Skip to content

Add bluetooth support for Orange Pi 3

[email protected] linux-arm-kernel linux-devicetree lkml 3 versions – Applied

Status from this message: Applied both, thanks!

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v1 Latest posting 3/32 patches 1 replyApplied
  2. v1 posting 2/35 patches 9 repliesSuperseded
  3. v1 posting 1/36 patches 11 repliesSuperseded

Patches in v1 posting 3/3 Applied

#Subject and filesSizeRepliesApplied
1/2arm64: dts: allwinner: h6: Add pin configs for uart1arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi+10 -00 replies
2/2arm64: dts: allwinner: orange-pi-3: Enable UART1 / Bluetootharch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts+19 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [RESEND PATCH 0/2] Add bluetooth support for Orange Pi 3

From: Ondrej Jirman <[email protected]>

(Re-send for Maxime, with already applied patches dropped. Nothing new.)

This series implements bluetooth support for Xunlong Orange Pi 3 board.

The board uses AP6256 WiFi/BT 5.0 chip.

Summary of changes:

- add more delay to let initialize the chip
- let the kernel detect firmware file path
- add new compatible and update dt-bindings
- update Orange Pi 3 / H6 DTS

Please take a look.

thank you and regards,
Ondrej Jirman

Ondrej Jirman (2):
arm64: dts: allwinner: h6: Add pin configs for uart1
arm64: dts: allwinner: orange-pi-3: Enable UART1 / Bluetooth

 .../dts/allwinner/sun50i-h6-orangepi-3.dts    | 19 +++++++++++++++++++
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi  | 10 ++++++++++
Signature · 1 line
2.23.0