Skip to content

apalis-tk1: fixes/updates for v2019.10

Igor Opaniuk u-boot 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest9 patches 0 repliesNew

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/9apalis-tk1: do not explicitly release reset_moci#board/toradex/apalis-tk1/pinmux-config-apalis-tk1.h+1 -11 reply
2/9apalis-tk1: set apalis gpio 8 aka fan_enboard/toradex/apalis-tk1/apalis-tk1.c+10 -01 reply
3/9apalis-tk1: provide proper USB vendor idconfigs/apalis-tk1_defconfig+1 -11 reply
4/9apalis-tk1: enable user debug by defaultinclude/configs/apalis-tk1.h+2 -10 replies
5/9apalis-tk1: add pcie_aspm=off to defargsinclude/configs/apalis-tk1.h+1 -11 reply
6/9apalis-tk1: switch to zImageinclude/configs/apalis-tk1.h+6 -61 reply
7/9apalis-tk1/t30: colibri_t30: display reset reasonarch/arm/mach-tegra/sys_info.c+22 -100 replies
8/9apalis-tk1: remove default vesa vga mode from vidargsinclude/configs/apalis-tk1.h+1 -11 reply
9/9apalis-tk1: remove non-esential power rails on bootarch/arm/mach-tegra/tegra124/cpu.c board/toradex/apalis-tk1/as3722_init.c+68 -01 reply

Reviews trailers per patch

7 of 9 patches have a Reviewed-by or Acked-by.

PatchOleksandr Suvorov
1/9R-b
2/9R-b
3/9R-b
4/9
5/9R-b
6/9R-b
7/9
8/9R-b
9/9R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [U-Boot] [PATCH v1 0/9] apalis-tk1: fixes/updates for v2019.10

Misc. fixes related to pinmux configuration (fan), default bootargs, reset reason output and power rail configuration.

Dominik Sliwa (2):
apalis-tk1/t30: colibri_t30: display reset reason
apalis-tk1: remove non-esential power rails on boot

Igor Opaniuk (5):
apalis-tk1: set apalis gpio 8 aka fan_en
apalis-tk1: provide proper USB vendor id
apalis-tk1: enable user debug by default
apalis-tk1: add pcie_aspm=off to defargs
apalis-tk1: switch to zImage

Marcel Ziswiler (2):
apalis-tk1: do not explicitly release reset_moci#
apalis-tk1: remove default vesa vga mode from vidargs

 arch/arm/mach-tegra/sys_info.c                | 32 ++++++++-----
 arch/arm/mach-tegra/tegra124/cpu.c            | 45 +++++++++++++++++++
 board/toradex/apalis-tk1/apalis-tk1.c         | 10 +++++
 board/toradex/apalis-tk1/as3722_init.c        | 23 ++++++++++
 .../apalis-tk1/pinmux-config-apalis-tk1.h     |  2 +-
 configs/apalis-tk1_defconfig                  |  2 +-
 include/configs/apalis-tk1.h                  | 17 +++----
 7 files changed, 111 insertions(+), 20 deletions(-)
Signature · 1 line
2.17.1