Skip to content

hwmon: k10temp driver improvements

Guenter Roeck linux-hwmon lkml 4 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest6 patches 5 repliesIn review
  2. v35 patches 0 repliesSuperseded
  3. v25 patches 10 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v14 patches17 repliesSuperseded

Patches in v4 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/6hwmon: (k10temp) Use bitopsdrivers/hwmon/k10temp.c+10 -60 replies
2/6hmon: (k10temp) Convert to use devm_hwmon_device_register_with_infodrivers/hwmon/k10temp.c+112 -1010 replies
3/6hwmon: (k10temp) Report temperatures per CPU diedrivers/hwmon/k10temp.c+79 -10 replies
4/6hwmon: (k10temp) Show core and SoC current and voltages on Ryzen CPUsdrivers/hwmon/k10temp.c+131 -30 replies
5/6hwmon: (k10temp) Don't show temperature limits on Ryzen (Zen) CPUsdrivers/hwmon/k10temp.c+1 -10 replies
6/6hwmon: (k10temp) Add debugfs supportdrivers/hwmon/k10temp.c+77 -12 replies

Reviews trailers per patch

None of the 6 patches has a Reviewed-by or Acked-by.

PatchBrad CampbellBernhard GebetsbergerHolger KiehlMichael LarabelJonathan McDowellKen MoffatDarren SaltSebastian Reichel
SeriesT-b
1/6T-b T-b T-b T-b T-b T-b T-b
2/6T-b T-b T-b T-b T-b T-b T-b
3/6T-b T-b T-b T-b T-b T-b T-b
4/6T-b T-b T-b T-b T-b T-b T-b
5/6T-b T-b T-b T-b T-b
6/6

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 8 reviewers.

Read the v4 thread

Cover letter [PATCH v4 0/6] hwmon: k10temp driver improvements

This patch series implements various improvements for the k10temp driver.

Patch 1/6 introduces the use of bit operations.

Patch 2/6 converts the driver to use the devm_hwmon_device_register_with_info API. This not only simplifies the code and reduces its size, it also makes the code easier to maintain and enhance.

Patch 3/6 adds support for reporting Core Complex Die (CCD) temperatures on Zen2 (Ryzen and Threadripper) CPUs (note that reporting is incomplete for Threadripper CPUs - it is known that additional temperature sensors exist, but the register locations are unknown).

Patch 4/6 adds support for reporting core and SoC current and voltage information on Ryzen CPUs (note: voltage and current measurements for Threadripper and EPYC CPUs are known to exist, but register locations are unknown, and values are therefore not reported at this time).

Patch 5/6 removes the maximum temperature from Tdie for Ryzen CPUs. It is inaccurate, misleading, and it just doesn't make sense to report wrong information.

Patch 6/6 adds debugfs files to provide raw thermal and SVI register dumps. This may help in the future to identify additional sensors and/or to fix problems.

With all patches in place, output on Ryzen 3900X CPUs looks as follows (with the system under load).

k10temp-pci-00c3

Adapter: PCI adapter
Vcore:        +1.39 V
Vsoc:         +1.18 V
Tdie:         +79.9°C
Tctl:         +79.9°C
Tccd1:        +61.8°C
Tccd2:        +76.5°C
Icore:       +46.00 A
Isoc:        +12.00 A

The voltage and current information is limited to Ryzen CPUs. Voltage and current reporting on Threadripper and EPYC CPUs is different, and the reported information is either incomplete or wrong. Exclude it for the time being; it can always be added if/when more information becomes available.

Tested with the following Ryzen CPUs:

    1300X A user with this CPU in the system reported somewhat unexpected
          values for Vcore; it isn't entirely if at all clear why that is
          the case. Overall this does not warrant holding up the series.
    1600
    1800X
    2200G
    2400G
    2700
    2700X
    2950X
    3600X
    3800X
    3900X
    3950X
    3970X
    EPYC 7302
    EPYC 7742

Many thanks to everyone who helped to test this series.

---
v4: Normalize current calculations do show 1A / LSB for core current and
0.25A / LSB for SoC current. The reported current values are board specific and need to be scaled using the configuration file. Clarified that the maximum temperature of 70 degrees C (which is no longer displayed) was associated to Tctl and not to Tdie. Added debugfs support.

v3: Added more Tested-by: tags
Added detection for 3970X, and report Tccd1 for this CPU.

v2: Added Tested-by: tags as received.
Don't display voltage and current information for Threadripper and EPYC. Stop displaying the fixed (and wrong) maximum temperature of 70 degrees C for Tdie on model 17h/18h CPUs.