Skip to contentSkip to conversation

hwmon: k10temp driver improvements

PATCH Superseded Guenter Roeck 6 participants 16 messages Jan 18, 2020 – Jan 21, 2020

Subsystems (2)

v2 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Guenter Roeck

author maintainer
#0 lore raw

v2 cover hwmon: k10temp driver improvements

This patch series implements various improvements for the k10temp driver.

Patch 1/5 introduces the use of bit operations.

Patch 2/5 converts the driver to use the devm_hwmon_device_register_with_info API. This not only simplifies the code and reduces its size, it also makes the code easier to maintain and enhance.

Patch 3/5 adds support for reporting Core Complex Die (CCD) temperatures on Ryzen 3 (Zen2) CPUs.

Patch 4/5 adds support for reporting core and SoC current and voltage information on Ryzen CPUs.

Patch 5/5 removes the maximum temperature from Tdie for Ryzen CPUs. It is inaccurate, misleading, and it just doesn't make sense to report wrong information.

With all patches in place, output on Ryzen 3900X CPUs looks as follows (with the system under load).

k10temp-pci-00c3

Adapter: PCI adapter
Vcore:        +1.36 V
Vsoc:         +1.18 V
Tdie:         +86.8°C
Tctl:         +86.8°C
Tccd1:        +80.0°C
Tccd2:        +81.8°C
Icore:       +44.14 A
Isoc:        +13.83 A

The voltage and current information is limited to Ryzen CPUs. Voltage and current reporting on Threadripper and EPYC CPUs is different, and the reported information is either incomplete or wrong. Exclude it for the time being; it can always be added if/when more information becomes available.

Tested with the following Ryzen CPUs:

    1300X A user with this CPU in the system reported somewhat unexpected
          values for Vcore; it isn't entirely if at all clear why that is
          the case. Overall this does not warrant holding up the series.
    1600
    1800X
    2200G
    2400G
    3800X
    3900X
    3950X

v2: Added tested-by: tags as received.
Don't display voltage and current information for Threadripper and EPYC. Stop displaying the fixed (and wrong) maximum temperature of 70 degrees C for Tdie on model 17h/18h CPUs.

author maintainer
#1 lore raw

PATCH v2 1/5 hwmon: (k10temp) Use bitops

Using bitops makes bit masks and shifts easier to read.

---
v2: Added Tested-by: tags

 drivers/hwmon/k10temp.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)
drivers/hwmon/k10temp.c +10 -6
index 5c1dddde193c..8807d7da68db 100644
@@ -5,6 +5,7 @@
  * Copyright (c) 2009 Clemens Ladisch <[email protected]>
  */
 
+#include <linux/bitops.h>
 #include <linux/err.h>
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
@@ -31,22 +32,22 @@ static DEFINE_MUTEX(nb_smu_ind_mutex);
 #endif
 
 /* CPUID function 0x80000001, ebx */
-#define CPUID_PKGTYPE_MASK	0xf0000000
+#define CPUID_PKGTYPE_MASK	GENMASK(31, 28)
 #define CPUID_PKGTYPE_F		0x00000000
 #define CPUID_PKGTYPE_AM2R2_AM3	0x10000000
 
 /* DRAM controller (PCI function 2) */
 #define REG_DCT0_CONFIG_HIGH		0x094
-#define  DDR3_MODE			0x00000100
+#define  DDR3_MODE			BIT(8)
 
 /* miscellaneous (PCI function 3) */
 #define REG_HARDWARE_THERMAL_CONTROL	0x64
-#define  HTC_ENABLE			0x00000001
+#define  HTC_ENABLE			BIT(0)
 
 #define REG_REPORTED_TEMPERATURE	0xa4
 
 #define REG_NORTHBRIDGE_CAPABILITIES	0xe8
-#define  NB_CAP_HTC			0x00000400
+#define  NB_CAP_HTC			BIT(10)
 
 /*
  * For F15h M60h and M70h, REG_HARDWARE_THERMAL_CONTROL
@@ -60,6 +61,9 @@ static DEFINE_MUTEX(nb_smu_ind_mutex);
 /* F17h M01h Access througn SMN */
 #define F17H_M01H_REPORTED_TEMP_CTRL_OFFSET	0x00059800
 
+#define CUR_TEMP_SHIFT				21
+#define CUR_TEMP_RANGE_SEL_MASK			BIT(19)
+
 struct k10temp_data {
 	struct pci_dev *pdev;
 	void (*read_htcreg)(struct pci_dev *pdev, u32 *regval);
@@ -129,7 +133,7 @@ static unsigned int get_raw_temp(struct k10temp_data *data)
 	u32 regval;
 
 	data->read_tempreg(data->pdev, &regval);
-	temp = (regval >> 21) * 125;
+	temp = (regval >> CUR_TEMP_SHIFT) * 125;
 	if (regval & data->temp_adjust_mask)
 		temp -= 49000;
 	return temp;
@@ -312,7 +316,7 @@ static int k10temp_probe(struct pci_dev *pdev,
 		data->read_htcreg = read_htcreg_nb_f15;
 		data->read_tempreg = read_tempreg_nb_f15;
 	} else if (boot_cpu_data.x86 == 0x17 || boot_cpu_data.x86 == 0x18) {
-		data->temp_adjust_mask = 0x80000;
+		data->temp_adjust_mask = CUR_TEMP_RANGE_SEL_MASK;
 		data->read_tempreg = read_tempreg_nb_f17;
 		data->show_tdie = true;
 	} else {
Signature · 1 line
2.17.1
author maintainer
#2 lore raw

PATCH v2 2/5 hmon: (k10temp) Convert to use devm_hwmon_device_register_with_info

In reply to Guenter Roeck

Convert driver to use devm_hwmon_device_register_with_info to simplify the code and to reduce its size.

Old size (x86_64):
text data bss dec hex filename
8247 4488 64 12799 31ff drivers/hwmon/k10temp.o
New size:
text data bss dec hex filename
6778 2792 64 9634 25a2 drivers/hwmon/k10temp.o

---
v2: Added Tested-by: tags

 drivers/hwmon/k10temp.c | 213 +++++++++++++++++++++-------------------
 1 file changed, 112 insertions(+), 101 deletions(-)
drivers/hwmon/k10temp.c +112 -101
index 8807d7da68db..c45f6498a59b 100644
@@ -1,14 +1,15 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * k10temp.c - AMD Family 10h/11h/12h/14h/15h/16h processor hardware monitoring
+ * k10temp.c - AMD Family 10h/11h/12h/14h/15h/16h/17h
+ *		processor hardware monitoring
  *
  * Copyright (c) 2009 Clemens Ladisch <[email protected]>
+ * Copyright (c) 2020 Guenter Roeck <[email protected]>
  */
 
 #include <linux/bitops.h>
 #include <linux/err.h>
 #include <linux/hwmon.h>
-#include <linux/hwmon-sysfs.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -127,10 +128,10 @@ static void read_tempreg_nb_f17(struct pci_dev *pdev, u32 *regval)
 		     F17H_M01H_REPORTED_TEMP_CTRL_OFFSET, regval);
 }
 
-static unsigned int get_raw_temp(struct k10temp_data *data)
+static long get_raw_temp(struct k10temp_data *data)
 {
-	unsigned int temp;
 	u32 regval;
+	long temp;
 
 	data->read_tempreg(data->pdev, &regval);
 	temp = (regval >> CUR_TEMP_SHIFT) * 125;
@@ -139,118 +140,108 @@ static unsigned int get_raw_temp(struct k10temp_data *data)
 	return temp;
 }
 
-static ssize_t temp1_input_show(struct device *dev,
-				struct device_attribute *attr, char *buf)
-{
-	struct k10temp_data *data = dev_get_drvdata(dev);
-	unsigned int temp = get_raw_temp(data);
-
-	if (temp > data->temp_offset)
-		temp -= data->temp_offset;
-	else
-		temp = 0;
-
-	return sprintf(buf, "%u\n", temp);
-}
-
-static ssize_t temp2_input_show(struct device *dev,
-				struct device_attribute *devattr, char *buf)
-{
-	struct k10temp_data *data = dev_get_drvdata(dev);
-	unsigned int temp = get_raw_temp(data);
-
-	return sprintf(buf, "%u\n", temp);
-}
-
-static ssize_t temp_label_show(struct device *dev,
-			       struct device_attribute *devattr, char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-
-	return sprintf(buf, "%s\n", attr->index ? "Tctl" : "Tdie");
-}
+const char *k10temp_temp_label[] = {
+	"Tdie",
+	"Tctl",
+};
 
-static ssize_t temp1_max_show(struct device *dev,
-			      struct device_attribute *attr, char *buf)
+static int k10temp_read_labels(struct device *dev,
+			       enum hwmon_sensor_types type,
+			       u32 attr, int channel, const char **str)
 {
-	return sprintf(buf, "%d\n", 70 * 1000);
+	*str = k10temp_temp_label[channel];
+	return 0;
 }
 
