Skip to content

arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support

Roger Quadros linux-devicetree lkml 4 versions – Applied

Status from this message: Queued up for 5.9, thanks.

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest6 patches 3 repliesApplied
  2. v37 patches 7 repliesSuperseded
  3. v26 patches 4 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v15 patches4 repliesSuperseded

Changes in v4 from the cover letter

- Removed redundant patch
- used compaible string for yaml filename
- typo fix s/mdf/mfd in patch subject
- added simple-mfd, address-cells, size-cells and ranges

Patches in v4 Applied

#Subject and filesSizeRepliesApplied
1/6dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controllerDocumentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml+74 -01 reply
2/6arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodesarch/arm64/boot/dts/ti/k3-j721e-main.dtsi+241 -00 replies
3/6arm64: dts: ti: k3-j721e-main: Add system controller node and SERDES lane muxarch/arm64/boot/dts/ti/k3-j721e-main.dtsi include/dt-bindings/mux/mux-j721e-wiz.h+80 -01 reply
4/6arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUXarch/arm64/boot/dts/ti/k3-j721e-main.dtsi+7 -00 replies
5/6arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts+30 -20 replies
6/6arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR linearch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts+1 -00 replies

Reviews trailers per patch

2 of 6 patches have a Reviewed-by or Acked-by.

PatchRob Herring
1/6R-b
2/6
3/6A-b
4/6
5/6
6/6

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v4 thread

Cover letter [PATCH v4 0/6] arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support

Hi Tero,

This series adds SERDES PHY support and Type-C USB Super-Speed support to the J721E EVM.

Please queue this for -next. Thanks.

cheers,
-roger

Changelog:
v4:
- Removed redundant patch
- used compaible string for yaml filename
- typo fix s/mdf/mfd in patch subject
- added simple-mfd, address-cells, size-cells and ranges

v3:
- Add new DT schema for J721E System controller.
- Re-order system controller's compatible string i.e. most compatible to least.

v2:
- Addressed Rob's comments.
- Changed type-C debounce delay from 300ms to 700ms as 300ms is not sufficient on EVM.

Kishon Vijay Abraham I (2):
arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes
arm64: dts: ti: k3-j721e-main: Add system controller node and SERDES
lane mux

Roger Quadros (4):
dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system
controller
arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX
arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0
arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR
line

 .../mfd/ti,j721e-system-controller.yaml       |  74 +++++
 .../dts/ti/k3-j721e-common-proc-board.dts     |  33 ++-
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 275 ++++++++++++++++++
 include/dt-bindings/mux/mux-j721e-wiz.h       |  53 ++++
 4 files changed, 433 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/ti,j721e-system-controller.yaml
 create mode 100644 include/dt-bindings/mux/mux-j721e-wiz.h
Signature · 2 lines
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki