Skip to contentSkip to conversation

Add a tool for using the new sysfs files

PATCH Superseded [email protected] 3 participants 15 messages Aug 6, 2021 – Aug 23, 2021

Subsystems (2)

v2 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

v2 cover Add a tool for using the new sysfs files

From: Anna Schumaker <[email protected]>

These patches implement a tool that can be used to read and write the sysfs files, with subcommands! They do need my extra patches to add in srcaddr and dst_port to the xprt_info file. Let me know if I need to resend adding support for kernels both with and without these patches.

The following subcommands are implemented:
nfs-sysfs.py rpc-client
nfs-sysfs.py xprt
nfs-sysfs.py xprt set
nfs-sysfs.py xprt-switch
nfs-sysfs.py xprt-switch set

So you can print out information about every xprt-switch with:
anna@client ~ % nfs-sysfs xprt-switch
switch 0: num_xprts 1, num_active 1, queue_len 0
xprt 0: local, /var/run/gssproxy.sock [main]
switch 1: num_xprts 1, num_active 1, queue_len 0
xprt 1: local, /var/run/rpcbind.sock [main]
switch 2: num_xprts 1, num_active 1, queue_len 0
xprt 2: tcp, 192.168.111.1 [main]
switch 3: num_xprts 4, num_active 4, queue_len 0
xprt 3: tcp, 192.168.111.188 [main] xprt 4: tcp, 192.168.111.188
xprt 5: tcp, 192.168.111.188
xprt 6: tcp, 192.168.111.188

And information about each xprt:

	anna@client ~ % nfs-sysfs xprt       
	xprt 0: local, /var/run/gssproxy.sock, port 0, state <MAIN,CONNECTED,BOUND>
		Source: (einval), port 0, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
	xprt 1: local, /var/run/rpcbind.sock, port 0, state <MAIN,CONNECTED,BOUND>
		Source: (einval), port 0, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
	xprt 2: tcp, 192.168.111.1, port 2049, state <MAIN,CONNECTED,BOUND>
		Source: 192.168.111.222, port 959, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
	xprt 3: tcp, 192.168.111.188, port 2049, state <MAIN,CONNECTED,BOUND>
		Source: 192.168.111.222, port 921, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
	xprt 4: tcp, 192.168.111.188, port 2049, state <CONNECTED,BOUND>
		Source: 192.168.111.222, port 726, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
	xprt 5: tcp, 192.168.111.188, port 2049, state <CONNECTED,BOUND>
		Source: 192.168.111.222, port 671, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
	xprt 6: tcp, 192.168.111.188, port 2049, state <CONNECTED,BOUND>
		Source: 192.168.111.222, port 934, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0

You can use the set subcommand to change the dstaddr of individual xprts:

	anna@client ~ % sudo nfs-sysfs xprt --id 4 
	xprt 4: tcp, 192.168.111.188, port 2049, state <CONNECTED,BOUND>
		Source: 192.168.111.222, port 726, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
	anna@client ~ % sudo nfs-sysfs xprt set --id 4 --dstaddr server2.nowheycreamery.com
	xprt 4: tcp, 192.168.111.186, port 2049, state <CONNECTED,BOUND>
		Source: 192.168.111.222, port 726, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0

Or for changing the dstaddr of all xprts attached to a switch:

	anna@client % ./nfs-sysfs.py xprt-switch --id 3
	switch 3: num_xprts 4, num_active 4, queue_len 0
		xprt 3: tcp, 192.168.111.188 [main]
		xprt 4: tcp, 192.168.111.188
		xprt 5: tcp, 192.168.111.188
		xprt 6: tcp, 192.168.111.188
	anna@client % sudo ./nfs-sysfs.py xprt-switch set --id 4 --dstaddr server2.nowheycreamery.vm
	switch 3: num_xprts 4, num_active 4, queue_len 0
		xprt 2: tcp, 192.168.111.186 [main]
		xprt 3: tcp, 192.168.111.186
		xprt 5: tcp, 192.168.111.186
		xprt 6: tcp, 192.168.111.186

What does everybody think? Is there any thing I should change about the user input or output lines? How about other subcommands that should be added with the initial submission?

Thanks,
Anna

Anna Schumaker (9):
nfs-sysfs: Add an nfs-sysfs.py tool
nfs-sysfs.py: Add a command for printing xprt switch information nfs-sysfs.py: Add a command for printing individual xprts nfs-sysfs.py: Add a command for printing rpc-client information nfs-sysfs.py: Add a command for changing xprt dstaddr nfs-sysfs.py: Add a command for changing xprt-switch dstaddrs nfs-sysfs.py: Add a command for changing xprt state
nfs-sysfs: Add a man page
nfs-sysfs: Add installation to the Makefile

 .gitignore                    |   2 +
 configure.ac                  |   1 +
 tools/Makefile.am             |   2 +-
 tools/nfs-sysfs/Makefile.am   |  20 +++++++
 tools/nfs-sysfs/client.py     |  27 +++++++++
 tools/nfs-sysfs/nfs-sysfs     |   5 ++
 tools/nfs-sysfs/nfs-sysfs.man |  88 +++++++++++++++++++++++++++++
 tools/nfs-sysfs/nfs-sysfs.py  |  23 ++++++++
 tools/nfs-sysfs/switch.py     |  51 +++++++++++++++++
 tools/nfs-sysfs/sysfs.py      |  28 ++++++++++
 tools/nfs-sysfs/xprt.py       | 101 ++++++++++++++++++++++++++++++++++
 11 files changed, 347 insertions(+), 1 deletion(-)
 create mode 100644 tools/nfs-sysfs/Makefile.am
 create mode 100644 tools/nfs-sysfs/client.py
 create mode 100644 tools/nfs-sysfs/nfs-sysfs
 create mode 100644 tools/nfs-sysfs/nfs-sysfs.man
 create mode 100755 tools/nfs-sysfs/nfs-sysfs.py
 create mode 100644 tools/nfs-sysfs/switch.py
 create mode 100644 tools/nfs-sysfs/sysfs.py
 create mode 100644 tools/nfs-sysfs/xprt.py
Signature · 1 line
2.32.0
#1 lore raw

PATCH v2 1/9 nfs-sysfs: Add an nfs-sysfs.py tool

From: Anna Schumaker <[email protected]>

This will be used to print and manipulate the sunrpc sysfs directory files. Running without arguments prints both usage information and the location of the sunrpc sysfs directory.

---
 .gitignore                   |  2 ++
 tools/nfs-sysfs/nfs-sysfs.py | 13 +++++++++++++
 tools/nfs-sysfs/sysfs.py     | 18 ++++++++++++++++++
 3 files changed, 33 insertions(+)
 create mode 100755 tools/nfs-sysfs/nfs-sysfs.py
 create mode 100644 tools/nfs-sysfs/sysfs.py
.gitignore +2 -0
index c89d1cd2583d..a476bd20bc3b 100644
@@ -84,3 +84,5 @@ systemd/rpc-gssd.service
 cscope.*
 # generic editor backup et al
 *~
+# python bytecode
+__pycache__
tools/nfs-sysfs/nfs-sysfs.py new file +13 -0
new file mode 100755
index 000000000000..8ff59ea9e81b
@@ -0,0 +1,13 @@
+#!/usr/bin/python
+import argparse
+import sysfs
+
+parser = argparse.ArgumentParser()
+
+def show_small_help(args):
+    parser.print_usage()
+    print("sunrpc dir:", sysfs.SUNRPC)
+parser.set_defaults(func=show_small_help)
+
+args = parser.parse_args()
+args.func(args)
tools/nfs-sysfs/sysfs.py new file +18 -0
new file mode 100644
index 000000000000..0b358f57bb28
@@ -0,0 +1,18 @@
+import pathlib
+import sys
+
+MOUNT = None
+with open("/proc/mounts", 'r') as f:
+    for line in f:
+        if "sysfs" in line:
+            MOUNT = line.split()[1]
+            break
+
+if MOUNT == None:
+    print("ERROR: sysfs is not mounted")
+    sys.exit(1)
+
+SUNRPC = pathlib.Path(MOUNT) / "kernel" / "sunrpc"
+if not SUNRPC.is_dir():
+    print("ERROR: sysfs does not have sunrpc directory")
+    sys.exit(1)
Signature · 1 line
2.32.0
#2 lore raw

Re: [PATCH v2 1/9] nfs-sysfs: Add an nfs-sysfs.py tool

Hello Anna,

Comments are inline.

--Jorge

On 8/6/21, 2:17 PM, "Anna Schumaker on behalf of [email protected]" <[email protected] on behalf of [email protected]> wrote:

    NetApp Security WARNING: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe.




    From: Anna Schumaker <[email protected]>

    This will be used to print and manipulate the sunrpc sysfs directory
    files. Running without arguments prints both usage information and the
    location of the sunrpc sysfs directory.

    Signed-off-by: Anna Schumaker <[email protected]>
    ---
     .gitignore                   |  2 ++
     tools/nfs-sysfs/nfs-sysfs.py | 13 +++++++++++++
     tools/nfs-sysfs/sysfs.py     | 18 ++++++++++++++++++
     3 files changed, 33 insertions(+)
     create mode 100755 tools/nfs-sysfs/nfs-sysfs.py
     create mode 100644 tools/nfs-sysfs/sysfs.py

    diff --git a/.gitignore b/.gitignore
    index c89d1cd2583d..a476bd20bc3b 100644
    --- a/.gitignore
    +++ b/.gitignore
    @@ -84,3 +84,5 @@ systemd/rpc-gssd.service
     cscope.*
     # generic editor backup et al
     *~
    +# python bytecode
    +__pycache__
    diff --git a/tools/nfs-sysfs/nfs-sysfs.py b/tools/nfs-sysfs/nfs-sysfs.py
    new file mode 100755
    index 000000000000..8ff59ea9e81b
    --- /dev/null
    +++ b/tools/nfs-sysfs/nfs-sysfs.py
    @@ -0,0 +1,13 @@
    +#!/usr/bin/python
    +import argparse
    +import sysfs
    +
    +parser = argparse.ArgumentParser()
    +
    +def show_small_help(args):
    +    parser.print_usage()
    +    print("sunrpc dir:", sysfs.SUNRPC)
    +parser.set_defaults(func=show_small_help)
    +
    +args = parser.parse_args()
    +args.func(args)
    diff --git a/tools/nfs-sysfs/sysfs.py b/tools/nfs-sysfs/sysfs.py
    new file mode 100644
    index 000000000000..0b358f57bb28
    --- /dev/null
    +++ b/tools/nfs-sysfs/sysfs.py
    @@ -0,0 +1,18 @@
    +import pathlib
    +import sys
    +
    +MOUNT = None
    +with open("/proc/mounts", 'r') as f:
    +    for line in f:

JM: The following could select the wrong mount line.
+ if "sysfs" in line:
JM: Match "sysfs" at the beginning of the line instead:
if re.search(r"^sysfs\s", line):
+ MOUNT = line.split()[1]
+ break
+
JM: The preferred way is to use "MOUNT is None", but this is just a guideline and it should work either way.
+if MOUNT == None:
+ print("ERROR: sysfs is not mounted")
+ sys.exit(1)
+
+SUNRPC = pathlib.Path(MOUNT) / "kernel" / "sunrpc"
+if not SUNRPC.is_dir():
+ print("ERROR: sysfs does not have sunrpc directory")
+ sys.exit(1)
--
2.32.0

#3 lore raw

Re: [PATCH v2 1/9] nfs-sysfs: Add an nfs-sysfs.py tool

Hi Jorge,

Quoted 66 lines · Jorge

Hello Anna,

Comments are inline.

--Jorge

On 8/6/21, 2:17 PM, "Anna Schumaker on behalf of [email protected]" <[email protected] on behalf of [email protected]> wrote:

    NetApp Security WARNING: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe.




    From: Anna Schumaker <[email protected]>

    This will be used to print and manipulate the sunrpc sysfs directory
    files. Running without arguments prints both usage information and the
    location of the sunrpc sysfs directory.

    Signed-off-by: Anna Schumaker <[email protected]>
    ---
     .gitignore                   |  2 ++
     tools/nfs-sysfs/nfs-sysfs.py | 13 +++++++++++++
     tools/nfs-sysfs/sysfs.py     | 18 ++++++++++++++++++
     3 files changed, 33 insertions(+)
     create mode 100755 tools/nfs-sysfs/nfs-sysfs.py
     create mode 100644 tools/nfs-sysfs/sysfs.py

    diff --git a/.gitignore b/.gitignore
    index c89d1cd2583d..a476bd20bc3b 100644
    --- a/.gitignore
    +++ b/.gitignore
    @@ -84,3 +84,5 @@ systemd/rpc-gssd.service
     cscope.*
     # generic editor backup et al
     *~
    +# python bytecode
    +__pycache__
    diff --git a/tools/nfs-sysfs/nfs-sysfs.py b/tools/nfs-sysfs/nfs-sysfs.py
    new file mode 100755
    index 000000000000..8ff59ea9e81b
    --- /dev/null
    +++ b/tools/nfs-sysfs/nfs-sysfs.py
    @@ -0,0 +1,13 @@
    +#!/usr/bin/python
    +import argparse
    +import sysfs
    +
    +parser = argparse.ArgumentParser()
    +
    +def show_small_help(args):
    +    parser.print_usage()
    +    print("sunrpc dir:", sysfs.SUNRPC)
    +parser.set_defaults(func=show_small_help)
    +
    +args = parser.parse_args()
    +args.func(args)
    diff --git a/tools/nfs-sysfs/sysfs.py b/tools/nfs-sysfs/sysfs.py
    new file mode 100644
    index 000000000000..0b358f57bb28
    --- /dev/null
    +++ b/tools/nfs-sysfs/sysfs.py
    @@ -0,0 +1,18 @@
    +import pathlib
    +import sys
Quoted 8 lines
    +
    +MOUNT = None
    +with open("/proc/mounts", 'r') as f:
    +    for line in f:
JM: The following could select the wrong mount line.
    +        if "sysfs" in line:
JM: Match "sysfs" at the beginning of the line instead:
              if re.search(r"^sysfs\s", line):

On my system, the beginning of the line is "sys" and not "sysfs". Is it called "sysfs" on yours? That might be something I need to account for if it's different.

Anna

Quoted 16 lines

+ MOUNT = line.split()[1]
+ break
+
JM: The preferred way is to use "MOUNT is None", but this is just a guideline and it should work either way.
+if MOUNT == None:
+ print("ERROR: sysfs is not mounted")
+ sys.exit(1)
+
+SUNRPC = pathlib.Path(MOUNT) / "kernel" / "sunrpc"
+if not SUNRPC.is_dir():
+ print("ERROR: sysfs does not have sunrpc directory")
+ sys.exit(1)
--
2.32.0

#4 lore raw

PATCH v2 2/9 nfs-sysfs.py: Add a command for printing xprt switch information

In reply to [email protected]

From: Anna Schumaker <[email protected]>

This combines the information found in xprt_switch_info with a subset of the information found in each xprt subdirectory

---
 tools/nfs-sysfs/nfs-sysfs.py |  6 ++++++
 tools/nfs-sysfs/switch.py    | 35 +++++++++++++++++++++++++++++++++++
 tools/nfs-sysfs/sysfs.py     | 10 ++++++++++
 tools/nfs-sysfs/xprt.py      | 12 ++++++++++++
 4 files changed, 63 insertions(+)
 create mode 100644 tools/nfs-sysfs/switch.py
 create mode 100644 tools/nfs-sysfs/xprt.py
tools/nfs-sysfs/nfs-sysfs.py +6 -0
index 8ff59ea9e81b..90efcbed7ac8 100755
@@ -9,5 +9,11 @@ def show_small_help(args):
     print("sunrpc dir:", sysfs.SUNRPC)
 parser.set_defaults(func=show_small_help)
 
+
+import switch
+subparser = parser.add_subparsers(title="commands")
+switch.add_command(subparser)
+
+
 args = parser.parse_args()
 args.func(args)
tools/nfs-sysfs/switch.py new file +35 -0
new file mode 100644
index 000000000000..afb6963a0a1f
@@ -0,0 +1,35 @@
+import sysfs
+import xprt
+
+class XprtSwitch:
+    def __init__(self, path):
+        self.path = path
+        self.id = int(str(path).rsplit("-", 1)[1])
+
+        self.xprts = [ xprt.Xprt(p) for p in self.path.iterdir() if p.is_dir() ]
+        self.xprts.sort()
+
+        self.__dict__.update(sysfs.read_info_file(path / "xprt_switch_info"))
+
+    def __lt__(self, rhs):
+        return self.path < rhs.path
+
+    def __str__(self):
+        line = "switch %s: num_xprts %s, num_active %s, queue_len %s" % \
+                (self.id, self.num_xprts, self.num_active, self.queue_len)
+        for x in self.xprts:
+            line += "\n	%s" % x.small_str()
+        return line
+
+
+def list_xprt_switches(args):
+    switches = [ XprtSwitch(f) for f in (sysfs.SUNRPC / "xprt-switches").iterdir() ]
+    switches.sort()
+    for xs in switches:
+        if args.id == None or xs.id == args.id[0]:
+            print(xs)
+
+def add_command(subparser):
+    parser = subparser.add_parser("xprt-switch", help="Commands for xprt switches")
+    parser.add_argument("--id", metavar="ID", nargs=1, type=int, help="Id of a specific xprt-switch to show")
+    parser.set_defaults(func=list_xprt_switches)
tools/nfs-sysfs/sysfs.py +10 -0
index 0b358f57bb28..32dcf74438de 100644
@@ -16,3 +16,13 @@ SUNRPC = pathlib.Path(MOUNT) / "kernel" / "sunrpc"
 if not SUNRPC.is_dir():
     print("ERROR: sysfs does not have sunrpc directory")
     sys.exit(1)
+
+
+def read_info_file(path):
+    res = dict()
+    with open(path) as info:
+        for line in info:
+            if "=" in line:
+                (key, val) = line.strip().split("=")
+                res[key] = int(val)
+    return res
tools/nfs-sysfs/xprt.py new file +12 -0
new file mode 100644
index 000000000000..d37537771c1d
@@ -0,0 +1,12 @@
+class Xprt:
+    def __init__(self, path):
+        self.path = path
+        self.id = int(str(path).rsplit("-", 2)[1])
+        self.type = str(path).rsplit("-", 2)[2]
+        self.dstaddr = open(path / "dstaddr", 'r').readline().strip()
+
+    def __lt__(self, rhs):
+        return self.id < rhs.id
+
+    def small_str(self):
+        return "xprt %s: %s, %s" % (self.id, self.type, self.dstaddr)
Signature · 1 line
2.32.0
#5 lore raw

PATCH v2 3/9 nfs-sysfs.py: Add a command for printing individual xprts

In reply to [email protected]

From: Anna Schumaker <[email protected]>

This shows more detailed information than what is presented with xprt switches. I take the chance to add a main-export indicator to the small_str() used when printing out xprt-switches.

---
 tools/nfs-sysfs/nfs-sysfs.py |  2 ++
 tools/nfs-sysfs/xprt.py      | 38 +++++++++++++++++++++++++++++++++++-
 2 files changed, 39 insertions(+), 1 deletion(-)
tools/nfs-sysfs/nfs-sysfs.py +2 -0
index 90efcbed7ac8..dfad6ac08fa0 100755
@@ -11,8 +11,10 @@ parser.set_defaults(func=show_small_help)
 
 
 import switch
+import xprt
 subparser = parser.add_subparsers(title="commands")
 switch.add_command(subparser)
+xprt.add_command(subparser)
 
 
 args = parser.parse_args()
tools/nfs-sysfs/xprt.py +37 -1
index d37537771c1d..fbdd9bfc9375 100644
@@ -1,12 +1,48 @@
+import sysfs
+
 class Xprt:
     def __init__(self, path):
         self.path = path
         self.id = int(str(path).rsplit("-", 2)[1])
         self.type = str(path).rsplit("-", 2)[2]
         self.dstaddr = open(path / "dstaddr", 'r').readline().strip()
+        self.srcaddr = open(path / "srcaddr", 'r').readline().strip()
+
+        with open(path / "xprt_state") as f:
+            self.state = ','.join(f.readline().split()[1:])
+        self.__dict__.update(sysfs.read_info_file(path / "xprt_info"))
 
     def __lt__(self, rhs):
         return self.id < rhs.id
 
+    def __str__(self):
+        state = self.state
+        if self.main_xprt:
+            state = "MAIN," + self.state
+
+        line = "xprt %s: %s, %s, port %s, state <%s>" % \
+                (self.id, self.type, self.dstaddr, self.dst_port, state)
+        line += "\n	Source: %s, port %s, Requests: %s" % \
+                (self.srcaddr, self.src_port, self.num_reqs)
+        line += "\n	Congestion: cur %s, win %s, Slots: min %s, max %s" % \
+                (self.cur_cong, self.cong_win, self.min_num_slots, self.max_num_slots)
+        line += "\n	Queues: binding %s, sending %s, pending %s, backlog %s, tasks %s" % \
+                (self.binding_q_len, self.sending_q_len, self.pending_q_len, self.backlog_q_len, self.tasks_queuelen)
+        return line
+
     def small_str(self):
-        return "xprt %s: %s, %s" % (self.id, self.type, self.dstaddr)
+        return "xprt %s: %s, %s%s" % (self.id, self.type, self.dstaddr,
+                                     f" [main]" if self.main_xprt else "" )
+
+
+def list_xprts(args):
+    xprts = [ Xprt(f) for f in (sysfs.SUNRPC / "xprt-switches").glob("**/xprt-*") ]
+    xprts.sort()
+    for xprt in xprts:
+        if args.id == None or xprt.id == args.id[0]:
+            print(xprt)
+
+def add_command(subparser):
+    parser = subparser.add_parser("xprt", help="Commands for individual xprts")
+    parser.add_argument("--id", metavar="ID", nargs=1, type=int, help="Id of a specific xprt to show")
+    parser.set_defaults(func=list_xprts)
Signature · 1 line
2.32.0
#6 lore raw

PATCH v2 4/9 nfs-sysfs.py: Add a command for printing rpc-client information

In reply to [email protected]

From: Anna Schumaker <[email protected]>

It's mostly the same information as with xprt-switches, except with rpc-client id prepended to the first line.