-static ssize_t temp_crit_show(struct device *dev,
-			      struct device_attribute *devattr, char *buf)
+static int k10temp_read(struct device *dev, enum hwmon_sensor_types type,
+			u32 attr, int channel, long *val)
 {
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
 	struct k10temp_data *data = dev_get_drvdata(dev);
-	int show_hyst = attr->index;
 	u32 regval;
-	int value;
 
-	data->read_htcreg(data->pdev, &regval);
-	value = ((regval >> 16) & 0x7f) * 500 + 52000;
-	if (show_hyst)
-		value -= ((regval >> 24) & 0xf) * 500;
-	return sprintf(buf, "%d\n", value);
+	switch (attr) {
+	case hwmon_temp_input:
+		switch (channel) {
+		case 0:		/* Tdie */
+			*val = get_raw_temp(data) - data->temp_offset;
+			if (*val < 0)
+				*val = 0;
+			break;
+		case 1:		/* Tctl */
+			*val = get_raw_temp(data);
+			if (*val < 0)
+				*val = 0;
+			break;
+		default:
+			return -EOPNOTSUPP;
+		}
+		break;
+	case hwmon_temp_max:
+		*val = 70 * 1000;
+		break;
+	case hwmon_temp_crit:
+		data->read_htcreg(data->pdev, &regval);
+		*val = ((regval >> 16) & 0x7f) * 500 + 52000;
+		break;
+	case hwmon_temp_crit_hyst:
+		data->read_htcreg(data->pdev, &regval);
+		*val = (((regval >> 16) & 0x7f)
+			- ((regval >> 24) & 0xf)) * 500 + 52000;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+	return 0;
 }
 
-static DEVICE_ATTR_RO(temp1_input);
-static DEVICE_ATTR_RO(temp1_max);
-static SENSOR_DEVICE_ATTR_RO(temp1_crit, temp_crit, 0);
-static SENSOR_DEVICE_ATTR_RO(temp1_crit_hyst, temp_crit, 1);
-
-static SENSOR_DEVICE_ATTR_RO(temp1_label, temp_label, 0);
-static DEVICE_ATTR_RO(temp2_input);
-static SENSOR_DEVICE_ATTR_RO(temp2_label, temp_label, 1);
-
-static umode_t k10temp_is_visible(struct kobject *kobj,
-				  struct attribute *attr, int index)
+static umode_t k10temp_is_visible(const void *_data,
+				  enum hwmon_sensor_types type,
+				  u32 attr, int channel)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
-	struct k10temp_data *data = dev_get_drvdata(dev);
+	const struct k10temp_data *data = _data;
 	struct pci_dev *pdev = data->pdev;
 	u32 reg;
 
-	switch (index) {
-	case 0 ... 1:	/* temp1_input, temp1_max */
-	default:
-		break;
-	case 2 ... 3:	/* temp1_crit, temp1_crit_hyst */
-		if (!data->read_htcreg)
-			return 0;
-
-		pci_read_config_dword(pdev, REG_NORTHBRIDGE_CAPABILITIES,
-				      &reg);
-		if (!(reg & NB_CAP_HTC))
-			return 0;
-
-		data->read_htcreg(data->pdev, &reg);
-		if (!(reg & HTC_ENABLE))
-			return 0;
-		break;
-	case 4 ... 6:	/* temp1_label, temp2_input, temp2_label */
-		if (!data->show_tdie)
+	switch (type) {
+	case hwmon_temp:
+		switch (attr) {
+		case hwmon_temp_input:
+			if (channel && !data->show_tdie)
+				return 0;
+			break;
+		case hwmon_temp_max:
+			if (channel)
+				return 0;
+			break;
+		case hwmon_temp_crit:
+		case hwmon_temp_crit_hyst:
+			if (channel || !data->read_htcreg)
+				return 0;
+
+			pci_read_config_dword(pdev,
+					      REG_NORTHBRIDGE_CAPABILITIES,
+					      &reg);
+			if (!(reg & NB_CAP_HTC))
+				return 0;
+
+			data->read_htcreg(data->pdev, &reg);
+			if (!(reg & HTC_ENABLE))
+				return 0;
+			break;
+		case hwmon_temp_label:
+			if (!data->show_tdie)
+				return 0;
+			break;
+		default:
 			return 0;
+		}
 		break;
+	default:
+		return 0;
 	}
-	return attr->mode;
+	return 0444;
 }
 
-static struct attribute *k10temp_attrs[] = {
-	&dev_attr_temp1_input.attr,
-	&dev_attr_temp1_max.attr,
-	&sensor_dev_attr_temp1_crit.dev_attr.attr,
-	&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
-	&sensor_dev_attr_temp1_label.dev_attr.attr,
-	&dev_attr_temp2_input.attr,
-	&sensor_dev_attr_temp2_label.dev_attr.attr,
-	NULL
-};
-
-static const struct attribute_group k10temp_group = {
-	.attrs = k10temp_attrs,
-	.is_visible = k10temp_is_visible,
-};
-__ATTRIBUTE_GROUPS(k10temp);
-
 static bool has_erratum_319(struct pci_dev *pdev)
 {
 	u32 pkg_type, reg_dram_cfg;
@@ -285,8 +276,27 @@ static bool has_erratum_319(struct pci_dev *pdev)
 	       (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_stepping <= 2);
 }
 
-static int k10temp_probe(struct pci_dev *pdev,
-				   const struct pci_device_id *id)
+static const struct hwmon_channel_info *k10temp_info[] = {
+	HWMON_CHANNEL_INFO(temp,
+			   HWMON_T_INPUT | HWMON_T_MAX |
+			   HWMON_T_CRIT | HWMON_T_CRIT_HYST |
+			   HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL),
+	NULL
+};
+
+static const struct hwmon_ops k10temp_hwmon_ops = {
+	.is_visible = k10temp_is_visible,
+	.read = k10temp_read,
+	.read_string = k10temp_read_labels,
+};
+
+static const struct hwmon_chip_info k10temp_chip_info = {
+	.ops = &k10temp_hwmon_ops,
+	.info = k10temp_info,
+};
+
+static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	int unreliable = has_erratum_319(pdev);
 	struct device *dev = &pdev->dev;
@@ -334,8 +344,9 @@ static int k10temp_probe(struct pci_dev *pdev,
 		}
 	}
 
-	hwmon_dev = devm_hwmon_device_register_with_groups(dev, "k10temp", data,
-							   k10temp_groups);
+	hwmon_dev = devm_hwmon_device_register_with_info(dev, "k10temp", data,
+							 &k10temp_chip_info,
+							 NULL);
 	return PTR_ERR_OR_ZERO(hwmon_dev);
 }
 
Signature · 1 line
2.17.1
author maintainer
#3 lore raw

PATCH v2 3/5 hwmon: (k10temp) Report temperatures per CPU die

In reply to Guenter Roeck

Zen2 reports reporting temperatures per CPU die (called Core Complex Dies, or CCD, by AMD). Add support for it to the k10temp driver.

---
v2: Added Tested-by: tags

 drivers/hwmon/k10temp.c | 79 ++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 78 insertions(+), 1 deletion(-)
drivers/hwmon/k10temp.c +78 -1
index c45f6498a59b..944ba8008bc4 100644
@@ -5,6 +5,12 @@
  *
  * Copyright (c) 2009 Clemens Ladisch <[email protected]>
  * Copyright (c) 2020 Guenter Roeck <[email protected]>
+ *
+ * Implementation notes:
+ * - CCD1 and CCD2 register address information as well as the calculation to
+ *   convert raw register values is from https://github.com/ocerman/zenpower.
+ *   The information is not confirmed from chip datasheets, but experiments
+ *   suggest that it provides reasonable temperature values.
  */
 
 #include <linux/bitops.h>
@@ -61,6 +67,8 @@ static DEFINE_MUTEX(nb_smu_ind_mutex);
 
 /* F17h M01h Access througn SMN */
 #define F17H_M01H_REPORTED_TEMP_CTRL_OFFSET	0x00059800
+#define F17H_M70H_CCD1_TEMP			0x00059954
+#define F17H_M70H_CCD2_TEMP			0x00059958
 
