Skip to content

i2c: piix4: Replace cd6h/cd7h port I/O accesses with MMIO accesses

Terry Bowman linux-i2c linux-watchdog lkml 7 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v5 Latest posting 2/29 patches 8 repliesIn review
  2. v5 posting 1/24 patches 4 repliesSuperseded
  3. v4 posting 2/24 patches 9 repliesSuperseded
Earlier versions · 4
VersionPostedPatchesRepliesStatus
v4 posting 1/29 patches17 repliesSuperseded
v39 patches11 repliesSuperseded
v28 patches0 repliesSuperseded
v11 patch0 repliesSuperseded

Changes in v5 from the cover letter

- Use request/release helper function for sb800 device in piix4_setup_sb800(). Patch 3. (Jean Delvare)
- Revert 'piix4_smba' variable definition ordering back as it was in piix4_setup_sb800(). Patch 4. (Jean Delvare)
- Add newline after piix4_sb800_port_sel(). Patch 5. (Jean Delvare)
- Remove unnecessary initialization in piix4_add_adapter(). Patch 6. (Jean Delvare)
- Remove unnecessary #define AMD_PCI_SMBUS_REVISION_MMIO. Patch 9. (Jean Delvare)
- Add description for 0x51 constant moved in the above item. This is in piix4_sb800_use_mmio(). Patch 9. (Andy Shevchenko)
- Rebase to v5.17-rc2. (Andy Shevchenko)
- Update patch 9 description. (Terry Bowman)

Patches in v5 posting 2/2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/9kernel/resource: Introduce request_mem_region_muxed()include/linux/ioport.h+2 -00 replies
2/9i2c: piix4: Replace hardcoded memory map size with a #definedrivers/i2c/busses/i2c-piix4.c+10 -60 replies
3/9i2c: piix4: Move port I/O region request/release code into functionsdrivers/i2c/busses/i2c-piix4.c+31 -176 replies
4/9i2c: piix4: Move SMBus controller base address detect into functiondrivers/i2c/busses/i2c-piix4.c+44 -250 replies
5/9i2c: piix4: Move SMBus port selection into functiondrivers/i2c/busses/i2c-piix4.c+17 -100 replies
6/9i2c: piix4: Add EFCH MMIO support to region request and releasedrivers/i2c/busses/i2c-piix4.c+59 -90 replies
7/9i2c: piix4: Add EFCH MMIO support to SMBus base address detectdrivers/i2c/busses/i2c-piix4.c+9 -40 replies
8/9i2c: piix4: Add EFCH MMIO support for SMBus port selectdrivers/i2c/busses/i2c-piix4.c+12 -30 replies
9/9i2c: piix4: Enable EFCH MMIO for Family 17h+drivers/i2c/busses/i2c-piix4.c+15 -20 replies

Reviews trailers per patch

All 9 patches have a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchAndy ShevchenkoJean Delvare
SeriesR-b T-b
1/9R-b
2/9R-b R-b
3/9R-b R-b
4/9R-b R-b
5/9R-b R-b
6/9R-b R-b
7/9R-b R-b
8/9R-b R-b
9/9R-b R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v5 thread

Cover letter [PATCH v5 0/9] i2c: piix4: Replace cd6h/cd7h port I/O accesses with MMIO accesses

This series changes the piix4_smbus driver's cd6h/cd7h port I/O accesses to use MMIO instead. This is necessary because cd6h/cd7h port I/O may be disabled on later AMD processors.

This series includes patches with MMIO accesses to register FCH::PM::DECODEEN. The same register is also accessed by the sp5100_tco driver.[1] Synchronization to the MMIO register is required in both drivers.

The first patch creates a macro to request MMIO region using the 'muxed' retry logic. This is used in patch 6 to synchronize accesses to EFCH MMIO.

The second patch replaces a hardcoded region size with a #define. This is to improve maintainability and was requested from v2 review.

The third patch moves duplicated region request/release code into functions. This locates related code into functions and reduces code line count. This will also make adding MMIO support in patch 6 easier.

The fourth patch moves SMBus controller address detection into a function. This is in preparation for adding MMIO region support.

The fifth patch moves EFCH port selection into a function. This is in preparation for adding MMIO region support.

The sixth patch adds MMIO support for region requesting/releasing and mapping. This is necessary for using MMIO to detect SMBus controller address, enable SMBbus controller region, and control the port select.

The seventh patch updates the SMBus controller address detection to support using MMIO. This is necessary because the driver accesses register FCH::PM::DECODEEN during initialization and only available using MMIO on later AMD processors.

The eighth patch updates the SMBus port selection to support MMIO. This is required because port selection control resides in the FCH::PM::DECODEEN[smbus0sel] and is only accessible using MMIO on later AMD processors.

The ninth patch enables the EFCH MMIO functionality added earlier in this series. The SMBus controller's PCI revision ID is used to check if EFCH MMIO is supported by HW and should be enabled in the driver.

Based on v5.17-rc2.

