Skip to content

DTS updates for Marvell Armada CN913x platforms

[email protected] linux-arm-kernel linux-devicetree linux-phy lkml 7 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v7 Latest5 patches 2 repliesIn review
  2. v65 patches 5 repliesSuperseded
  3. v55 patches 2 repliesSuperseded
Earlier versions · 4
VersionPostedPatchesRepliesStatus
v45 patches3 repliesSuperseded
v34 patches4 repliesSuperseded
v24 patches8 repliesSuperseded
v14 patches5 repliesSuperseded

Changes in v7 from the cover letter

- Remove documentation patch fixing CP11X references in PHY binding document
- Change Armada's family 10Gb port phy mode names from 10gbase-kr to 10gbase-r

Patches in v7 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/5arch/arm64/boot/dts/marvell: fix NAND partitioning schemearch/arm64/boot/dts/marvell/cn9130-db.dts+1 -10 replies
2/5arm64: dts: cn913x: add device trees for topology B boardsarch/arm64/boot/dts/marvell/Makefile arch/arm64/boot/dts/marvell/cn9130-db-B.dts arch/arm64/boot/dts/marvell/cn9130-db.dts +7 more+930 -8000 replies
3/5dts: marvell: Enable 10G interfaces on 9130-DB and 9131-DB boardsarch/arm64/boot/dts/marvell/cn9130-db.dtsi arch/arm64/boot/dts/marvell/cn9131-db.dtsi+2 -20 replies
4/5arm64: dts: add support for Marvell cn9130-crb platformarch/arm64/boot/dts/marvell/Makefile arch/arm64/boot/dts/marvell/cn9130-crb-A.dts arch/arm64/boot/dts/marvell/cn9130-crb-B.dts +1 more+308 -00 replies
5/5arch/arm64: dts: change 10gbase-kr to 10gbase-r in Armadaarch/arm64/boot/dts/marvell/armada-7040-db.dts arch/arm64/boot/dts/marvell/armada-8040-db.dts arch/arm64/boot/dts/marvell/cn9130-crb.dtsi +3 more+7 -71 reply

Reviews trailers per patch

1 of 5 patches has a Reviewed-by or Acked-by.

PatchRussell King (Oracle)
1/5
2/5
3/5
4/5
5/5R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v7 thread

Cover letter [PATCH v7 0/5] DTS updates for Marvell Armada CN913x platforms

From: Konstantin Porotchkin <[email protected]>

This patch series contains the following changes/fixes:
1. Add support for Armada CN913x Development Board topology "B"
2. Add support for Armada CN913x Reference Design boards (CRB)
3. Fixes the NAND paritioninig scheme in DTS eliminating gap between consecutive partitions
4. Fix 10Gb ports PHY mode names

v2:
- extract common nodes from DB boards to separate DTSI files
- disable eth2 on CRB boards until the required phy mode support is added
- mention the switch part ID in CRB board description

v3:
- do not rename setup A DTS files for DB variants
- fix a couple of wrong include names

v4:
- Rebase on top of Linus master branch (v5.11-rc7)
- Remove HS400 timing from CRB AP SDHCI (not supported by connected eMMC)
- Add cd-gpio entry to CP0 SDHCI for SD card support
- Add a comment to CN9130-CRB patch about the required defconfig changes for supporting the onboard i2c expander
- Add Stefan's patch to enable 10G port on CN9130-DB platforms

v5:
- Extend enablement of 10G port to CN9131-DB platform

v6:
- Rebased on top of 5.13-rc, merging UTMI settings (requested by Gregory Clement)

v7:
- Remove documentation patch fixing CP11X references in PHY binding document
- Change Armada's family 10Gb port phy mode names from 10gbase-kr to 10gbase-r

Konstantin Porotchkin (4):
arch/arm64/boot/dts/marvell: fix NAND partitioning scheme
arm64: dts: cn913x: add device trees for topology B boards
arm64: dts: add support for Marvell cn9130-crb platform arch/arm64: dts: change 10gbase-kr to 10gbase-r in Armada

Stefan Chulski (1):
dts: marvell: Enable 10G interfaces on 9130-DB and 9131-DB boards

 arch/arm64/boot/dts/marvell/Makefile          |   5 +
 .../arm64/boot/dts/marvell/armada-7040-db.dts |   2 +-
 .../arm64/boot/dts/marvell/armada-8040-db.dts |   4 +-
 arch/arm64/boot/dts/marvell/cn9130-crb-A.dts  |  38 ++
 arch/arm64/boot/dts/marvell/cn9130-crb-B.dts  |  46 ++
 arch/arm64/boot/dts/marvell/cn9130-crb.dtsi   | 222 ++++++++++
 arch/arm64/boot/dts/marvell/cn9130-db-B.dts   |  22 +
 arch/arm64/boot/dts/marvell/cn9130-db.dts     | 403 +----------------
 arch/arm64/boot/dts/marvell/cn9130-db.dtsi    | 410 ++++++++++++++++++
 arch/arm64/boot/dts/marvell/cn9131-db-B.dts   |  22 +
 arch/arm64/boot/dts/marvell/cn9131-db.dts     | 197 +--------
 arch/arm64/boot/dts/marvell/cn9131-db.dtsi    | 206 +++++++++
 arch/arm64/boot/dts/marvell/cn9132-db-B.dts   |  22 +
 arch/arm64/boot/dts/marvell/cn9132-db.dts     | 218 +---------
 arch/arm64/boot/dts/marvell/cn9132-db.dtsi    | 227 ++++++++++
 15 files changed, 1241 insertions(+), 803 deletions(-)
 create mode 100644 arch/arm64/boot/dts/marvell/cn9130-crb-A.dts
 create mode 100644 arch/arm64/boot/dts/marvell/cn9130-crb-B.dts
 create mode 100644 arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
 create mode 100644 arch/arm64/boot/dts/marvell/cn9130-db-B.dts
 create mode 100644 arch/arm64/boot/dts/marvell/cn9130-db.dtsi
 create mode 100644 arch/arm64/boot/dts/marvell/cn9131-db-B.dts
 create mode 100644 arch/arm64/boot/dts/marvell/cn9131-db.dtsi
 create mode 100644 arch/arm64/boot/dts/marvell/cn9132-db-B.dts
 create mode 100644 arch/arm64/boot/dts/marvell/cn9132-db.dtsi
Signature · 1 line
2.17.1