 #define CUR_TEMP_SHIFT				21
 #define CUR_TEMP_RANGE_SEL_MASK			BIT(19)
@@ -72,6 +80,8 @@ struct k10temp_data {
 	int temp_offset;
 	u32 temp_adjust_mask;
 	bool show_tdie;
+	bool show_tccd1;
+	bool show_tccd2;
 };
 
 struct tctl_offset {
@@ -143,6 +153,8 @@ static long get_raw_temp(struct k10temp_data *data)
 const char *k10temp_temp_label[] = {
 	"Tdie",
 	"Tctl",
+	"Tccd1",
+	"Tccd2",
 };
 
 static int k10temp_read_labels(struct device *dev,
@@ -172,6 +184,16 @@ static int k10temp_read(struct device *dev, enum hwmon_sensor_types type,
 			if (*val < 0)
 				*val = 0;
 			break;
+		case 2:		/* Tccd1 */
+			amd_smn_read(amd_pci_dev_to_node_id(data->pdev),
+				     F17H_M70H_CCD1_TEMP, &regval);
+			*val = (regval & 0xfff) * 125 - 305000;
+			break;
+		case 3:		/* Tccd2 */
+			amd_smn_read(amd_pci_dev_to_node_id(data->pdev),
+				     F17H_M70H_CCD2_TEMP, &regval);
+			*val = (regval & 0xfff) * 125 - 305000;
+			break;
 		default:
 			return -EOPNOTSUPP;
 		}
@@ -206,8 +228,24 @@ static umode_t k10temp_is_visible(const void *_data,
 	case hwmon_temp:
 		switch (attr) {
 		case hwmon_temp_input:
-			if (channel && !data->show_tdie)
+			switch (channel) {
+			case 0:		/* Tdie, or Tctl if we don't show it */
+				break;
+			case 1:		/* Tctl */
+				if (!data->show_tdie)
+					return 0;
+				break;
+			case 2:		/* Tccd1 */
+				if (!data->show_tccd1)
+					return 0;
+				break;
+			case 3:		/* Tccd2 */
+				if (!data->show_tccd2)
+					return 0;
+				break;
+			default:
 				return 0;
+			}
 			break;
 		case hwmon_temp_max:
 			if (channel)
@@ -229,8 +267,24 @@ static umode_t k10temp_is_visible(const void *_data,
 				return 0;
 			break;
 		case hwmon_temp_label:
+			/* No labels if we don't show the die temperature */
 			if (!data->show_tdie)
 				return 0;
+			switch (channel) {
+			case 0:		/* Tdie */
+			case 1:		/* Tctl */
+				break;
+			case 2:		/* Tccd1 */
+				if (!data->show_tccd1)
+					return 0;
+				break;
+			case 3:		/* Tccd2 */
+				if (!data->show_tccd2)
+					return 0;
+				break;
+			default:
+				return 0;
+			}
 			break;
 		default:
 			return 0;
@@ -281,6 +335,8 @@ static const struct hwmon_channel_info *k10temp_info[] = {
 			   HWMON_T_INPUT | HWMON_T_MAX |
 			   HWMON_T_CRIT | HWMON_T_CRIT_HYST |
 			   HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
+			   HWMON_T_INPUT | HWMON_T_LABEL,
 			   HWMON_T_INPUT | HWMON_T_LABEL),
 	NULL
 };
@@ -326,9 +382,30 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		data->read_htcreg = read_htcreg_nb_f15;
 		data->read_tempreg = read_tempreg_nb_f15;
 	} else if (boot_cpu_data.x86 == 0x17 || boot_cpu_data.x86 == 0x18) {
+		u32 regval;
+
 		data->temp_adjust_mask = CUR_TEMP_RANGE_SEL_MASK;
 		data->read_tempreg = read_tempreg_nb_f17;
 		data->show_tdie = true;
+
+		switch (boot_cpu_data.x86_model) {
+		case 0x1:	/* Zen */
+		case 0x8:	/* Zen+ */
+		case 0x11:	/* Zen APU */
+		case 0x18:	/* Zen+ APU */
+			break;
+		case 0x71:	/* Zen2 */
+			amd_smn_read(amd_pci_dev_to_node_id(pdev),
+				     F17H_M70H_CCD1_TEMP, &regval);
+			if (regval & 0xfff)
+				data->show_tccd1 = true;
+
+			amd_smn_read(amd_pci_dev_to_node_id(pdev),
+				     F17H_M70H_CCD2_TEMP, &regval);
+			if (regval & 0xfff)
+				data->show_tccd2 = true;
+			break;
+		}
 	} else {
 		data->read_htcreg = read_htcreg_pci;
 		data->read_tempreg = read_tempreg_pci;
Signature · 1 line
2.17.1
author maintainer
#4 lore raw

PATCH v2 4/5 hwmon: (k10temp) Show core and SoC current and voltages on Ryzen CPUs

In reply to Guenter Roeck

Ryzen CPUs report core and SoC voltages and currents. Add support for it to the k10temp driver.

For the time being, only report voltages and currents for Ryzen CPUs. Threadripper and EPYC appear to use a different mechanism.

---
v2: Added Tested-by: tags.
Don't try to report voltage and current information on Threadripper and EPYC CPUs.

 drivers/hwmon/k10temp.c | 126 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 123 insertions(+), 3 deletions(-)
drivers/hwmon/k10temp.c +123 -3
index 944ba8008bc4..a4313b662a3a 100644
@@ -11,6 +11,13 @@
  *   convert raw register values is from https://github.com/ocerman/zenpower.
  *   The information is not confirmed from chip datasheets, but experiments
  *   suggest that it provides reasonable temperature values.
+ * - Register addresses to read chip voltage and current is also from
+ *   https://github.com/ocerman/zenpower, and not confirmed from chip
+ *   datasheets. Experiments suggest that reported current and voltage
+ *   information is reasonable.
+ * - It is unknown if the mechanism to read CCD1/CCD2 temperature as well as
+ *   current and voltage information works on higher-end Ryzen CPUs, or if
+ *   additional information is available on those CPUs.
  */
 
 #include <linux/bitops.h>
@@ -70,6 +77,10 @@ static DEFINE_MUTEX(nb_smu_ind_mutex);
 #define F17H_M70H_CCD1_TEMP			0x00059954
 #define F17H_M70H_CCD2_TEMP			0x00059958
 
+#define F17H_M01H_SVI				0x0005A000
+#define F17H_M01H_SVI_TEL_PLANE0		(F17H_M01H_SVI + 0xc)
+#define F17H_M01H_SVI_TEL_PLANE1		(F17H_M01H_SVI + 0x10)
+
 #define CUR_TEMP_SHIFT				21
 #define CUR_TEMP_RANGE_SEL_MASK			BIT(19)
 
@@ -82,6 +93,9 @@ struct k10temp_data {
 	bool show_tdie;
 	bool show_tccd1;
 	bool show_tccd2;
+	u32 svi_addr[2];
+	bool show_current;
+	int cfactor[2];
 };
 
 struct tctl_offset {
@@ -99,6 +113,16 @@ static const struct tctl_offset tctl_offset_table[] = {
 	{ 0x17, "AMD Ryzen Threadripper 29", 27000 }, /* 29{20,50,70,90}[W]X */
 };
 
+static bool is_threadripper(void)
+{
+	return strstr(boot_cpu_data.x86_model_id, "Threadripper");
+}
+
+static bool is_epyc(void)
+{
+	return strstr(boot_cpu_data.x86_model_id, "EPYC");
+}
+
 static void read_htcreg_pci(struct pci_dev *pdev, u32 *regval)
 {
 	pci_read_config_dword(pdev, REG_HARDWARE_THERMAL_CONTROL, regval);
@@ -157,16 +181,76 @@ const char *k10temp_temp_label[] = {
 	"Tccd2",
 };
 
+const char *k10temp_in_label[] = {
+	"Vcore",
+	"Vsoc",
+};
+
+const char *k10temp_curr_label[] = {
+	"Icore",
+	"Isoc",
+};
+
 static int k10temp_read_labels(struct device *dev,
 			       enum hwmon_sensor_types type,
 			       u32 attr, int channel, const char **str)
 {
-	*str = k10temp_temp_label[channel];
+	switch (type) {
+	case hwmon_temp:
+		*str = k10temp_temp_label[channel];
+		break;
+	case hwmon_in:
+		*str = k10temp_in_label[channel];
+		break;
+	case hwmon_curr:
+		*str = k10temp_curr_label[channel];
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
 	return 0;
 }
 
-static int k10temp_read(struct device *dev, enum hwmon_sensor_types type,
-			u32 attr, int channel, long *val)
+static int k10temp_read_curr(struct device *dev, u32 attr, int channel,
+			     long *val)
+{
+	struct k10temp_data *data = dev_get_drvdata(dev);
+	u32 regval;
+
+	switch (attr) {
+	case hwmon_curr_input:
+		amd_smn_read(amd_pci_dev_to_node_id(data->pdev),
+			     data->svi_addr[channel], &regval);
+		*val = DIV_ROUND_CLOSEST(data->cfactor[channel] *
+					 (regval & 0xff),
+					 1000);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+	return 0;
+}
+
+static int k10temp_read_in(struct device *dev, u32 attr, int channel, long *val)
+{
+	struct k10temp_data *data = dev_get_drvdata(dev);
+	u32 regval;
+
+	switch (attr) {
+	case hwmon_in_input:
+		amd_smn_read(amd_pci_dev_to_node_id(data->pdev),
+			     data->svi_addr[channel], &regval);
+		regval = (regval >> 16) & 0xff;
+		*val = DIV_ROUND_CLOSEST(155000 - regval * 625, 100);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+	return 0;
+}
+
+static int k10temp_read_temp(struct device *dev, u32 attr, int channel,
+			     long *val)
 {
 	struct k10temp_data *data = dev_get_drvdata(dev);
 	u32 regval;
@@ -216,6 +300,21 @@ static int k10temp_read(struct device *dev, enum hwmon_sensor_types type,
 	return 0;
 }
 