---
 tools/nfs-sysfs/client.py    | 27 +++++++++++++++++++++++++++
 tools/nfs-sysfs/nfs-sysfs.py |  2 ++
 tools/nfs-sysfs/switch.py    |  7 ++++---
 3 files changed, 33 insertions(+), 3 deletions(-)
 create mode 100644 tools/nfs-sysfs/client.py
tools/nfs-sysfs/client.py new file +27 -0
new file mode 100644
index 000000000000..5192cc226aed
@@ -0,0 +1,27 @@
+import sysfs
+import switch
+
+class RpcClient:
+    def __init__(self, path):
+        self.path = path
+        self.id = int(str(path).rsplit("-", 1)[1])
+        self.switch = switch.XprtSwitch(path / (path / "switch").readlink(), sep=",")
+
+    def __lt__(self, rhs):
+        return self.id < rhs.id
+
+    def __str__(self):
+        return "client %s: %s" % (self.id, self.switch)
+
+
+def list_rpc_clients(args):
+    clients = [ RpcClient(f) for f in (sysfs.SUNRPC / "rpc-clients").iterdir() ]
+    clients.sort()
+    for client in clients:
+        if args.id == None or client.id == args.id[0]:
+            print(client)
+
+def add_command(subparser):
+    parser = subparser.add_parser("rpc-client", help="Commands for rpc clients")
+    parser.add_argument("--id", metavar="ID", nargs=1, type=int, help="Id of a specific client to show")
+    parser.set_defaults(func=list_rpc_clients)
tools/nfs-sysfs/nfs-sysfs.py +2 -0
index dfad6ac08fa0..e2172cdfa4c1 100755
@@ -10,9 +10,11 @@ def show_small_help(args):
 parser.set_defaults(func=show_small_help)
 
 
+import client
 import switch
 import xprt
 subparser = parser.add_subparsers(title="commands")
+client.add_command(subparser)
 switch.add_command(subparser)
 xprt.add_command(subparser)
 
tools/nfs-sysfs/switch.py +4 -3
index afb6963a0a1f..5384f970235c 100644
@@ -2,9 +2,10 @@ import sysfs
 import xprt
 
 class XprtSwitch:
-    def __init__(self, path):
+    def __init__(self, path, sep=":"):
         self.path = path
         self.id = int(str(path).rsplit("-", 1)[1])
+        self.sep = sep
 
         self.xprts = [ xprt.Xprt(p) for p in self.path.iterdir() if p.is_dir() ]
         self.xprts.sort()
@@ -15,8 +16,8 @@ class XprtSwitch:
         return self.path < rhs.path
 
     def __str__(self):
-        line = "switch %s: num_xprts %s, num_active %s, queue_len %s" % \
-                (self.id, self.num_xprts, self.num_active, self.queue_len)
+        line = "switch %s%s num_xprts %s, num_active %s, queue_len %s" % \
+                (self.id, self.sep, self.num_xprts, self.num_active, self.queue_len)
         for x in self.xprts:
             line += "\n	%s" % x.small_str()
         return line
Signature · 1 line
2.32.0
#7 lore raw

PATCH v2 5/9 nfs-sysfs.py: Add a command for changing xprt dstaddr

In reply to [email protected]

From: Anna Schumaker <[email protected]>

Using the socket module for dns resolution

---
 tools/nfs-sysfs/xprt.py | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)
tools/nfs-sysfs/xprt.py +28 -0
index fbdd9bfc9375..2160cb0a9575 100644
@@ -1,3 +1,4 @@
+import socket
 import sysfs
 
 class Xprt:
@@ -34,6 +35,12 @@ class Xprt:
         return "xprt %s: %s, %s%s" % (self.id, self.type, self.dstaddr,
                                      f" [main]" if self.main_xprt else "" )
 
+    def set_dstaddr(self, newaddr):
+        resolved = socket.gethostbyname(newaddr)
+        with open(self.path / "dstaddr", 'w') as f:
+            f.write(resolved)
+        self.dstaddr = open(self.path / "dstaddr", 'r').readline().strip()
+
 
 def list_xprts(args):
     xprts = [ Xprt(f) for f in (sysfs.SUNRPC / "xprt-switches").glob("**/xprt-*") ]
@@ -42,7 +49,28 @@ def list_xprts(args):
         if args.id == None or xprt.id == args.id[0]:
             print(xprt)
 
+def get_xprt(id):
+    xprts = [ Xprt(f) for f in (sysfs.SUNRPC / "xprt-switches").glob("**/xprt-*") ]
+    for xprt in xprts:
+        if xprt.id == id:
+            return xprt
+
+def set_xprt_property(args):
+    xprt = get_xprt(args.id[0])
+    try:
+        if args.dstaddr != None:
+            xprt.set_dstaddr(args.dstaddr[0])
+        print(xprt)
+    except Exception as e:
+        print(e)
+
 def add_command(subparser):
     parser = subparser.add_parser("xprt", help="Commands for individual xprts")
     parser.add_argument("--id", metavar="ID", nargs=1, type=int, help="Id of a specific xprt to show")
     parser.set_defaults(func=list_xprts)
+
+    subparser = parser.add_subparsers()
+    parser = subparser.add_parser("set", help="Set an xprt property")
+    parser.add_argument("--id", metavar="ID", nargs=1, type=int, required=True, help="Id of a specific xprt to modify")
+    parser.add_argument("--dstaddr", metavar="dstaddr", nargs=1, type=str, help="New dstaddr to set")
+    parser.set_defaults(func=set_xprt_property)
Signature · 1 line
2.32.0
#8 lore raw

PATCH v2 6/9 nfs-sysfs.py: Add a command for changing xprt-switch dstaddrs

In reply to [email protected]

From: Anna Schumaker <[email protected]>

This is basically the same as for xprts, but it iterates through all xprts attached to the switch to apply the new address.

