Skip to content

Add a tool for using the new sysfs files

[email protected] linux-nfs 7 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v7 Latest9 patches 4 repliesIn review
  2. v69 patches 0 repliesSuperseded
  3. v59 patches 4 repliesSuperseded
Earlier versions · 4
VersionPostedPatchesRepliesStatus
v49 patches2 repliesSuperseded
v39 patches1 replySuperseded
v29 patches5 repliesSuperseded
v1 RFC6 patches2 repliesSuperseded

Changes in v7 from the cover letter

- Fix up detecting if sysfs is mounted

Patches in v7 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/9rpcctl: Add a rpcctl.py tooltools/rpcctl/rpcctl.py+25 -02 replies
2/9rpcctl: Add a command for printing xprt switch informationtools/rpcctl/rpcctl.py+68 -00 replies
3/9rpcctl: Add a command for printing individual xprtstools/rpcctl/rpcctl.py+42 -10 replies
4/9rpcctl: Add a command for printing rpc client informationtools/rpcctl/rpcctl.py+30 -20 replies
5/9rpcctl: Add a command for changing xprt dstaddrtools/rpcctl/rpcctl.py+31 -00 replies
6/9rpcctl: Add a command for changing xprt switch dstaddrstools/rpcctl/rpcctl.py+16 -00 replies
7/9rpcctl: Add a command for changing xprt statetools/rpcctl/rpcctl.py+24 -30 replies
8/9rpcctl: Add a man pagetools/rpcctl/rpcctl.man+88 -02 replies
9/9rpcctl: Add installation to the Makefileconfigure.ac tools/Makefile.am tools/rpcctl/Makefile.am+15 -10 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v7 yet.

Read the v7 thread

Cover letter [PATCH v7 0/9] Add a tool for using the new sysfs files

From: Anna Schumaker <[email protected]>

These patches implement a tool that can be used to read and write the sysfs files, with subcommands!

The following subcommands are implemented:
rpcctl client
rpcctl switch
rpcctl switch set
rpcctl xprt
rpcctl xprt set

So you can print out information about every switch with:
anna@client ~ % rpcctl switch
switch 0: xprts 1, active 1, queue 0
xprt 0: local, /var/run/gssproxy.sock [main]
switch 1: xprts 1, active 1, queue 0
xprt 1: local, /var/run/rpcbind.sock [main]
switch 2: xprts 1, active 1, queue 0
xprt 2: tcp, 192.168.111.1 [main]
switch 3: xprts 4, active 4, queue 0
xprt 3: tcp, 192.168.111.188 [main] xprt 4: tcp, 192.168.111.188
xprt 5: tcp, 192.168.111.188
xprt 6: tcp, 192.168.111.188

And information about each xprt:

	anna@client ~ % rpcctl xprt
	xprt 0: local, /var/run/gssproxy.sock, port 0, state <CONNECTED,BOUND>, main
		Source: (einval), port 0, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
	xprt 1: local, /var/run/rpcbind.sock, port 0, state <CONNECTED,BOUND>, main
		Source: (einval), port 0, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
	xprt 2: tcp, 192.168.111.1, port 2049, state <CONNECTED,BOUND>, main
		Source: 192.168.111.222, port 959, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
	xprt 3: tcp, 192.168.111.188, port 2049, state <CONNECTED,BOUND>, main
		Source: 192.168.111.222, port 921, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
	xprt 4: tcp, 192.168.111.188, port 2049, state <CONNECTED,BOUND>
		Source: 192.168.111.222, port 726, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
	xprt 5: tcp, 192.168.111.188, port 2049, state <CONNECTED,BOUND>
		Source: 192.168.111.222, port 671, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
	xprt 6: tcp, 192.168.111.188, port 2049, state <CONNECTED,BOUND>
		Source: 192.168.111.222, port 934, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0

You can use the set subcommand to change the dstaddr of individual xprts:

	anna@client ~ % sudo rpcctl xprt --id 4 
	xprt 4: tcp, 192.168.111.188, port 2049, state <CONNECTED,BOUND>
		Source: 192.168.111.222, port 726, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
	anna@client ~ % sudo rpcctl xprt set --id 4 --dstaddr server2.nowheycreamery.com
	xprt 4: tcp, 192.168.111.186, port 2049, state <CONNECTED,BOUND>
		Source: 192.168.111.222, port 726, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0

Or for changing the dstaddr of all xprts attached to a switch:

	anna@client % rpcctl switch --id 3
	switch 3: xprts 4, active 4, queue 0
		xprt 3: tcp, 192.168.111.188 [main]
		xprt 4: tcp, 192.168.111.188
		xprt 5: tcp, 192.168.111.188
		xprt 6: tcp, 192.168.111.188
	anna@client % sudo rpcctl switch set --id 4 --dstaddr server2.nowheycreamery.vm
	switch 3: xprts 4, active 4, queue 0
		xprt 2: tcp, 192.168.111.186 [main]
		xprt 3: tcp, 192.168.111.186
		xprt 5: tcp, 192.168.111.186
		xprt 6: tcp, 192.168.111.186

Changes in v7:
- Fix up detecting if sysfs is mounted

Thoughts?
Anna

Anna Schumaker (9):
rpcctl: Add a rpcctl.py tool
rpcctl: Add a command for printing xprt switch information
rpcctl: Add a command for printing individual xprts
rpcctl: Add a command for printing rpc client information
rpcctl: Add a command for changing xprt dstaddr
rpcctl: Add a command for changing xprt switch dstaddrs
rpcctl: Add a command for changing xprt state
rpcctl: Add a man page
rpcctl: Add installation to the Makefile

 configure.ac             |   1 +
 tools/Makefile.am        |   2 +-
 tools/rpcctl/Makefile.am |  13 +++
 tools/rpcctl/rpcctl.man  |  88 +++++++++++++++
 tools/rpcctl/rpcctl.py   | 230 +++++++++++++++++++++++++++++++++++++++
 5 files changed, 333 insertions(+), 1 deletion(-)
 create mode 100644 tools/rpcctl/Makefile.am
 create mode 100644 tools/rpcctl/rpcctl.man
 create mode 100755 tools/rpcctl/rpcctl.py
Signature · 1 line
2.35.0