Skip to content

board: ti: beagleboneai: add initial support

Caleb Robey u-boot 3 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest5 patches 0 repliesNew
  2. v25 patches 0 repliesSuperseded
  3. v15 patches 0 repliesSuperseded

Changes in v3 from the cover letter

- Swapped order of 2 and 3 to assure no patch breaks the build
- aligned dts file with the one found in the latest release of psdk 06.02

Patches in v3 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5board: ti: beagleboneai: emmc read changesboard/ti/am57xx/board.c board/ti/am57xx/mux_data.h board/ti/common/board_detect.c +1 more+138 -00 replies
2/5board: ti: beagleboneai: IODELAY and pinmuxboard/ti/am57xx/mux_data.h+264 -00 replies
3/5board: ti: beagleboneai: add initial supportarch/arm/mach-omap2/omap5/hw_data.c board/ti/am57xx/board.c include/configs/am57xx_evm.h+24 -20 replies
4/5board: ti: beagleboneai: add dts filearch/arm/dts/Makefile arch/arm/dts/am5729-beagleboneai.dts+577 -00 replies
5/5board: ti: beagleboneai: enable in am57xx_evm_defconfigconfigs/am57xx_evm_defconfig include/environment/ti/boot.h+4 -10 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [PATCH v3 0/5] board: ti: beagleboneai: add initial support

The following patches

1) Introduce the emmc based board detection for BBAI due to a lack of
eeprom onboard the BBAI (to be fixed in future revision of the board).
2) Add structures in the pinctrl to detect the beaglebone AI and add checks for the beaglebone AI in the board detection scheme
3) Minor changes to files to support dts and bbai boot overall
4) Add device tree file for BeagleBone AI
5) Enable beaglebone ai in am57xx_evm_defconfig

Device tree has gone to mainline kernel found here:
https://patchwork.kernel.org/patch/11254903/

v2 Changes:
- Introduced missed additions in board.c that allow the actual configuration of the BBAI when detected. I also removed the hardcoded change of uart0 serial confirution and added a CONFIG_PREBOOT variable to do the board detect and setenv of the console variable

v3 Changes:
- Swapped order of 2 and 3 to assure no patch breaks the build
- aligned dts file with the one found in the latest release of psdk 06.02

Caleb Robey (5):
board: ti: beagleboneai: emmc read changes
board: ti: beagleboneai: IODELAY and pinmux
board: ti: beagleboneai: add initial support
board: ti: beagleboneai: add dts file
board: ti: beagleboneai: enable in am57xx_evm_defconfig

 arch/arm/dts/Makefile                |   1 +
 arch/arm/dts/am5729-beagleboneai.dts | 576 +++++++++++++++++++++++++++
 arch/arm/mach-omap2/omap5/hw_data.c  |   1 +
 board/ti/am57xx/board.c              |  61 ++-
 board/ti/am57xx/mux_data.h           | 280 +++++++++++++
 board/ti/common/board_detect.c       |  76 ++++
 board/ti/common/board_detect.h       |   9 +
 configs/am57xx_evm_defconfig         |   3 +-
 include/configs/am57xx_evm.h         |   1 -
 include/environment/ti/boot.h        |   2 +
 10 files changed, 1007 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/dts/am5729-beagleboneai.dts
Signature · 1 line
2.17.1