---
 tools/nfs-sysfs/switch.py | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
tools/nfs-sysfs/switch.py +15 -0
index 5384f970235c..859b82e07895 100644
@@ -30,7 +30,22 @@ def list_xprt_switches(args):
         if args.id == None or xs.id == args.id[0]:
             print(xs)
 
+def set_xprt_switch_property(args):
+    switch = XprtSwitch(sysfs.SUNRPC / "xprt-switches" / f"switch-{args.id[0]}")
+    try:
+        for xprt in switch.xprts:
+            xprt.set_dstaddr(args.dstaddr[0])
+        print(switch)
+    except Exception as e:
+        print(e)
+
 def add_command(subparser):
     parser = subparser.add_parser("xprt-switch", help="Commands for xprt switches")
     parser.add_argument("--id", metavar="ID", nargs=1, type=int, help="Id of a specific xprt-switch to show")
     parser.set_defaults(func=list_xprt_switches)
+
+    subparser = parser.add_subparsers()
+    parser = subparser.add_parser("set", help="Set an xprt switch property")
+    parser.add_argument("--id", metavar="ID", nargs=1, type=int, required=True, help="Id of an xprt-switch to modify")
+    parser.add_argument("--dstaddr", metavar="dstaddr", nargs=1, type=str, help="New dstaddr to set")
+    parser.set_defaults(func=set_xprt_switch_property)
Signature · 1 line
2.32.0
#9 lore raw

PATCH v2 7/9 nfs-sysfs.py: Add a command for changing xprt state

In reply to [email protected]

From: Anna Schumaker <[email protected]>

We can set it offline or online, or we can remove an xprt. The kernel only supports removing offlined transports, so we make sure to set the state to "offline" before sending the remove command.

---
 tools/nfs-sysfs/xprt.py | 29 +++++++++++++++++++++++++++--
 1 file changed, 27 insertions(+), 2 deletions(-)
tools/nfs-sysfs/xprt.py +27 -2
index 2160cb0a9575..92b83ebc4cd1 100644
@@ -8,15 +8,18 @@ class Xprt:
         self.type = str(path).rsplit("-", 2)[2]
         self.dstaddr = open(path / "dstaddr", 'r').readline().strip()
         self.srcaddr = open(path / "srcaddr", 'r').readline().strip()
+        self.exists = True
 
-        with open(path / "xprt_state") as f:
-            self.state = ','.join(f.readline().split()[1:])
+        self.read_state()
         self.__dict__.update(sysfs.read_info_file(path / "xprt_info"))
 
     def __lt__(self, rhs):
         return self.id < rhs.id
 
     def __str__(self):
+        if self.exists == False:
+            return "xprt %s: has been removed" % self.id
+
         state = self.state
         if self.main_xprt:
             state = "MAIN," + self.state
@@ -31,6 +34,13 @@ class Xprt:
                 (self.binding_q_len, self.sending_q_len, self.pending_q_len, self.backlog_q_len, self.tasks_queuelen)
         return line
 
+    def read_state(self):
+        if not self.path.exists():
+            self.exists = False
+            return
+        with open(self.path / "xprt_state") as f:
+            self.state = ','.join(f.readline().split()[1:])
+
     def small_str(self):
         return "xprt %s: %s, %s%s" % (self.id, self.type, self.dstaddr,
                                      f" [main]" if self.main_xprt else "" )
@@ -41,6 +51,11 @@ class Xprt:
             f.write(resolved)
         self.dstaddr = open(self.path / "dstaddr", 'r').readline().strip()
 
+    def set_state(self, state):
+        with open(self.path / "xprt_state", 'w') as f:
+            f.write(state)
+        self.read_state()
+
 
 def list_xprts(args):
     xprts = [ Xprt(f) for f in (sysfs.SUNRPC / "xprt-switches").glob("**/xprt-*") ]
@@ -60,6 +75,13 @@ def set_xprt_property(args):
     try:
         if args.dstaddr != None:
             xprt.set_dstaddr(args.dstaddr[0])
+        if args.offline == True:
+            xprt.set_state("offline")
+        elif args.online == True:
+            xprt.set_state("online")
+        elif args.remove == True:
+            xprt.set_state("offline")
+            xprt.set_state("remove")
         print(xprt)
     except Exception as e:
         print(e)
@@ -73,4 +95,7 @@ def add_command(subparser):
     parser = subparser.add_parser("set", help="Set an xprt property")
     parser.add_argument("--id", metavar="ID", nargs=1, type=int, required=True, help="Id of a specific xprt to modify")
     parser.add_argument("--dstaddr", metavar="dstaddr", nargs=1, type=str, help="New dstaddr to set")
+    parser.add_argument("--offline", action="store_true", help="Set an xprt offline")
+    parser.add_argument("--online", action="store_true", help="Set an offline xprt back online")
+    parser.add_argument("--remove", action="store_true", help="Remove an xprt")
     parser.set_defaults(func=set_xprt_property)
Signature · 1 line
2.32.0
#10 lore raw

Re: [PATCH v2 7/9] nfs-sysfs.py: Add a command for changing xprt state

Hello Anna,

Comments are inline:

--Jorge

On 8/6/21, 2:17 PM, "Anna Schumaker on behalf of [email protected]" <[email protected] on behalf of [email protected]> wrote:

    NetApp Security WARNING: This is an external email. Do not click links or open attachments unless you recognize the sender and know the content is safe.




    From: Anna Schumaker <[email protected]>

    We can set it offline or online, or we can remove an xprt. The kernel
    only supports removing offlined transports, so we make sure to set the
    state to "offline" before sending the remove command.

    Signed-off-by: Anna Schumaker <[email protected]>
    ---
     tools/nfs-sysfs/xprt.py | 29 +++++++++++++++++++++++++++--
     1 file changed, 27 insertions(+), 2 deletions(-)

    diff --git a/tools/nfs-sysfs/xprt.py b/tools/nfs-sysfs/xprt.py
    index 2160cb0a9575..92b83ebc4cd1 100644
    --- a/tools/nfs-sysfs/xprt.py
    +++ b/tools/nfs-sysfs/xprt.py
    @@ -8,15 +8,18 @@ class Xprt:
             self.type = str(path).rsplit("-", 2)[2]
             self.dstaddr = open(path / "dstaddr", 'r').readline().strip()
             self.srcaddr = open(path / "srcaddr", 'r').readline().strip()
    +        self.exists = True

    -        with open(path / "xprt_state") as f:
    -            self.state = ','.join(f.readline().split()[1:])
    +        self.read_state()
             self.__dict__.update(sysfs.read_info_file(path / "xprt_info"))

         def __lt__(self, rhs):
             return self.id < rhs.id

         def __str__(self):

JM: Do not compare with True or False just use boolean as is:
if not self.exists:
+ if self.exists == False:
+ return "xprt %s: has been removed" % self.id
+
state = self.state
if self.main_xprt:
state = "MAIN," + self.state
@@ -31,6 +34,13 @@ class Xprt:
(self.binding_q_len, self.sending_q_len, self.pending_q_len, self.backlog_q_len, self.tasks_queuelen)
return line

+ def read_state(self):
+ if not self.path.exists():
+ self.exists = False
+ return
+ with open(self.path / "xprt_state") as f:
+ self.state = ','.join(f.readline().split()[1:])
+
def small_str(self):
return "xprt %s: %s, %s%s" % (self.id, self.type, self.dstaddr,
f" [main]" if self.main_xprt else "" )
@@ -41,6 +51,11 @@ class Xprt:
f.write(resolved)
self.dstaddr = open(self.path / "dstaddr", 'r').readline().strip()