Testing:
Tested on family 19h using:
i2cdetect -y 0
i2cdetect -y 2

- Results using v5.16 and this pachset applied. Below

    shows the devices detected on the busses:
    
    # i2cdetect -y 0 
         0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
    00:                         -- -- -- -- -- -- -- -- 
    10: 10 11 -- -- -- -- -- -- 18 -- -- -- -- -- -- -- 
    20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
    30: 30 -- -- -- -- 35 36 -- -- -- -- -- -- -- -- -- 
    40: -- -- -- -- -- -- -- -- -- -- 4a -- -- -- -- -- 
    50: 50 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
    60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
    70: -- -- -- 73 -- -- -- --                         
    # i2cdetect -y 2
         0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
    00:                         -- -- -- -- -- -- -- -- 
    10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
    20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
    30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
    40: -- -- -- -- -- -- -- -- -- -- -- -- 4c -- -- -- 
    50: -- 51 -- -- 54 -- -- -- -- -- -- -- -- -- -- -- 
    60: 60 -- -- 63 -- -- 66 -- -- -- -- 6b -- -- 6e -- 
    70: 70 71 72 73 74 75 -- 77

Also tested using sp5100_tco submitted series listed below.[1] I applied the sp5100_tco v4 series and ran:
cat >> /dev/watchdog

[1] sp5100_tco v4 patchset can be found here:

Changes in v5:
- Use request/release helper function for sb800 device in piix4_setup_sb800(). Patch 3. (Jean Delvare)
- Revert 'piix4_smba' variable definition ordering back as it was in piix4_setup_sb800(). Patch 4. (Jean Delvare)
- Add newline after piix4_sb800_port_sel(). Patch 5. (Jean Delvare)
- Remove unnecessary initialization in piix4_add_adapter(). Patch 6. (Jean Delvare)
- Remove unnecessary #define AMD_PCI_SMBUS_REVISION_MMIO. Patch 9. (Jean Delvare)
- Add description for 0x51 constant moved in the above item. This is in piix4_sb800_use_mmio(). Patch 9. (Andy Shevchenko)
- Rebase to v5.17-rc2. (Andy Shevchenko)
- Update patch 9 description. (Terry Bowman)

Changes in v4:
- Changed request_muxed_mem_region() macro to request_mem_region_muxed() in patch 1. (Andy Shevchenko)
- Removed unnecessary newline where possible in calls to request_muxed_region() in patch 2. (Terry Bowman)
- Changed piix4_sb800_region_setup() to piix4_sb800_region_request(). Patch 3. (Jean Delvare)
- Reordered piix4_setup_sb800() local variables from longest name length to shortest name length. Patch 4. (Terry Bowman)
- Changed piix4_sb800_region_request() and piix4_sb800_region_release() by adding early return() to remove 'else' improving readability. Patch 6. (Terry Bowman)
- Removed iowrite32(ioread32(...), ...). Unnecessary because MMIO is already enabled. (Terry Bowman)
- Refactored piix4_sb800_port_sel() to simplify the 'if' statement using temp variable. Patch 8. (Terry Bowman)
- Added mmio_cfg.use_mmio assignment in piix4_add_adapter(). This is needed for calls to piix4_sb800_port_sel() after initialization during normal operation. Patch 9. (Terry Bowman)

Changes in v3:
- Added request_muxed_mem_region() patch (Wolfram, Guenter)
- Reduced To/Cc list length. (Andy)

Changes in v2:
- Split single patch. (Jean Delvare)
- Replace constant 2 with SB800_PIIX4_SMB_MAP_SIZE where appropriate. (Jean Delvare)
- Shorten SB800_PIIX4_FCH_PM_DECODEEN_MMIO_EN name length to SB800_PIIX4_FCH_PM_DECODEEN_MMIO. (Jean Delvare)
- Change AMD_PCI_SMBUS_REVISION_MMIO from 0x59 to 0x51. (Terry Bowman)
- Change piix4_sb800_region_setup() to piix4_sb800_region_request(). (Jean Delvare)
- Change 'SMB' text in logging to 'SMBus' (Jean Delvare)
- Remove unnecessary NULL assignment in piix4_sb800_region_release(). (Jean Delvare)
- Move 'u8' variable definitions to single line. (Jean Delvare)
- Hardcode piix4_setup_sb800_smba() return value to 0 since it is always
0. (Jean Delvare)

Terry Bowman (9):
kernel/resource: Introduce request_mem_region_muxed()
i2c: piix4: Replace hardcoded memory map size with a #define
i2c: piix4: Move port I/O region request/release code into functions
i2c: piix4: Move SMBus controller base address detect into function
i2c: piix4: Move SMBus port selection into function
i2c: piix4: Add EFCH MMIO support to region request and release
i2c: piix4: Add EFCH MMIO support to SMBus base address detect
i2c: piix4: Add EFCH MMIO support for SMBus port select
i2c: piix4: Enable EFCH MMIO for Family 17h+

 drivers/i2c/busses/i2c-piix4.c | 213 ++++++++++++++++++++++++++-------
 include/linux/ioport.h         |   2 +
 2 files changed, 169 insertions(+), 46 deletions(-)
Signature · 1 line
2.30.2