+static int k10temp_read(struct device *dev, enum hwmon_sensor_types type,
+			u32 attr, int channel, long *val)
+{
+	switch (type) {
+	case hwmon_temp:
+		return k10temp_read_temp(dev, attr, channel, val);
+	case hwmon_in:
+		return k10temp_read_in(dev, attr, channel, val);
+	case hwmon_curr:
+		return k10temp_read_curr(dev, attr, channel, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static umode_t k10temp_is_visible(const void *_data,
 				  enum hwmon_sensor_types type,
 				  u32 attr, int channel)
@@ -290,6 +389,11 @@ static umode_t k10temp_is_visible(const void *_data,
 			return 0;
 		}
 		break;
+	case hwmon_in:
+	case hwmon_curr:
+		if (!data->show_current)
+			return 0;
+		break;
 	default:
 		return 0;
 	}
@@ -338,6 +442,12 @@ static const struct hwmon_channel_info *k10temp_info[] = {
 			   HWMON_T_INPUT | HWMON_T_LABEL,
 			   HWMON_T_INPUT | HWMON_T_LABEL,
 			   HWMON_T_INPUT | HWMON_T_LABEL),
+	HWMON_CHANNEL_INFO(in,
+			   HWMON_I_INPUT | HWMON_I_LABEL,
+			   HWMON_I_INPUT | HWMON_I_LABEL),
+	HWMON_CHANNEL_INFO(curr,
+			   HWMON_C_INPUT | HWMON_C_LABEL,
+			   HWMON_C_INPUT | HWMON_C_LABEL),
 	NULL
 };
 
@@ -393,8 +503,18 @@ static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		case 0x8:	/* Zen+ */
 		case 0x11:	/* Zen APU */
 		case 0x18:	/* Zen+ APU */
+			data->show_current = !is_threadripper() && !is_epyc();
+			data->svi_addr[0] = F17H_M01H_SVI_TEL_PLANE0;
+			data->svi_addr[1] = F17H_M01H_SVI_TEL_PLANE1;
+			data->cfactor[0] = 1039211;	/* core */
+			data->cfactor[1] = 360772;	/* SoC */
 			break;
 		case 0x71:	/* Zen2 */
+			data->show_current = !is_threadripper() && !is_epyc();
+			data->cfactor[0] = 658823;	/* core */
+			data->cfactor[1] = 294300;	/* SoC */
+			data->svi_addr[0] = F17H_M01H_SVI_TEL_PLANE1;
+			data->svi_addr[1] = F17H_M01H_SVI_TEL_PLANE0;
 			amd_smn_read(amd_pci_dev_to_node_id(pdev),
 				     F17H_M70H_CCD1_TEMP, &regval);
 			if (regval & 0xfff)
Signature · 1 line
2.17.1
author maintainer
#5 lore raw

PATCH v2 5/5 hwmon: (k10temp) Don't show temperature limits on Ryzen (Zen) CPUs

In reply to Guenter Roeck

The maximum Tdie or Tctl is not published for Ryzen CPUs. What is known, however, is that the traditional value of 70 degrees C is no longer correct. Displaying it is meaningless, confusing, and wrong. Stop doing it.

---
v2: Added patch.

 drivers/hwmon/k10temp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/hwmon/k10temp.c +1 -1
index a4313b662a3a..cdfebe435003 100644
@@ -347,7 +347,7 @@ static umode_t k10temp_is_visible(const void *_data,
 			}
 			break;
 		case hwmon_temp_max:
-			if (channel)
+			if (channel || data->show_tdie)
 				return 0;
 			break;
 		case hwmon_temp_crit:
Signature · 1 line
2.17.1
#6 lore raw
In reply to Guenter Roeck
Quoted 38 lines · Guenter Roeck

This patch series implements various improvements for the k10temp driver.

Patch 1/5 introduces the use of bit operations.

Patch 2/5 converts the driver to use the devm_hwmon_device_register_with_info API. This not only simplifies the code and reduces its size, it also makes the code easier to maintain and enhance.

Patch 3/5 adds support for reporting Core Complex Die (CCD) temperatures on Ryzen 3 (Zen2) CPUs.

Patch 4/5 adds support for reporting core and SoC current and voltage information on Ryzen CPUs.

Patch 5/5 removes the maximum temperature from Tdie for Ryzen CPUs. It is inaccurate, misleading, and it just doesn't make sense to report wrong information.

With all patches in place, output on Ryzen 3900X CPUs looks as follows (with the system under load).

k10temp-pci-00c3

Adapter: PCI adapter
Vcore:        +1.36 V
Vsoc:         +1.18 V
Tdie:         +86.8°C
Tctl:         +86.8°C
Tccd1:        +80.0°C
Tccd2:        +81.8°C
Icore:       +44.14 A
Isoc:        +13.83 A

The voltage and current information is limited to Ryzen CPUs. Voltage and current reporting on Threadripper and EPYC CPUs is different, and the reported information is either incomplete or wrong. Exclude it for the time being; it can always be added if/when more information becomes available.

Quoted 4 lines

Tested with the following Ryzen CPUs:
1300X A user with this CPU in the system reported somewhat unexpected
values for Vcore; it isn't entirely if at all clear why that is the case. Overall this does not warrant holding up the series.

As the owner of that machine, very much agreed.

Quoted 8 lines
    1600
    1800X
    2200G
    2400G
    3800X
    3900X
    3950X

I also had sensible results for v1 on 2500U and 3400G

Quoted 4 lines

v2: Added tested-by: tags as received.
Don't display voltage and current information for Threadripper and EPYC. Stop displaying the fixed (and wrong) maximum temperature of 70 degrees C for Tdie on model 17h/18h CPUs.

For v2 on my 2500U, system idle and then under load -

k10temp-load 2020-01-19 00:22:05.595470877 +0000 renamed from k10temp-idle 2020-01-19 00:16:18.812002121 +0000 +6 -6
@@ -1,15 +1,15 @@
 k10temp-pci-00c3
 Adapter: PCI adapter
-Vcore:        +0.98 V
+Vcore:        +1.15 V
 Vsoc:         +0.93 V
-Tdie:         +38.2°C
-Tctl:         +38.2°C
-Icore:       +10.39 A
-Isoc:         +6.49 A
+Tdie:         +76.2°C
+Tctl:         +76.2°C
+Icore:       +51.96 A
+Isoc:         +7.58 A
 
 amdgpu-pci-0300
 Adapter: PCI adapter
 vddgfx:           N/A
 vddnb:            N/A
-edge:         +38.0°C  (crit = +80.0°C, hyst =  +0.0°C)
+edge:         +76.0°C  (crit = +80.0°C, hyst =  +0.0°C)
 

I'll ony test v2 on the 3400G if you think the results would add something.

ĸen

Signature · 3 lines
If a man stands before a mirror and sees in it his reflection, what
he sees is not a true reproduction, but a picture of himself when he
was a younger man.        -- de Selby
author maintainer
#7 lore raw
Quoted 54 lines · Ken Moffat
Quoted 38 lines · Guenter Roeck

This patch series implements various improvements for the k10temp driver.

Patch 1/5 introduces the use of bit operations.

Patch 2/5 converts the driver to use the devm_hwmon_device_register_with_info API. This not only simplifies the code and reduces its size, it also makes the code easier to maintain and enhance.

Patch 3/5 adds support for reporting Core Complex Die (CCD) temperatures on Ryzen 3 (Zen2) CPUs.

Patch 4/5 adds support for reporting core and SoC current and voltage information on Ryzen CPUs.

Patch 5/5 removes the maximum temperature from Tdie for Ryzen CPUs. It is inaccurate, misleading, and it just doesn't make sense to report wrong information.

With all patches in place, output on Ryzen 3900X CPUs looks as follows (with the system under load).

k10temp-pci-00c3

Adapter: PCI adapter
Vcore:        +1.36 V
Vsoc:         +1.18 V
Tdie:         +86.8°C
Tctl:         +86.8°C
Tccd1:        +80.0°C
Tccd2:        +81.8°C
Icore:       +44.14 A
Isoc:        +13.83 A

The voltage and current information is limited to Ryzen CPUs. Voltage and current reporting on Threadripper and EPYC CPUs is different, and the reported information is either incomplete or wrong. Exclude it for the time being; it can always be added if/when more information becomes available.

Quoted 4 lines

Tested with the following Ryzen CPUs:
1300X A user with this CPU in the system reported somewhat unexpected
values for Vcore; it isn't entirely if at all clear why that is the case. Overall this does not warrant holding up the series.

As the owner of that machine, very much agreed.

Quoted 8 lines
Quoted 1 line
     1600
     1800X
     2200G
     2400G
     3800X
     3900X
     3950X
Quoted 2 lines

I also had sensible results for v1 on 2500U and 3400G

Sorry, I somehow missed that.