+ def set_state(self, state):
+ with open(self.path / "xprt_state", 'w') as f:
+ f.write(state)
+ self.read_state()
+

def list_xprts(args):
xprts = [ Xprt(f) for f in (sysfs.SUNRPC / "xprt-switches").glob("**/xprt-*") ]
@@ -60,6 +75,13 @@ def set_xprt_property(args):
try:
if args.dstaddr != None:
xprt.set_dstaddr(args.dstaddr[0])
JM: Do not compare with True:
if args.offline:
elif args.online:
elif args.remove:
+ if args.offline == True:
+ xprt.set_state("offline")
+ elif args.online == True:
+ xprt.set_state("online")
+ elif args.remove == True:
+ xprt.set_state("offline")
+ xprt.set_state("remove")
print(xprt)
except Exception as e:
print(e)
@@ -73,4 +95,7 @@ def add_command(subparser):
parser = subparser.add_parser("set", help="Set an xprt property")
parser.add_argument("--id", metavar="ID", nargs=1, type=int, required=True, help="Id of a specific xprt to modify") parser.add_argument("--dstaddr", metavar="dstaddr", nargs=1, type=str, help="New dstaddr to set")
+ parser.add_argument("--offline", action="store_true", help="Set an xprt offline")
+ parser.add_argument("--online", action="store_true", help="Set an offline xprt back online")
+ parser.add_argument("--remove", action="store_true", help="Remove an xprt")
parser.set_defaults(func=set_xprt_property)
--
2.32.0

#11 lore raw

PATCH v2 8/9 nfs-sysfs: Add a man page

In reply to [email protected]

From: Anna Schumaker <[email protected]>

---
 tools/nfs-sysfs/nfs-sysfs.man | 88 +++++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)
 create mode 100644 tools/nfs-sysfs/nfs-sysfs.man
tools/nfs-sysfs/nfs-sysfs.man new file +88 -0
new file mode 100644
index 000000000000..3ebbeaf93eaa
@@ -0,0 +1,88 @@
+.\"
+.\" nfs-sysfs(8)
+.\"
+.TH nfs-sysfs 8 "05 Aug 2021"
+.SH NAME
+nfs-sysfs \- Displays NFS & SunRPC connection information
+.SH SYNOPSIS
+.B nfs-sysfs
+.RB [ \-h | \-\-help ]
+.P
+.B nfs-sysfs rpc-client
+.RB [ \-h | \-\-help ]
+.RB [ \--id
+.IR ID ]
+.P
+.B nfs-sysfs xprt-switch
+.RB [ \-h | \-\-help ]
+.RB [ \--id
+.IR ID ]
+.P
+.B nfs-sysfs xprt-switch set
+.RB [ \-h | \-\-help ]
+.RB [ \--id
+.IR ID ]
+.RB [ \--dstaddr
+.IR dstaddr]
+.P
+.B nfs-sysfs xprt
+.RB [ \-h | \-\-help ]
+.RB [ \--id
+.IR ID ]
+.P
+.B nfs-sysfs xprt set
+.RB [ \-h | \-\-help ]
+.RB [ \--id
+.IR ID ]
+.RB [ \--dstaddr
+.IR dstaddr]
+.RB [ --offline ]
+.RB [ --online ]
+.RB [ --remove ]
+.P
+.SH DESCRIPTION
+.RB "The " nfs-sysfs " command displays information collected in the SunRPC sysfs files about the system's SunRPC objects.
+.P
+.SS Objects
+Valid
+.BR nfs-sysfs (8)
+objects are:
+.IP "\fBrpc-client\fP"
+Display information about this system's RPC clients.
+.IP "\fBxprt-switch\fP"
+Display information about groups of transports.
+.IP "\fBxprt\fP"
+Display detailed information about each transport that exists on the system.
+.SH OPTIONS
+.SS Options valid for all objects
+.TP
+.B \-h, \-\-help
+Show the help message and exit
+.TP
+.B \-\-id \fIID
+Set or display properties for the object with the given
+.IR ID.
+This option is mandatory for setting properties.
+.SS Options specific to the `xprt-switch set` sub-command
+.TP
+.B \-\-dstaddr \fIdstaddr
+Change the destination address of all transports in the xprt-switch to
+.IR dstaddr
+.SS Options specific to the `xprt set` sub-command
+.TP
+.B \-\-dstaddr \fIdstaddr
+Change the destination address of this specific transport to
+.TP
+.B \-\-offline
+Change the transport state from online to offline
+.TP
+.B \-\-online
+Change the transport state from offline to online
+.TP
+.B \-\-remove
+Removes the transport from the xprt-switch. Note that "main" transports cannot be removed.
+.SH DIRECTORY
+.TP
+.B /sys/kernel/sunrpc/
+.SH AUTHOR
+Anna Schumaker <[email protected]>
Signature · 1 line
2.32.0
#12 lore raw

PATCH v2 9/9 nfs-sysfs: Add installation to the Makefile

In reply to [email protected]

From: Anna Schumaker <[email protected]>

And create a shell script that launches the python program from the $(libdir)

---
 configure.ac                |  1 +
 tools/Makefile.am           |  2 +-
 tools/nfs-sysfs/Makefile.am | 20 ++++++++++++++++++++
 tools/nfs-sysfs/nfs-sysfs   |  5 +++++
 4 files changed, 27 insertions(+), 1 deletion(-)
 create mode 100644 tools/nfs-sysfs/Makefile.am
 create mode 100644 tools/nfs-sysfs/nfs-sysfs
configure.ac +1 -0
index bc2d0f02979c..092e230551f2 100644
@@ -731,6 +731,7 @@ AC_CONFIG_FILES([
 	tools/rpcgen/Makefile
 	tools/mountstats/Makefile
 	tools/nfs-iostat/Makefile
+	tools/nfs-sysfs/Makefile
 	tools/nfsdclnts/Makefile
 	tools/nfsconf/Makefile
 	tools/nfsdclddb/Makefile
tools/Makefile.am +1 -1
index 9b4b0803db39..1c89d66be744 100644
@@ -12,6 +12,6 @@ if CONFIG_NFSDCLD
 OPTDIRS += nfsdclddb
 endif
 
-SUBDIRS = locktest rpcdebug nlmtest mountstats nfs-iostat nfsdclnts $(OPTDIRS)
+SUBDIRS = locktest rpcdebug nlmtest mountstats nfs-iostat nfs-sysfs nfsdclnts $(OPTDIRS)
 
 MAINTAINERCLEANFILES = Makefile.in
tools/nfs-sysfs/Makefile.am new file +20 -0
new file mode 100644
index 000000000000..bdfc7454a7a1
@@ -0,0 +1,20 @@
+## Process this file with automake to produce Makefile.in
+PYTHON_FILES =  nfs-sysfs.py client.py switch.py sysfs.py xprt.py
+tooldir = $(DESTDIR)$(libdir)/nfs-sysfs
+
+man8_MANS = nfs-sysfs.man
+
+all-local: $(PYTHON_FILES)
+
+install-data-hook:
+	mkdir -p $(tooldir)
+	for f in $(PYTHON_FILES) ; do \
+		$(INSTALL) -m 644 $$f $(tooldir)/$$f ; \
+	done
+	chmod +x $(tooldir)/nfs-sysfs.py
+	$(INSTALL) -m 755 nfs-sysfs $(DESTDIR)$(sbindir)/nfs-sysfs
+	sed -i "s|LIBDIR=.|LIBDIR=$(tooldir)|" $(DESTDIR)$(sbindir)/nfs-sysfs
+
+
+
+MAINTAINERCLEANFILES=Makefile.in
tools/nfs-sysfs/nfs-sysfs new file +5 -0
new file mode 100644
index 000000000000..f7ce621eff57
@@ -0,0 +1,5 @@
+#!/bin/bash
+LIBDIR=.
+PYTHON3=/usr/bin/python
+
+exec $PYTHON3 $LIBDIR/nfs-sysfs.py $*
Signature · 1 line
2.32.0
#13 lore raw
In reply to [email protected]

Hey Anna,

Quoted 86 lines · On 8/6/21 4:17 PM, [email protected] wrote:

From: Anna Schumaker <[email protected]>

These patches implement a tool that can be used to read and write the sysfs files, with subcommands! They do need my extra patches to add in srcaddr and dst_port to the xprt_info file. Let me know if I need to resend adding support for kernels both with and without these patches.

