lcdk: enable driver-model in SPL

 board/davinci/da8xxevm/omapl138_lcdk.c | 18 ++++++++++++++++--
 configs/omapl138_lcdk_defconfig        |  7 +++++++
 2 files changed, 23 insertions(+), 2 deletions(-)
Signature · 1 line
2.21.0