Quoted 31 lines
Quoted 4 lines

v2: Added tested-by: tags as received.
Don't display voltage and current information for Threadripper and EPYC. Stop displaying the fixed (and wrong) maximum temperature of 70 degrees C for Tdie on model 17h/18h CPUs.

For v2 on my 2500U, system idle and then under load -

k10temp-load 2020-01-19 00:22:05.595470877 +0000 renamed from k10temp-idle 2020-01-19 00:16:18.812002121 +0000 +6 -6
@@ -1,15 +1,15 @@
  k10temp-pci-00c3
  Adapter: PCI adapter
-Vcore:        +0.98 V
+Vcore:        +1.15 V
  Vsoc:         +0.93 V
-Tdie:         +38.2°C
-Tctl:         +38.2°C
-Icore:       +10.39 A
-Isoc:         +6.49 A
+Tdie:         +76.2°C
+Tctl:         +76.2°C
+Icore:       +51.96 A
+Isoc:         +7.58 A
 
  amdgpu-pci-0300
  Adapter: PCI adapter
  vddgfx:           N/A
  vddnb:            N/A
-edge:         +38.0°C  (crit = +80.0°C, hyst =  +0.0°C)
+edge:         +76.0°C  (crit = +80.0°C, hyst =  +0.0°C)
 
Quoted 2 lines

I'll ony test v2 on the 3400G if you think the results would add something.

Thanks a lot for the additional testing! I don't think we need another test on 3400G; after all, the actual measurement code didn't change.

Everyone: I'll be happy to add Tested-by: tags with your name and e-mail address to the series, but you'll have to send it to me. I appreciate all your testing and would like to acknowledge it, but I can not add
Tested-by: tags (or any other tags, for that matter) on my own.

Thanks,
Guenter

#8 lore raw
Quoted 97 lines · Guenter Roeck
Quoted 54 lines · Ken Moffat
Quoted 38 lines · Guenter Roeck

This patch series implements various improvements for the k10temp driver.

Patch 1/5 introduces the use of bit operations.

Patch 2/5 converts the driver to use the devm_hwmon_device_register_with_info API. This not only simplifies the code and reduces its size, it also makes the code easier to maintain and enhance.

Patch 3/5 adds support for reporting Core Complex Die (CCD) temperatures on Ryzen 3 (Zen2) CPUs.

Patch 4/5 adds support for reporting core and SoC current and voltage information on Ryzen CPUs.

Patch 5/5 removes the maximum temperature from Tdie for Ryzen CPUs. It is inaccurate, misleading, and it just doesn't make sense to report wrong information.

With all patches in place, output on Ryzen 3900X CPUs looks as follows (with the system under load).

k10temp-pci-00c3

Adapter: PCI adapter
Vcore:        +1.36 V
Vsoc:         +1.18 V
Tdie:         +86.8°C
Tctl:         +86.8°C
Tccd1:        +80.0°C
Tccd2:        +81.8°C
Icore:       +44.14 A
Isoc:        +13.83 A

The voltage and current information is limited to Ryzen CPUs. Voltage and current reporting on Threadripper and EPYC CPUs is different, and the reported information is either incomplete or wrong. Exclude it for the time being; it can always be added if/when more information becomes available.

Quoted 4 lines

Tested with the following Ryzen CPUs:
1300X A user with this CPU in the system reported somewhat unexpected
values for Vcore; it isn't entirely if at all clear why that is the case. Overall this does not warrant holding up the series.

As the owner of that machine, very much agreed.

Quoted 8 lines
Quoted 1 line
     1600
     1800X
     2200G
     2400G
     3800X
     3900X
     3950X
Quoted 2 lines

I also had sensible results for v1 on 2500U and 3400G

Sorry, I somehow missed that.

Quoted 31 lines
Quoted 4 lines

v2: Added tested-by: tags as received.
Don't display voltage and current information for Threadripper and EPYC. Stop displaying the fixed (and wrong) maximum temperature of 70 degrees C for Tdie on model 17h/18h CPUs.

For v2 on my 2500U, system idle and then under load -

k10temp-load 2020-01-19 00:22:05.595470877 +0000 renamed from k10temp-idle 2020-01-19 00:16:18.812002121 +0000 +6 -6
@@ -1,15 +1,15 @@
  k10temp-pci-00c3
  Adapter: PCI adapter
-Vcore:        +0.98 V
+Vcore:        +1.15 V
  Vsoc:         +0.93 V
-Tdie:         +38.2°C
-Tctl:         +38.2°C
-Icore:       +10.39 A
-Isoc:         +6.49 A
+Tdie:         +76.2°C
+Tctl:         +76.2°C
+Icore:       +51.96 A
+Isoc:         +7.58 A
 
  amdgpu-pci-0300
  Adapter: PCI adapter
  vddgfx:           N/A
  vddnb:            N/A
-edge:         +38.0°C  (crit = +80.0°C, hyst =  +0.0°C)
+edge:         +76.0°C  (crit = +80.0°C, hyst =  +0.0°C)
 
Quoted 2 lines

I'll ony test v2 on the 3400G if you think the results would add something.

Thanks a lot for the additional testing! I don't think we need another test on 3400G; after all, the actual measurement code didn't change.

Quoted 7 lines

Everyone: I'll be happy to add Tested-by: tags with your name and e-mail address to the series, but you'll have to send it to me. I appreciate all your testing and would like to acknowledge it, but I can not add
Tested-by: tags (or any other tags, for that matter) on my own.

Thanks,
Guenter

For the little it is worth:
Tested-by Ken Moffat <[email protected]>

Tested-by
#9 lore raw
In reply to Guenter Roeck
Quoted 8 lines · Guenter Roeck

Everyone: I'll be happy to add Tested-by: tags with your name and e-mail address to the series, but you'll have to send it to me. I appreciate all your testing and would like to acknowledge it, but I can not add
Tested-by: tags (or any other tags, for that matter) on my own.

Thanks,
Guenter

Tested-by on the v2 series
#10 lore raw
In reply to Guenter Roeck
Quoted 1 line · In article <[email protected]>…

This patch series implements various improvements for the k10temp driver.

...

Quoted 6 lines

The voltage and current information is limited to Ryzen CPUs. Voltage and current reporting on Threadripper and EPYC CPUs is different, and the reported information is either incomplete or wrong. Exclude it for the time being; it can always be added if/when more information becomes available.

Tested with the following Ryzen CPUs:

Tested on a Ryzen 7 2700 (patched on top of 5.4.13):

| k10temp-pci-00c3
| Adapter: PCI adapter
| Vcore:        +0.80 V
| Vsoc:         +0.81 V
| Tdie:         +37.0°C
| Tctl:         +37.0°C
| Icore:        +8.31 A
| Isoc:         +6.86 A

Like the 1300X case I see a discrepancy compared to what the nct6779 driver says Vcore is:

| nct6779-isa-0290
| Adapter: ISA adapter
| Vcore:                  +0.33 V  (min =  +0.00 V, max =  +1.74 V)
| in1:                    +0.32 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| AVCC:                   +3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| +3.3V:                  +3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| in4:                    +1.88 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| in5:                    +0.82 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| in6:                    +0.30 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| 3VSB:                   +3.42 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| Vbat:                   +3.25 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| in9:                    +0.00 V  (min =  +0.00 V, max =  +0.00 V)
| in10:                   +0.22 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| in11:                   +1.06 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| in12:                   +1.70 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| in13:                   +1.04 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| in14:                   +1.79 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| fan1:                     0 RPM  (min =    0 RPM)
| fan2:                  1708 RPM  (min =    0 RPM)
| fan3:                     0 RPM  (min =    0 RPM)
| fan4:                     0 RPM  (min =    0 RPM)
| fan5:                     0 RPM  (min =    0 RPM)
| SYSTIN:                 +33.0°C  (high =  +0.0°C, hyst =  +0.0°C)  ALARM
| sensor = thermistor
| CPUTIN:                 -62.5°C  (high = +80.0°C, hyst = +75.0°C)
| sensor = thermistor
| AUXTIN0:                +79.0°C    sensor = thermistor
| AUXTIN1:                +96.0°C    sensor = thermistor
| AUXTIN2:                +23.0°C    sensor = thermistor
| AUXTIN3:                -22.0°C    sensor = thermistor
| SMBUSMASTER 0:          +39.0°C
| PCH_CHIP_CPU_MAX_TEMP:   +0.0°C
| PCH_CHIP_TEMP:           +0.0°C
| PCH_CPU_TEMP:            +0.0°C
| intrusion0:            ALARM
| intrusion1:            ALARM
| beep_enable:           disabled

I suspect the nct6779 is not reporting correctly (or needs some configuration) here, as I see that's what Ken is using with his 1300X as well.

(ASRock B450M Pro4 motherboard, fwiw.)

J.

Signature · 2 lines
Verily go thee not unto the internet for they will tell you both yea
and nay
author maintainer
#11 lore raw
Quoted 4 lines · Jonathan McDowell
Quoted 1 line · In article <[email protected]>…

This patch series implements various improvements for the k10temp driver.