The following subcommands are implemented:
nfs-sysfs.py rpc-client
nfs-sysfs.py xprt
nfs-sysfs.py xprt set
nfs-sysfs.py xprt-switch
nfs-sysfs.py xprt-switch set

So you can print out information about every xprt-switch with:
anna@client ~ % nfs-sysfs xprt-switch
switch 0: num_xprts 1, num_active 1, queue_len 0
xprt 0: local, /var/run/gssproxy.sock [main]
switch 1: num_xprts 1, num_active 1, queue_len 0
xprt 1: local, /var/run/rpcbind.sock [main]
switch 2: num_xprts 1, num_active 1, queue_len 0
xprt 2: tcp, 192.168.111.1 [main]
switch 3: num_xprts 4, num_active 4, queue_len 0
xprt 3: tcp, 192.168.111.188 [main] xprt 4: tcp, 192.168.111.188
xprt 5: tcp, 192.168.111.188
xprt 6: tcp, 192.168.111.188

And information about each xprt:

	anna@client ~ % nfs-sysfs xprt
	xprt 0: local, /var/run/gssproxy.sock, port 0, state <MAIN,CONNECTED,BOUND>
		Source: (einval), port 0, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
	xprt 1: local, /var/run/rpcbind.sock, port 0, state <MAIN,CONNECTED,BOUND>
		Source: (einval), port 0, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
	xprt 2: tcp, 192.168.111.1, port 2049, state <MAIN,CONNECTED,BOUND>
		Source: 192.168.111.222, port 959, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
	xprt 3: tcp, 192.168.111.188, port 2049, state <MAIN,CONNECTED,BOUND>
		Source: 192.168.111.222, port 921, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
	xprt 4: tcp, 192.168.111.188, port 2049, state <CONNECTED,BOUND>
		Source: 192.168.111.222, port 726, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
	xprt 5: tcp, 192.168.111.188, port 2049, state <CONNECTED,BOUND>
		Source: 192.168.111.222, port 671, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
	xprt 6: tcp, 192.168.111.188, port 2049, state <CONNECTED,BOUND>
		Source: 192.168.111.222, port 934, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0

You can use the set subcommand to change the dstaddr of individual xprts:

	anna@client ~ % sudo nfs-sysfs xprt --id 4
	xprt 4: tcp, 192.168.111.188, port 2049, state <CONNECTED,BOUND>
		Source: 192.168.111.222, port 726, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
	anna@client ~ % sudo nfs-sysfs xprt set --id 4 --dstaddr server2.nowheycreamery.com
	xprt 4: tcp, 192.168.111.186, port 2049, state <CONNECTED,BOUND>
		Source: 192.168.111.222, port 726, Requests: 2
		Congestion: cur 0, win 256, Slots: min 2, max 65536
		Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0

Or for changing the dstaddr of all xprts attached to a switch:

	anna@client % ./nfs-sysfs.py xprt-switch --id 3
	switch 3: num_xprts 4, num_active 4, queue_len 0
		xprt 3: tcp, 192.168.111.188 [main]
		xprt 4: tcp, 192.168.111.188
		xprt 5: tcp, 192.168.111.188
		xprt 6: tcp, 192.168.111.188
	anna@client % sudo ./nfs-sysfs.py xprt-switch set --id 4 --dstaddr server2.nowheycreamery.vm
	switch 3: num_xprts 4, num_active 4, queue_len 0
		xprt 2: tcp, 192.168.111.186 [main]
		xprt 3: tcp, 192.168.111.186
		xprt 5: tcp, 192.168.111.186
		xprt 6: tcp, 192.168.111.186
Quoted 3 lines

What does everybody think? Is there any thing I should change about the user input or output lines? How about other subcommands that should be added with the initial submission?

I have not play around with this new tool.. but I will! Looking forward to it... But... and I should have mention this in v1 my apologies.

The rest of the NFS tools do not have have "nfs-" as the prefix only an "nfs"... As with nfs-iostat, I'll me more that will to take the patch with the '-' char, but I would prefer the man page and the installed script be call nfssysfs, just to say with the current naming conventions.

steved.

Quoted 37 lines

Thanks,
Anna

Anna Schumaker (9):
nfs-sysfs: Add an nfs-sysfs.py tool
nfs-sysfs.py: Add a command for printing xprt switch information nfs-sysfs.py: Add a command for printing individual xprts nfs-sysfs.py: Add a command for printing rpc-client information nfs-sysfs.py: Add a command for changing xprt dstaddr nfs-sysfs.py: Add a command for changing xprt-switch dstaddrs nfs-sysfs.py: Add a command for changing xprt state
nfs-sysfs: Add a man page
nfs-sysfs: Add installation to the Makefile

  .gitignore                    |   2 +
  configure.ac                  |   1 +
  tools/Makefile.am             |   2 +-
  tools/nfs-sysfs/Makefile.am   |  20 +++++++
  tools/nfs-sysfs/client.py     |  27 +++++++++
  tools/nfs-sysfs/nfs-sysfs     |   5 ++
  tools/nfs-sysfs/nfs-sysfs.man |  88 +++++++++++++++++++++++++++++
  tools/nfs-sysfs/nfs-sysfs.py  |  23 ++++++++
  tools/nfs-sysfs/switch.py     |  51 +++++++++++++++++
  tools/nfs-sysfs/sysfs.py      |  28 ++++++++++
  tools/nfs-sysfs/xprt.py       | 101 ++++++++++++++++++++++++++++++++++
  11 files changed, 347 insertions(+), 1 deletion(-)

create mode 100644 tools/nfs-sysfs/Makefile.am create mode 100644 tools/nfs-sysfs/client.py create mode 100644 tools/nfs-sysfs/nfs-sysfs create mode 100644 tools/nfs-sysfs/nfs-sysfs.man create mode 100755 tools/nfs-sysfs/nfs-sysfs.py create mode 100644 tools/nfs-sysfs/switch.py create mode 100644 tools/nfs-sysfs/sysfs.py create mode 100644 tools/nfs-sysfs/xprt.py

#14 lore raw

Hi Steve,

Quoted 97 lines · Steve Dickson

Hey Anna,

Quoted 86 lines · On 8/6/21 4:17 PM, [email protected] wrote:

From: Anna Schumaker <[email protected]>

These patches implement a tool that can be used to read and write the sysfs files, with subcommands! They do need my extra patches to add in srcaddr and dst_port to the xprt_info file. Let me know if I need to resend adding support for kernels both with and without these patches.

