misc: Add AVS class 0 support for AM6
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v3 Latest posting 2/20 of 18 patches 0 repliesNew
- v3 posting 1/218 patches 0 repliesSuperseded
- v210 patches 0 repliesSuperseded
Earlier versions · 1
| Version | Posted | Patches | Replies | Status |
|---|---|---|---|---|
| v1 | 10 patches | 0 replies | Superseded |
Patches in v3 posting 2/2 No applies recorded yet
None of the 18 patches the cover letter announces are in this archive.
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.
Cover letter [U-Boot] [PATCH v3 00/18] misc: Add AVS class 0 support for AM6
Quoted 16 lines · Lokesh Vutla
Quoted 4 lines · Keerthy
Adaptive Voltage Scaling is a technology used in TI SoCs to optimize the operating voltage based on characterization data written to efuse during production.
Quoted 8 lines
Add support for Adaptive Voltage scaling class 0 support for AM6 family of devices. Adaptive voltage scaling class 0 implies that optimized voltage values for a particular OPP of a particular voltage domain are read from Efuse and programmed on the pmic/regulator.
Tested on AM654-EVM for MPU @800 MHz.
Tested on J721e-evm for MPU.
Quoted 6 lines
For the entire series:
Reviewed-by Lokesh Vutla <[email protected]>Thanks and regards,
Lokesh
Tom,
If no further comments can this series be pulled in?
- Keerthy
Quoted 68 lines
Quoted 68 lines
The series is based on top of the branch:
https://github.com/lokeshvutla/u-boot/tree/devel/j721e-full-boot
Changes in v3:
* Extended the support for j721e-evm.
* Moved vtm node under r5-board dts.Changes in v2:
* Avoided creation of new uclass. AVS driver is now under misc.
Keerthy (11):
clk: clk-ti-sci: Notify AVS driver upon setting clock rate
misc:k3_avs: Add j721e support
power: pmic: tps65941: Add support for tps65941 family of PMICs
power: regulator: tps65941: add regulator support
arm: mach-k3:am6_init: Initialize AVS class 0
arm: mach-k3:j721e_init: Initialize avs class 0
arm: dts: k3-am654-r5-base-board: Add VTM node
arm: dts: k3-j721e-r5-common-proc-board: Add VTM node
arm: dts: k3-j721e-r5-common: Add tps65941 node and dependent
wkup_i2c0node
arm: dts: k3-j721e-r5-common-proc-board: Hookbuck12_regto vtm supply
configs:j721e_evm_r5_defconfig: Enable AVS Class 0 & dependent
configsTero Kristo (7):
misc:k3_avs: add driver for K3 Adaptive Voltage Scaling Class 0
power: regulator: tps6236x: add support for tps6236x regulators
arm: dts: k3-am654-r5-base-board: enablewkup_i2c0driver for spl
arm: dts: k3-am654-r5-base-board: add supply rail for MPU
arm: dts: k3-am654-r5-base-board: enablewkup_vtm0node and link in
supplies
configs:am65x_evm_r5_defconfig: Enable TPS62363 regulator support
configs:am65x_evm_r5_defconfig: Enable AVS class 0 supportarch/arm/dts/k3-am654-r5-base-board.dts | 27 ++ arch/arm/dts/k3-j721e-mcu-wakeup.dtsi | 11 + .../arm/dts/k3-j721e-r5-common-proc-board.dts | 44 ++ arch/arm/mach-k3/am6_init.c | 7 + arch/arm/mach-k3/j721e_init.c | 7 + configs/am65x_evm_r5_defconfig | 2 + configs/j721e_evm_r5_defconfig | 9 + drivers/clk/clk-ti-sci.c | 5 + drivers/misc/Kconfig | 9 + drivers/misc/Makefile | 1 + drivers/misc/k3_avs.c | 388 +++++++++++++++++ drivers/power/pmic/Kconfig | 7 + drivers/power/pmic/Makefile | 1 + drivers/power/pmic/tps65941.c | 83 ++++ drivers/power/regulator/Kconfig | 20 + drivers/power/regulator/Makefile | 2 + drivers/power/regulator/tps62360_regulator.c | 123 ++++++ drivers/power/regulator/tps65941_regulator.c | 407 ++++++++++++++++++ include/k3-avs.h | 30 ++ include/power/tps65941.h | 26 ++ 20 files changed, 1209 insertions(+)create mode 100644
drivers/misc/k3_avs.c
create mode 100644drivers/power/pmic/tps65941.ccreate mode 100644drivers/power/regulator/tps62360_regulator.ccreate mode 100644drivers/power/regulator/tps65941_regulator.ccreate mode 100644include/k3-avs.h
create mode 100644include/power/tps65941.h