...

Quoted 9 lines
Quoted 6 lines

The voltage and current information is limited to Ryzen CPUs. Voltage and current reporting on Threadripper and EPYC CPUs is different, and the reported information is either incomplete or wrong. Exclude it for the time being; it can always be added if/when more information becomes available.

Tested with the following Ryzen CPUs:

Thanks!

Quoted 11 lines

Tested on a Ryzen 7 2700 (patched on top of 5.4.13):

| k10temp-pci-00c3
| Adapter: PCI adapter
| Vcore:        +0.80 V
| Vsoc:         +0.81 V
| Tdie:         +37.0°C
| Tctl:         +37.0°C
| Icore:        +8.31 A
| Isoc:         +6.86 A
Quoted 6 lines

Like the 1300X case I see a discrepancy compared to what the nct6779 driver says Vcore is:

| nct6779-isa-0290
| Adapter: ISA adapter
| Vcore:                  +0.33 V  (min =  +0.00 V, max =  +1.74 V)

I see that on all of my boards as well (3900X, different boards and board vendors), with temperatures reported by the Super-IO chip sometimes as low as 0.18V (!). Yet, there is a clear correlation of that voltage with CPU load.
I suspect the measurement by the Super-IO chip is a different voltage.

I don't think there is anything we can do about that without access to more information.

Quoted 35 lines
| in1:                    +0.32 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| AVCC:                   +3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| +3.3V:                  +3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| in4:                    +1.88 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| in5:                    +0.82 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| in6:                    +0.30 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| 3VSB:                   +3.42 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| Vbat:                   +3.25 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| in9:                    +0.00 V  (min =  +0.00 V, max =  +0.00 V)
| in10:                   +0.22 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| in11:                   +1.06 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| in12:                   +1.70 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| in13:                   +1.04 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| in14:                   +1.79 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
| fan1:                     0 RPM  (min =    0 RPM)
| fan2:                  1708 RPM  (min =    0 RPM)
| fan3:                     0 RPM  (min =    0 RPM)
| fan4:                     0 RPM  (min =    0 RPM)
| fan5:                     0 RPM  (min =    0 RPM)
| SYSTIN:                 +33.0°C  (high =  +0.0°C, hyst =  +0.0°C)  ALARM
| sensor = thermistor
| CPUTIN:                 -62.5°C  (high = +80.0°C, hyst = +75.0°C)
| sensor = thermistor
| AUXTIN0:                +79.0°C    sensor = thermistor
| AUXTIN1:                +96.0°C    sensor = thermistor
| AUXTIN2:                +23.0°C    sensor = thermistor
| AUXTIN3:                -22.0°C    sensor = thermistor
| SMBUSMASTER 0:          +39.0°C
| PCH_CHIP_CPU_MAX_TEMP:   +0.0°C
| PCH_CHIP_TEMP:           +0.0°C
| PCH_CPU_TEMP:            +0.0°C
| intrusion0:            ALARM
| intrusion1:            ALARM
| beep_enable:           disabled
Quoted 4 lines

I suspect the nct6779 is not reporting correctly (or needs some configuration) here, as I see that's what Ken is using with his 1300X as well.

Initially I thought the voltage reported by the Super-IO chip would help us understand what is going on, but that is not really the case.

The problem with Ken's board is that idle current and voltage are very high. The idle voltage claims to be higher than the voltage under load, which doesn't really make sense. This is only reflected in the voltage and current reported by the CPU, but not by the voltage reported by the Super-IO chip.

Thanks,
Guenter

#12 lore raw
Quoted 41 lines · Guenter Roeck
Quoted 4 lines · Jonathan McDowell
Quoted 1 line · In article <[email protected]>…

This patch series implements various improvements for the k10temp driver.

...

Quoted 9 lines
Quoted 6 lines

The voltage and current information is limited to Ryzen CPUs. Voltage and current reporting on Threadripper and EPYC CPUs is different, and the reported information is either incomplete or wrong. Exclude it for the time being; it can always be added if/when more information becomes available.

Tested with the following Ryzen CPUs:

Thanks!

Quoted 11 lines

Tested on a Ryzen 7 2700 (patched on top of 5.4.13):

| k10temp-pci-00c3
| Adapter: PCI adapter
| Vcore:        +0.80 V
| Vsoc:         +0.81 V
| Tdie:         +37.0°C
| Tctl:         +37.0°C
| Icore:        +8.31 A
| Isoc:         +6.86 A
Quoted 6 lines

Like the 1300X case I see a discrepancy compared to what the nct6779 driver says Vcore is:

| nct6779-isa-0290
| Adapter: ISA adapter
| Vcore:                  +0.33 V  (min =  +0.00 V, max =  +1.74 V)

I see that on all of my boards as well (3900X, different boards and board vendors), with temperatures reported by the Super-IO chip sometimes as low as 0.18V (!). Yet, there is a clear correlation of that voltage with CPU load.
I suspect the measurement by the Super-IO chip is a different voltage.

I don't think there is anything we can do about that without access to more information.

...

Quoted 4 lines

The problem with Ken's board is that idle current and voltage are very high. The idle voltage claims to be higher than the voltage under load, which doesn't really make sense. This is only reflected in the voltage and current reported by the CPU, but not by the voltage reported by the Super-IO chip.

I see clear correlation between load/Vcore/Icore/Tdie from your patched k10temp driver which leads me to believe these numbers are valid for the 2700. Vsoc is fairly consistent and Isoc doesn't vary much either (6.3-8.1A range over the past 8 hours).

J.

Signature · 2 lines
... "f u cn rd ths, u cn gt a gd jb n cmptr prgrmmng." -- Simon Cozens,
    ox.os.linux
#13 lore raw
In reply to Guenter Roeck
Quoted 49 lines · Guenter Roeck

This patch series implements various improvements for the k10temp driver.

Patch 1/5 introduces the use of bit operations.

Patch 2/5 converts the driver to use the devm_hwmon_device_register_with_info API. This not only simplifies the code and reduces its size, it also makes the code easier to maintain and enhance.

Patch 3/5 adds support for reporting Core Complex Die (CCD) temperatures on Ryzen 3 (Zen2) CPUs.

Patch 4/5 adds support for reporting core and SoC current and voltage information on Ryzen CPUs.

Patch 5/5 removes the maximum temperature from Tdie for Ryzen CPUs. It is inaccurate, misleading, and it just doesn't make sense to report wrong information.

With all patches in place, output on Ryzen 3900X CPUs looks as follows (with the system under load).

k10temp-pci-00c3

Adapter: PCI adapter
Vcore:        +1.36 V
Vsoc:         +1.18 V
Tdie:         +86.8°C
Tctl:         +86.8°C
Tccd1:        +80.0°C
Tccd2:        +81.8°C
Icore:       +44.14 A
Isoc:        +13.83 A

The voltage and current information is limited to Ryzen CPUs. Voltage and current reporting on Threadripper and EPYC CPUs is different, and the reported information is either incomplete or wrong. Exclude it for the time being; it can always be added if/when more information becomes available.

Tested with the following Ryzen CPUs:

    1300X A user with this CPU in the system reported somewhat unexpected
          values for Vcore; it isn't entirely if at all clear why that is
          the case. Overall this does not warrant holding up the series.
    1600
    1800X
    2200G
    2400G
    3800X
    3900X
    3950X
Quoted 5 lines

v2: Added tested-by: tags as received.
Don't display voltage and current information for Threadripper and EPYC. Stop displaying the fixed (and wrong) maximum temperature of 70 degrees C for Tdie on model 17h/18h CPUs.

Just tested this on a 2400G. Here idle values:

k10temp-pci-00c3
Adapter: PCI adapter

   Vcore:        +0.77 V
   Vsoc:         +1.11 V
   Tdie:         +45.0°C
   Tctl:         +45.0°C

Icore: +10.39 A
Isoc: +2.89 A

nvme-pci-0100
Adapter: PCI adapter
Composite: +43.9°C (low = -273.1°C, high = +80.8°C)

