Skip to content

ARM: dts: ls1021a: define and use external interrupt lines

Rasmus Villemoes linux-arm-kernel linux-devicetree lkml netdev 2 versions – Applied

Status from this message: Applied both, thanks.

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 4 repliesApplied
  2. v12 patches 6 repliesSuperseded

Patches in v2 Applied

#Subject and filesSizeRepliesApplied
1/2ARM: dts: ls1021a: add node describing external interrupt linesarch/arm/boot/dts/ls1021a.dtsi+19 -00 replies
2/2ARM: dts: ls1021a-tsn: Use interrupts for the SGMII PHYsarch/arm/boot/dts/ls1021a-tsn.dts+4 -01 reply

Reviews trailers per patch

1 of 2 patches has a Reviewed-by or Acked-by.

PatchAndrew Lunn
1/2
2/2R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v2 thread

Cover letter [PATCH v2 0/2] ARM: dts: ls1021a: define and use external interrupt lines

A device tree binding documentation as well as a driver implementing support for the external interrupt lines on the ls1021a has been merged into irqchip-next, so will very likely appear in v5.5. See

87cd38dfd9e6 dt/bindings: Add bindings for Layerscape external irqs 0dcd9f872769 irqchip: Add support for Layerscape external interrupt lines

present in next-20191114.

These patches simply add the extirq node to the ls1021a.dtsi and make use of it on the LS1021A-TSN board. I hope these can be picked up so they also land in v5.5, so we don't have to wait a full extra release cycle.

v2: fix interrupt type in 2/2 (s/IRQ_TYPE_EDGE_FALLING/IRQ_TYPE_LEVEL_LOW/).

Rasmus Villemoes (1):
ARM: dts: ls1021a: add node describing external interrupt lines

Vladimir Oltean (1):
ARM: dts: ls1021a-tsn: Use interrupts for the SGMII PHYs

 arch/arm/boot/dts/ls1021a-tsn.dts |  4 ++++
 arch/arm/boot/dts/ls1021a.dtsi    | 19 +++++++++++++++++++
 2 files changed, 23 insertions(+)
Signature · 1 line
2.23.0