Skip to content

Fix st7703 panel initialization failures

Ondrej Jirman dri-devel lkml 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 7 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2drm/panel: st7703: Make the sleep exit timing match the specdrivers/gpu/drm/panel/panel-sitronix-st7703.c+2 -50 replies
2/2drm/panel: st7703: Fix the power up sequence of the paneldrivers/gpu/drm/panel/panel-sitronix-st7703.c+13 -90 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [PATCH 0/2] Fix st7703 panel initialization failures

When extending the driver for xbd599 panel support I tried to do minimal changes and keep the existing initialization timing.

It turned out that it's not good enough and the existing init sequence is too aggressive and doesn't follow the specification. On PinePhone panel is being powered down/up during suspend/resume and with current timings this frequently leads to corrupted display.

This patch series fixes the problems.

The issue was reported by Samuel Holland.

Relevant screenshots from the datasheet:

Power on timing: https://megous.com/dl/tmp/35b72e674ce0ca27.png
Power off timing: https://megous.com/dl/tmp/dea195517106ff17.png
More optimal reset on poweron: https://megous.com/dl/tmp/a9e5caf14e1b0dc6.png
Less optimal reset on poweron: https://megous.com/dl/tmp/246761039283c4cf.png
Datasheet: https://megous.com/dl/tmp/ST7703_DS_v01_20160128.pdf

Please take a look.

thank you and regards,
Ondrej Jirman

Ondrej Jirman (2):
drm/panel: st7703: Make the sleep exit timing match the spec drm/panel: st7703: Fix the power up sequence of the panel

 drivers/gpu/drm/panel/panel-sitronix-st7703.c | 29 ++++++++++---------
 1 file changed, 15 insertions(+), 14 deletions(-)
Signature · 1 line
2.27.0