                          (crit = +80.8°C)
   Sensor 1:     +43.9°C  (low  = -273.1°C, high = +65261.8°C)
   Sensor 2:     +48.9°C  (low  = -273.1°C, high = +65261.8°C)

nct6793-isa-0290
Adapter: ISA adapter

   in0:                    +0.35 V  (min =  +0.00 V, max =  +1.74 V)
   in1:                    +1.85 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in2:                    +3.41 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in3:                    +3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in4:                    +0.26 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in5:                    +0.14 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in6:                    +0.66 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in7:                    +3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in8:                    +3.26 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in9:                    +1.83 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in10:                   +0.19 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in11:                   +0.14 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in12:                   +1.84 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in13:                   +1.72 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in14:                   +0.21 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   fan1:                     0 RPM  (min =    0 RPM)
   fan2:                   323 RPM  (min =    0 RPM)
   fan3:                     0 RPM  (min =    0 RPM)
   fan4:                     0 RPM  (min =    0 RPM)
   fan5:                     0 RPM  (min =    0 RPM)
   SYSTIN:                +112.0°C  (high =  +0.0°C, hyst =  +0.0°C)  sensor = thermistor
   CPUTIN:                 +60.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
   AUXTIN0:                +46.0°C  (high =  +0.0°C, hyst =  +0.0°C)  ALARM  sensor = thermistor
   AUXTIN1:               +106.0°C    sensor = thermistor
   AUXTIN2:               +105.0°C    sensor = thermistor
   AUXTIN3:               +102.0°C    sensor = thermistor
   SMBUSMASTER 0:          +45.0°C
   PCH_CHIP_CPU_MAX_TEMP:   +0.0°C
   PCH_CHIP_TEMP:           +0.0°C
   PCH_CPU_TEMP:            +0.0°C
   intrusion0:            OK
   intrusion1:            ALARM
   beep_enable:           disabled

amdgpu-pci-0300
Adapter: PCI adapter
vddgfx: N/A
vddnb: N/A
edge: +45.0°C (crit = +80.0°C, hyst = +0.0°C)

And here with some high load:

k10temp-pci-00c3
Adapter: PCI adapter

   Vcore:        +1.32 V
   Vsoc:         +1.11 V
   Tdie:         +77.1°C
   Tctl:         +77.1°C

Icore: +85.22 A
Isoc: +3.61 A

nvme-pci-0100
Adapter: PCI adapter
Composite: +42.9°C (low = -273.1°C, high = +80.8°C)

                          (crit = +80.8°C)
   Sensor 1:     +42.9°C  (low  = -273.1°C, high = +65261.8°C)
   Sensor 2:     +45.9°C  (low  = -273.1°C, high = +65261.8°C)

nct6793-isa-0290
Adapter: ISA adapter

   in0:                    +0.68 V  (min =  +0.00 V, max =  +1.74 V)
   in1:                    +1.84 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in2:                    +3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in3:                    +3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in4:                    +0.26 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in5:                    +0.14 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in6:                    +0.66 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in7:                    +3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in8:                    +3.26 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in9:                    +1.83 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in10:                   +0.19 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in11:                   +0.14 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in12:                   +1.84 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in13:                   +1.72 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   in14:                   +0.20 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
   fan1:                     0 RPM  (min =    0 RPM)
   fan2:                  1931 RPM  (min =    0 RPM)
   fan3:                     0 RPM  (min =    0 RPM)
   fan4:                     0 RPM  (min =    0 RPM)
   fan5:                     0 RPM  (min =    0 RPM)
   SYSTIN:                +113.0°C  (high =  +0.0°C, hyst =  +0.0°C)  sensor = thermistor
   CPUTIN:                 +64.5°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
   AUXTIN0:                +45.0°C  (high =  +0.0°C, hyst =  +0.0°C)  ALARM  sensor = thermistor
   AUXTIN1:               +107.0°C    sensor = thermistor
   AUXTIN2:               +105.0°C    sensor = thermistor
   AUXTIN3:               +102.0°C    sensor = thermistor
   SMBUSMASTER 0:          +77.0°C
   PCH_CHIP_CPU_MAX_TEMP:   +0.0°C
   PCH_CHIP_TEMP:           +0.0°C
   PCH_CPU_TEMP:            +0.0°C
   intrusion0:            OK
   intrusion1:            ALARM
   beep_enable:           disabled

amdgpu-pci-0300
Adapter: PCI adapter
vddgfx: N/A
vddnb: N/A
edge: +77.0°C (crit = +80.0°C, hyst = +0.0°C)

Have also tried this on a EPYC 7302. Before the patch:

k10temp-pci-00c3
Adapter: PCI adapter
Tdie: +28.1°C (high = +70.0°C)
Tctl: +28.1°C

and after:

k10temp-pci-00c3
Adapter: PCI adapter
Tdie: +28.2°C
Tctl: +28.2°C

No extra values shown, but I think this is expected.

Tested-by Holger Kiehl <[email protected]>

Holger

author maintainer
#14 lore raw
Quoted 183 lines · Holger Kiehl
Quoted 49 lines · Guenter Roeck

This patch series implements various improvements for the k10temp driver.

Patch 1/5 introduces the use of bit operations.

Patch 2/5 converts the driver to use the devm_hwmon_device_register_with_info API. This not only simplifies the code and reduces its size, it also makes the code easier to maintain and enhance.

Patch 3/5 adds support for reporting Core Complex Die (CCD) temperatures on Ryzen 3 (Zen2) CPUs.

Patch 4/5 adds support for reporting core and SoC current and voltage information on Ryzen CPUs.

Patch 5/5 removes the maximum temperature from Tdie for Ryzen CPUs. It is inaccurate, misleading, and it just doesn't make sense to report wrong information.

With all patches in place, output on Ryzen 3900X CPUs looks as follows (with the system under load).

k10temp-pci-00c3

Adapter: PCI adapter
Vcore:        +1.36 V
Vsoc:         +1.18 V
Tdie:         +86.8°C
Tctl:         +86.8°C
Tccd1:        +80.0°C
Tccd2:        +81.8°C
Icore:       +44.14 A
Isoc:        +13.83 A

The voltage and current information is limited to Ryzen CPUs. Voltage and current reporting on Threadripper and EPYC CPUs is different, and the reported information is either incomplete or wrong. Exclude it for the time being; it can always be added if/when more information becomes available.

Tested with the following Ryzen CPUs:

     1300X A user with this CPU in the system reported somewhat unexpected
           values for Vcore; it isn't entirely if at all clear why that is
           the case. Overall this does not warrant holding up the series.
     1600
     1800X
     2200G
     2400G
     3800X
     3900X
     3950X
Quoted 5 lines

v2: Added tested-by: tags as received.
Don't display voltage and current information for Threadripper and EPYC. Stop displaying the fixed (and wrong) maximum temperature of 70 degrees C for Tdie on model 17h/18h CPUs.

Just tested this on a 2400G. Here idle values:

    k10temp-pci-00c3
    Adapter: PCI adapter
    Vcore:        +0.77 V
    Vsoc:         +1.11 V
    Tdie:         +45.0°C
    Tctl:         +45.0°C
    Icore:       +10.39 A
    Isoc:         +2.89 A

    nvme-pci-0100
    Adapter: PCI adapter
    Composite:    +43.9°C  (low  = -273.1°C, high = +80.8°C)
                           (crit = +80.8°C)
    Sensor 1:     +43.9°C  (low  = -273.1°C, high = +65261.8°C)
    Sensor 2:     +48.9°C  (low  = -273.1°C, high = +65261.8°C)

    nct6793-isa-0290
    Adapter: ISA adapter
    in0:                    +0.35 V  (min =  +0.00 V, max =  +1.74 V)
    in1:                    +1.85 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in2:                    +3.41 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in3:                    +3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in4:                    +0.26 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in5:                    +0.14 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in6:                    +0.66 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in7:                    +3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in8:                    +3.26 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in9:                    +1.83 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in10:                   +0.19 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in11:                   +0.14 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in12:                   +1.84 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in13:                   +1.72 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in14:                   +0.21 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    fan1:                     0 RPM  (min =    0 RPM)
    fan2:                   323 RPM  (min =    0 RPM)
    fan3:                     0 RPM  (min =    0 RPM)
    fan4:                     0 RPM  (min =    0 RPM)
    fan5:                     0 RPM  (min =    0 RPM)
    SYSTIN:                +112.0°C  (high =  +0.0°C, hyst =  +0.0°C)  sensor = thermistor
    CPUTIN:                 +60.0°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
    AUXTIN0:                +46.0°C  (high =  +0.0°C, hyst =  +0.0°C)  ALARM  sensor = thermistor
    AUXTIN1:               +106.0°C    sensor = thermistor
    AUXTIN2:               +105.0°C    sensor = thermistor
    AUXTIN3:               +102.0°C    sensor = thermistor
    SMBUSMASTER 0:          +45.0°C
    PCH_CHIP_CPU_MAX_TEMP:   +0.0°C
    PCH_CHIP_TEMP:           +0.0°C
    PCH_CPU_TEMP:            +0.0°C
    intrusion0:            OK
    intrusion1:            ALARM
    beep_enable:           disabled

    amdgpu-pci-0300
    Adapter: PCI adapter
    vddgfx:           N/A
    vddnb:            N/A
    edge:         +45.0°C  (crit = +80.0°C, hyst =  +0.0°C)

