Skip to content

Add file-backed and write-once features to OTP

Green Wan qemu-devel qemu-riscv 8 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v8 Latest2 patches 1 replyIn review
  2. v7 RFC2 patches 3 repliesSuperseded
  3. v6 RFC2 patches 6 repliesSuperseded
Earlier versions · 5
VersionPostedPatchesRepliesStatus
v5 RFC2 patches10 repliesSuperseded
v4 RFC2 patches3 repliesSuperseded
v3 RFC2 patches2 repliesSuperseded
v2 RFC2 patches4 repliesSuperseded
v1 RFC2 patches3 repliesSuperseded

v6 to v7 from the cover letter

- Rebase to the latest and move debug message patch from patch [2/2] to [1/2]
- Remove RFC tag and add credit

Patches in v8 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2hw/misc/sifive_u_otp: Add write function and write-once protectionhw/misc/sifive_u_otp.c include/hw/misc/sifive_u_otp.h+32 -10 replies
2/2hw/misc/sifive_u_otp: Add backend drive supporthw/misc/sifive_u_otp.c include/hw/misc/sifive_u_otp.h+67 -01 reply

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchAlistair FrancisBin Meng
1/2R-b R-b T-b
2/2A-b R-b T-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v8 thread

Cover letter [PATCH v8 0/2] Add file-backed and write-once features to OTP

patch [1/2] - add write function and wrire-once feature patch [2/2] - add file backend support

Test Steps: (should work even only 1/2 is applied)
1) Follow instructions to prepare fw_payload - https://github.com/riscv/opensbi/blob/master/docs/platform/sifive_fu540.md

    a) build 1-round opensbi
       $ cd opensbi
       $ OBJCOPY=riscv64-buildroot-linux-gnu-objcopy \
       LD=riscv64-buildroot-linux-gnu-ld \
       CC=riscv64-buildroot-linux-gnu-gcc \
       make PLATFORM=sifive/fu540
    b) build u-boot
       # Make sure the 'CONFIG_SIFIVE_OTP=y' is set
       $ cd u-boot
       $ OPENSBI=/xxx/opensbi/build/platform/sifive/fu540/firmware/fw_dynamic.bin \
       ARCH=riscv \
       CROSS_COMPILE=riscv64-buildroot-linux-gnu- \
       make
    c) generate fw_payload.elf
       $ cd opensbi
       $ OBJCOPY=riscv64-buildroot-linux-gnu-objcopy \
       LD=riscv64-buildroot-linux-gnu-ld \
       CC=riscv64-buildroot-linux-gnu-gcc \
       make PLATFORM=sifive/fu540 FW_PAYLOAD_PATH=/xxx/u-boot/u-boot.bin
 2) Apply uboot test patch - http://patchwork.ozlabs.org/project/uboot/patch/[email protected]/
    Rebuild u-boot and fw_payload.elf
 3) Generate empty otp image. (skip this if only 1/2 is applied.)
    $ dd if=/dev/zero of=./otp.img bs=1k count=16
 4) run qemu with fw_payload.elf
    $ qemu-system-riscv64 -M sifive_u -m 256M -nographic -bios none \
      -kernel ../opensbi/build/platform/sifive/fu540/firmware/fw_payload.elf \
      -d guest_errors -drive if=none,format=raw,file=otp.img 
 5) (uboot otp driver should do some read/write already) Run read/write in u-boot
# dump mem before test
=> md 80200000 10
80200000: 84ae822a 00061297 7642b283 10529073    *.........Bvs.R.
80200010: 10401073 031b52c1 13134010 71330153    [email protected][email protected]
80200020: 850a0053 28c0b0ef 812a81aa 00062297    S......(..*.."..
80200030: 94c2b283 a92f4905 16630862 22970209    .....I/.b.c...."
=> md 80400000 10
80400000: 00000000 00000000 00000000 00000000    ................
80400010: 00000000 00000000 00000000 00000000    ................
80400020: 00000000 00000000 00000000 00000000    ................
80400030: 00000000 00000000 00000000 00000000    ................
# check read function and see if serial is set
=> misc read  otp@10070000 3f0 80400000 10
=> md 80400000 10
80400000: 00000001 fffffffe 00000000 00000000    ................
80400010: 00000000 00000000 00000000 00000000    ................
80400020: 00000000 00000000 00000000 00000000    ................
80400030: 00000000 00000000 00000000 00000000    ................
# check write function
=> misc write otp@10070000 0 80200000 10
=> misc read  otp@10070000 0 80400000 10
=> md 80400000 10
80400000: 84ae822a 00061297 7642b283 10529073    *.........Bvs.R.
80400010: 00000000 00000000 00000000 00000000    ................
80400020: 00000000 00000000 00000000 00000000    ................
80400030: 00000000 00000000 00000000 00000000    ................
=>

Changelogs:
v6 to v7:
- Rebase to the latest and move debug message patch from patch [2/2] to [1/2]
- Remove RFC tag and add credit

v6 to v7:
- Fix bug in MACRO, SET_FUSEARRAY_BIT.
- Add serial initialization in sifive_u_otp_reset().
- revise write-once error message.

v5 to v6:
- Rebase to latest. (sifive_u_otp.* are moved to hw/misc)
- Put the example command to commit message.
- Refine errp handle when check backend drive.
- Remove unnecessary debug message.

v4 to v5:
- Change the patch order
- Add write operation to update pdin to fuse[] bit by bit
- Fix wrong protection for offset 0x0~0x38
- Add SIFIVE_U_OTP_PWE_EN definition
- Refine access macro for fuse[] and fuse_wo[]

Summary of Patches
- First patch is to add write opertion to update pdin data to fuse[] bit by bit. Add 'write-once' feature to block second write to same bit of the OTP memory.

- Second patch is to add file-backed implementation to allow users to use '-drive' to assign an OTP raw image file. OTP image file must be bigger than 16K.

For example, '-drive if=none,format=raw,file=otp.img'

Testing
- Tested on sifive_u for both qemu and u-boot.

Green Wan (2):
hw/misc/sifive_u_otp: Add write function and write-once protection hw/misc/sifive_u_otp: Add backend drive support

 hw/misc/sifive_u_otp.c         | 95 +++++++++++++++++++++++++++++++++-
 include/hw/misc/sifive_u_otp.h |  5 ++
 2 files changed, 99 insertions(+), 1 deletion(-)
Signature · 1 line
2.17.1