Skip to content

at803x fiber/SFP support

Robert Hancock netdev 4 versions – Applied

Status from this message: This series was applied to netdev/net-next.git (master)

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest3 patches 3 repliesApplied 3/3
  2. v33 patches 1 replySuperseded
  3. v23 patches 7 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v12 patches2 repliesSuperseded

Changes in v4 from the cover letter

-Renamed some constants with OHM suffix for clarity

Patches in v4 All 3 applied

#Subject and filesSizeRepliesApplied
1/3net: phy: at803x: move page selection fix to config_initdrivers/net/phy/at803x.c+16 -240 repliesApplied
2/3net: phy: at803x: add fiber supportdrivers/net/phy/at803x.c+67 -90 repliesApplied
3/3net: phy: at803x: Support downstream SFP cagedrivers/net/phy/at803x.c+56 -00 repliesApplied

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v4 yet.

Read the v4 thread

Cover letter [PATCH net-next v4 0/3] at803x fiber/SFP support

Add support for 1000Base-X fiber modes to the at803x PHY driver, as well as support for connecting a downstream SFP cage.

Changes since v3:
-Renamed some constants with OHM suffix for clarity

Changes since v2:
-fixed tabs/spaces issue in one patch

Changes since v1:
-moved page selection to config_init so it is handled properly after suspend/resume
-added explicit check for empty sfp_support bitmask

Robert Hancock (3):
net: phy: at803x: move page selection fix to config_init
net: phy: at803x: add fiber support
net: phy: at803x: Support downstream SFP cage

 drivers/net/phy/at803x.c | 146 +++++++++++++++++++++++++++++++++------
 1 file changed, 126 insertions(+), 20 deletions(-)
Signature · 1 line
2.31.1