Skip to content

rockchip: board: Fix bug for clk driver for OGA

Chris Morgan u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest2 patches 2 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2rockchip: px30: add support for setting cpll clockdrivers/clk/rockchip/clk_px30.c+3 -01 reply
2/2rockchip: board: remove SCLK_GPU from U-Boot DTarch/arm/dts/rk3326-odroid-go2-u-boot.dtsi+10 -01 reply

Reviews trailers per patch

All 2 patches have a Reviewed-by or Acked-by.

PatchKever Yang
1/2R-b
2/2R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/2] rockchip: board: Fix bug for clk driver for OGA

From: Chris Morgan <[email protected]>

This series is to fix a problem with probing the clk_px30 driver that began with commit 92f1e9a4b31c ("clk: Detect failure to set defaults"). The driver fails to probe because 2 clocks are unsupported. One clock (the cpll) was simple to add to the driver and the other clock (the GPU) is not used in U-Boot so was removed from the U-Boot specific device tree. With these changes the clk driver probes again successfully. Note that without this fix no devices that depend on the clk driver are able to probe as well (such as the SD card, the SPI bus, etc) so the device fails to boot.

Chris Morgan (2):
rockchip: px30: add support for setting cpll clock
rockchip: board: remove SCLK_GPU from U-Boot DT

 arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi | 10 ++++++++++
 drivers/clk/rockchip/clk_px30.c            |  3 +++
 2 files changed, 13 insertions(+)
Signature · 1 line
2.25.1