And here with some high load:

    k10temp-pci-00c3
    Adapter: PCI adapter
    Vcore:        +1.32 V
    Vsoc:         +1.11 V
    Tdie:         +77.1°C
    Tctl:         +77.1°C
    Icore:       +85.22 A
    Isoc:         +3.61 A

    nvme-pci-0100
    Adapter: PCI adapter
    Composite:    +42.9°C  (low  = -273.1°C, high = +80.8°C)
                           (crit = +80.8°C)
    Sensor 1:     +42.9°C  (low  = -273.1°C, high = +65261.8°C)
    Sensor 2:     +45.9°C  (low  = -273.1°C, high = +65261.8°C)

    nct6793-isa-0290
    Adapter: ISA adapter
    in0:                    +0.68 V  (min =  +0.00 V, max =  +1.74 V)
    in1:                    +1.84 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in2:                    +3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in3:                    +3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in4:                    +0.26 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in5:                    +0.14 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in6:                    +0.66 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in7:                    +3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in8:                    +3.26 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in9:                    +1.83 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in10:                   +0.19 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in11:                   +0.14 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in12:                   +1.84 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in13:                   +1.72 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    in14:                   +0.20 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
    fan1:                     0 RPM  (min =    0 RPM)
    fan2:                  1931 RPM  (min =    0 RPM)
    fan3:                     0 RPM  (min =    0 RPM)
    fan4:                     0 RPM  (min =    0 RPM)
    fan5:                     0 RPM  (min =    0 RPM)
    SYSTIN:                +113.0°C  (high =  +0.0°C, hyst =  +0.0°C)  sensor = thermistor
    CPUTIN:                 +64.5°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
    AUXTIN0:                +45.0°C  (high =  +0.0°C, hyst =  +0.0°C)  ALARM  sensor = thermistor
    AUXTIN1:               +107.0°C    sensor = thermistor
    AUXTIN2:               +105.0°C    sensor = thermistor
    AUXTIN3:               +102.0°C    sensor = thermistor
    SMBUSMASTER 0:          +77.0°C
    PCH_CHIP_CPU_MAX_TEMP:   +0.0°C
    PCH_CHIP_TEMP:           +0.0°C
    PCH_CPU_TEMP:            +0.0°C
    intrusion0:            OK
    intrusion1:            ALARM
    beep_enable:           disabled

    amdgpu-pci-0300
    Adapter: PCI adapter
    vddgfx:           N/A
    vddnb:            N/A
    edge:         +77.0°C  (crit = +80.0°C, hyst =  +0.0°C)

Have also tried this on a EPYC 7302. Before the patch:

    k10temp-pci-00c3
    Adapter: PCI adapter
    Tdie:         +28.1°C  (high = +70.0°C)
    Tctl:         +28.1°C
Quoted 9 lines

and after:

    k10temp-pci-00c3
    Adapter: PCI adapter
    Tdie:         +28.2°C
    Tctl:         +28.2°C

No extra values shown, but I think this is expected.

Unfortunately yes, but it helps to confirm that the detection works.

Quoted 2 lines

Tested-by Holger Kiehl <[email protected]>

Thanks again!

Guenter

Tested-by on the v2 series
#15 lore raw
In reply to Guenter Roeck
Quoted 1 line · On 18.01.20 at 18:26 Guenter Roeck wrote:

This patch series implements various improvements for the k10temp driver.

Tested with Asus Prime X370-PRO / 1700X / Linux 5.4.x

Idle:

it8665-isa-0290

Adapter: ISA adapter
in0:          +0.88 V  (min =  +1.27 V, max =  +2.00 V)
in1:          +2.52 V  (min =  +2.76 V, max =  +2.55 V)
in2:          +2.05 V  (min =  +1.23 V, max =  +0.16 V)
in3:          +2.01 V  (min =  +1.53 V, max =  +2.25 V)
in4:          +0.03 V  (min =  +2.67 V, max =  +2.43 V)
in5:          +0.03 V  (min =  +2.39 V, max =  +1.21 V)
in6:          +0.03 V  (min =  +1.67 V, max =  +0.56 V)
3VSB:         +3.31 V  (min =  +2.46 V, max =  +5.43 V)
Vbat:         +3.25 V
+3.3V:        +3.31 V
Fan CPU:      594 RPM  (min =   10 RPM)
Fan back:     380 RPM  (min =   11 RPM)
Fan front:    415 RPM  (min =   12 RPM)
fan5:           0 RPM  (min =   -1 RPM)  ALARM
fan6:           0 RPM  (min =   -1 RPM)  ALARM
CPU:          +28.0°C  (low  = +112.0°C, high =  -5.0°C)
Motherboard:  +30.0°C  (low  = -33.0°C, high = -18.0°C)  sensor = thermistor
temp3:        +29.0°C  (low  =  -1.0°C, high = -105.0°C)  sensor = thermistor
temp4:        +29.0°C  (low  = -74.0°C, high = +126.0°C)  sensor = thermistor
temp5:        +29.0°C  (low  = -49.0°C, high = +127.0°C)  sensor = thermistor
temp6:        +29.0°C  (low  = -82.0°C, high = -79.0°C)  sensor = thermistor
intrusion0:  ALARM

k10temp-pci-00c3

Adapter: PCI adapter
Vcore:        +0.90 V
Vsoc:         +0.90 V
CPU:          +28.6°C  (high = +70.0°C)
Tctl:         +48.6°C
Icore:        +5.20 A
Isoc:         +7.21 A

Load:

it8665-isa-0290

Adapter: ISA adapter
in0:          +1.38 V  (min =  +1.27 V, max =  +2.00 V)
in1:          +2.52 V  (min =  +2.76 V, max =  +2.55 V)
in2:          +2.04 V  (min =  +1.23 V, max =  +0.16 V)
in3:          +2.01 V  (min =  +1.53 V, max =  +2.25 V)
in4:          +0.03 V  (min =  +2.67 V, max =  +2.43 V)
in5:          +0.03 V  (min =  +2.39 V, max =  +1.21 V)
in6:          +0.03 V  (min =  +1.67 V, max =  +0.56 V)
3VSB:         +3.33 V  (min =  +2.46 V, max =  +5.43 V)
Vbat:         +3.25 V
+3.3V:        +3.33 V
Fan CPU:      798 RPM  (min =   10 RPM)
Fan back:     481 RPM  (min =   11 RPM)
Fan front:    460 RPM  (min =   12 RPM)
fan5:           0 RPM  (min =   -1 RPM)  ALARM
fan6:           0 RPM  (min =   -1 RPM)  ALARM
CPU:          +43.0°C  (low  = +112.0°C, high =  -5.0°C)
Motherboard:  +30.0°C  (low  = -33.0°C, high = -18.0°C)  sensor = thermistor
temp3:        +33.0°C  (low  =  -1.0°C, high = -105.0°C)  sensor = thermistor
temp4:        +33.0°C  (low  = -74.0°C, high = +126.0°C)  sensor = thermistor
temp5:        +33.0°C  (low  = -49.0°C, high = +127.0°C)  sensor = thermistor
temp6:        +33.0°C  (low  = -82.0°C, high = -79.0°C)  sensor = thermistor
intrusion0:  ALARM

k10temp-pci-00c3

Adapter: PCI adapter
Vcore:        +1.30 V
Vsoc:         +0.90 V
CPU:          +49.5°C  (high = +70.0°C)
Tctl:         +69.5°C
Icore:       +77.94 A
Isoc:         +9.02 A

it8665-isa-0290

Adapter: ISA adapter
in0:          +1.36 V  (min =  +1.27 V, max =  +2.00 V)
in1:          +2.52 V  (min =  +2.76 V, max =  +2.55 V)
in2:          +2.04 V  (min =  +1.23 V, max =  +0.16 V)
in3:          +2.00 V  (min =  +1.53 V, max =  +2.25 V)
in4:          +0.03 V  (min =  +2.67 V, max =  +2.43 V)
in5:          +0.03 V  (min =  +2.39 V, max =  +1.21 V)
in6:          +0.03 V  (min =  +1.67 V, max =  +0.56 V)
3VSB:         +3.33 V  (min =  +2.46 V, max =  +5.43 V)
Vbat:         +3.25 V
+3.3V:        +3.33 V
Fan CPU:     1044 RPM  (min =   10 RPM)
Fan back:     722 RPM  (min =   11 RPM)
Fan front:    633 RPM  (min =   12 RPM)
fan5:           0 RPM  (min =   -1 RPM)  ALARM
fan6:           0 RPM  (min =   -1 RPM)  ALARM
CPU:          +49.0°C  (low  = +112.0°C, high =  -5.0°C)
Motherboard:  +30.0°C  (low  = -33.0°C, high = -18.0°C)  sensor = thermistor
temp3:        +39.0°C  (low  =  -1.0°C, high = -105.0°C)  sensor = thermistor
temp4:        +39.0°C  (low  = -74.0°C, high = +126.0°C)  sensor = thermistor
temp5:        +39.0°C  (low  = -49.0°C, high = +127.0°C)  sensor = thermistor
temp6:        +39.0°C  (low  = -82.0°C, high = -79.0°C)  sensor = thermistor
intrusion0:  ALARM

k10temp-pci-00c3

Adapter: PCI adapter
Vcore:        +1.30 V
Vsoc:         +0.90 V
CPU:          +52.1°C  (high = +70.0°C)
Tctl:         +72.1°C
Icore:       +78.98 A
Isoc:         +9.02 A

=> I can see slight differences regarding CPU temperature and Vcore between it8665 and k10temp - especially on high load (kernel compile).

Thanks
Andreas