The following subcommands are implemented:
nfs-sysfs.py rpc-client
nfs-sysfs.py xprt
nfs-sysfs.py xprt set
nfs-sysfs.py xprt-switch
nfs-sysfs.py xprt-switch set

So you can print out information about every xprt-switch with:
anna@client ~ % nfs-sysfs xprt-switch
switch 0: num_xprts 1, num_active 1, queue_len 0
xprt 0: local, /var/run/gssproxy.sock [main]
switch 1: num_xprts 1, num_active 1, queue_len 0
xprt 1: local, /var/run/rpcbind.sock [main]
switch 2: num_xprts 1, num_active 1, queue_len 0
xprt 2: tcp, 192.168.111.1 [main]
switch 3: num_xprts 4, num_active 4, queue_len 0
xprt 3: tcp, 192.168.111.188 [main] xprt 4: tcp, 192.168.111.188
xprt 5: tcp, 192.168.111.188
xprt 6: tcp, 192.168.111.188

And information about each xprt:

      anna@client ~ % nfs-sysfs xprt
      xprt 0: local, /var/run/gssproxy.sock, port 0, state <MAIN,CONNECTED,BOUND>
              Source: (einval), port 0, Requests: 2
              Congestion: cur 0, win 256, Slots: min 2, max 65536
              Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
      xprt 1: local, /var/run/rpcbind.sock, port 0, state <MAIN,CONNECTED,BOUND>
              Source: (einval), port 0, Requests: 2
              Congestion: cur 0, win 256, Slots: min 2, max 65536
              Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
      xprt 2: tcp, 192.168.111.1, port 2049, state <MAIN,CONNECTED,BOUND>
              Source: 192.168.111.222, port 959, Requests: 2
              Congestion: cur 0, win 256, Slots: min 2, max 65536
              Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
      xprt 3: tcp, 192.168.111.188, port 2049, state <MAIN,CONNECTED,BOUND>
              Source: 192.168.111.222, port 921, Requests: 2
              Congestion: cur 0, win 256, Slots: min 2, max 65536
              Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
      xprt 4: tcp, 192.168.111.188, port 2049, state <CONNECTED,BOUND>
              Source: 192.168.111.222, port 726, Requests: 2
              Congestion: cur 0, win 256, Slots: min 2, max 65536
              Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
      xprt 5: tcp, 192.168.111.188, port 2049, state <CONNECTED,BOUND>
              Source: 192.168.111.222, port 671, Requests: 2
              Congestion: cur 0, win 256, Slots: min 2, max 65536
              Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
      xprt 6: tcp, 192.168.111.188, port 2049, state <CONNECTED,BOUND>
              Source: 192.168.111.222, port 934, Requests: 2
              Congestion: cur 0, win 256, Slots: min 2, max 65536
              Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0

You can use the set subcommand to change the dstaddr of individual xprts:

      anna@client ~ % sudo nfs-sysfs xprt --id 4
      xprt 4: tcp, 192.168.111.188, port 2049, state <CONNECTED,BOUND>
              Source: 192.168.111.222, port 726, Requests: 2
              Congestion: cur 0, win 256, Slots: min 2, max 65536
              Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0
      anna@client ~ % sudo nfs-sysfs xprt set --id 4 --dstaddr server2.nowheycreamery.com
      xprt 4: tcp, 192.168.111.186, port 2049, state <CONNECTED,BOUND>
              Source: 192.168.111.222, port 726, Requests: 2
              Congestion: cur 0, win 256, Slots: min 2, max 65536
              Queues: binding 0, sending 0, pending 0, backlog 0, tasks 0

Or for changing the dstaddr of all xprts attached to a switch:

      anna@client % ./nfs-sysfs.py xprt-switch --id 3
      switch 3: num_xprts 4, num_active 4, queue_len 0
              xprt 3: tcp, 192.168.111.188 [main]
              xprt 4: tcp, 192.168.111.188
              xprt 5: tcp, 192.168.111.188
              xprt 6: tcp, 192.168.111.188
      anna@client % sudo ./nfs-sysfs.py xprt-switch set --id 4 --dstaddr server2.nowheycreamery.vm
      switch 3: num_xprts 4, num_active 4, queue_len 0
              xprt 2: tcp, 192.168.111.186 [main]
              xprt 3: tcp, 192.168.111.186
              xprt 5: tcp, 192.168.111.186
              xprt 6: tcp, 192.168.111.186
Quoted 3 lines

What does everybody think? Is there any thing I should change about the user input or output lines? How about other subcommands that should be added with the initial submission?

I have not play around with this new tool.. but I will! Looking forward to it... But... and I should have mention this in v1 my apologies.

Quoted 5 lines

The rest of the NFS tools do not have have "nfs-" as the prefix only an "nfs"... As with nfs-iostat, I'll me more that will to take the patch with the '-' char, but I would prefer the man page and the installed script be call nfssysfs, just to say with the current naming conventions.

No problem! Changing the name of the tool should be easy enough. I'm not committed to the name either, so if anybody has a better name in mind please let me know!

Anna

Quoted 41 lines

steved.

Quoted 37 lines

Thanks,
Anna

Anna Schumaker (9):
nfs-sysfs: Add an nfs-sysfs.py tool
nfs-sysfs.py: Add a command for printing xprt switch information nfs-sysfs.py: Add a command for printing individual xprts nfs-sysfs.py: Add a command for printing rpc-client information nfs-sysfs.py: Add a command for changing xprt dstaddr nfs-sysfs.py: Add a command for changing xprt-switch dstaddrs nfs-sysfs.py: Add a command for changing xprt state
nfs-sysfs: Add a man page
nfs-sysfs: Add installation to the Makefile

  .gitignore                    |   2 +
  configure.ac                  |   1 +
  tools/Makefile.am             |   2 +-
  tools/nfs-sysfs/Makefile.am   |  20 +++++++
  tools/nfs-sysfs/client.py     |  27 +++++++++
  tools/nfs-sysfs/nfs-sysfs     |   5 ++
  tools/nfs-sysfs/nfs-sysfs.man |  88 +++++++++++++++++++++++++++++
  tools/nfs-sysfs/nfs-sysfs.py  |  23 ++++++++
  tools/nfs-sysfs/switch.py     |  51 +++++++++++++++++
  tools/nfs-sysfs/sysfs.py      |  28 ++++++++++
  tools/nfs-sysfs/xprt.py       | 101 ++++++++++++++++++++++++++++++++++
  11 files changed, 347 insertions(+), 1 deletion(-)

create mode 100644 tools/nfs-sysfs/Makefile.am create mode 100644 tools/nfs-sysfs/client.py create mode 100644 tools/nfs-sysfs/nfs-sysfs create mode 100644 tools/nfs-sysfs/nfs-sysfs.man create mode 100755 tools/nfs-sysfs/nfs-sysfs.py create mode 100644 tools/nfs-sysfs/switch.py create mode 100644 tools/nfs-sysfs/sysfs.py create mode 100644 tools/nfs-sysfs/xprt.py