Skip to content

MSG_ZEROCOPY + multifd

Leonardo Bras qemu-devel 10 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v13 Latest8 patches 20 repliesIn review
  2. v127 patches 2 repliesSuperseded
  3. v117 patches 8 repliesSuperseded
Earlier versions · 7
VersionPostedPatchesRepliesStatus
v107 patches11 repliesSuperseded
v97 patches9 repliesSuperseded
v85 patches18 repliesSuperseded
v75 patches34 repliesSuperseded
v66 patches1 replySuperseded
v56 patches38 repliesSuperseded
v43 patches31 repliesSuperseded

Changes in v13 from the cover letter

- New patch #1 added to solve an issue with Gitlab CI on alpine
- Removed unnecessary newline in patch #3 (previously #2)
- Removed incorrect commit change in roms/skiboot on patch #4 (previously #3)

Patches in v13 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/8meson.build: Fix docker-test-build@alpine when including linux/errqueue.hmeson.build+11 -06 replies
2/8QIOChannel: Add flags on io_writev and introduce io_flush callbackchardev/char-io.c hw/remote/mpqemu-link.c include/io/channel.h +10 more+88 -140 replies
3/8QIOChannelSocket: Implement io_writev zero copy flag & io_flush for CONFIG_LINUXinclude/io/channel-socket.h io/channel-socket.c+114 -414 replies
4/8migration: Add zero-copy-send parameter for QMP/HMP for Linuxmigration/migration.c migration/migration.h migration/socket.c +2 more+76 -20 replies
5/8migration: Add migrate_use_tls() helpermigration/channel.c migration/migration.c migration/migration.h +1 more+12 -60 replies
6/8multifd: multifd_send_sync_main now returns negative on errormigration/multifd.c migration/multifd.h migration/ram.c+29 -120 replies
7/8multifd: Send header packet without flags if zero-copy-send is enabledmigration/multifd.c+19 -30 replies
8/8multifd: Implement zero copy write in multifd migration (multifd-zero-copy)migration/migration.c migration/multifd.c migration/multifd.h +1 more+50 -50 replies

Reviews trailers per patch

All 8 patches have a Reviewed-by or Acked-by.

PatchJuan QuintelaPeter XuDaniel P. BerrangéMarkus ArmbrusterDr. David Alan Gilbert
1/8R-b
2/8R-b R-b R-b
3/8R-b R-b R-b
4/8R-b R-b R-b A-b
5/8R-b R-b R-b
6/8R-b R-b
7/8R-b R-b
8/8R-b R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes. Scroll the table sideways for all 5 reviewers.

Read the v13 thread

Cover letter [PATCH v13 0/8] MSG_ZEROCOPY + multifd

This patch series intends to enable MSG_ZEROCOPY in QIOChannel, and make use of it for multifd migration performance improvement, by reducing cpu usage.

Patch #1 conditionally disables liburing in systems where linux/errqueue.h conflict with liburing/compat.h (__kernel_timespec redefine)

Patch #2 creates new callbacks for QIOChannel, allowing the implementation of zero copy writing.

Patch #3 implements io_writev flags and io_flush() on QIOChannelSocket, making use of MSG_ZEROCOPY on Linux.

Patch #4 adds a "zero_copy_send" migration property, only available with CONFIG_LINUX, and compiled-out in any other architectures. This migration property has to be enabled before multifd migration starts.

Patch #5 adds a helper function that allows to see if TLS is going to be used. This helper will be later used in patch #5.

Patch #6 changes multifd_send_sync_main() so it returns int instead of void. The return value is used to understand if any error happened in the function, allowing migration to possible fail earlier.

Patch #7 implements an workaround: The behavior introduced in d48c3a0445 is hard to deal with in zerocopy, so a workaround is introduced to send the header in a different syscall, without MSG_ZEROCOPY.

Patch #8 Makes use of QIOChannelSocket zero_copy implementation on nocomp multifd migration.

Results:
In preliminary tests, the resource usage of __sys_sendmsg() reduced 15 times, and the overall migration took 13-22% less time, based in synthetic cpu workload.

In further tests, it was noted that, on multifd migration with 8 channels:
- On idle hosts, migration time reduced in 10% to 21%.
- On hosts busy with heavy cpu stress (1 stress thread per cpu, but not cpu-pinned) migration time reduced in ~25% by enabling zero-copy.
- On hosts with heavy cpu-pinned workloads (1 stress thread per cpu, cpu-pinned), migration time reducted in ~66% by enabling zero-copy.

Above tests setup:
- Sending and Receiving hosts:
- CPU : Intel(R) Xeon(R) Platinum 8276L CPU @ 2.20GHz (448 CPUS)
- Network card: E810-C (100Gbps)
- >1TB RAM
- QEMU: Upstream master branch + This patchset
- Linux: Upstream v5.15
- VM configuration:
- 28 VCPUs
- 512GB RAM

---
Changes since v12:
- New patch #1 added to solve an issue with Gitlab CI on alpine
- Removed unnecessary newline in patch #3 (previously #2)
- Removed incorrect commit change in roms/skiboot on patch #4 (previously #3)

Changes since v11:
- Patch #3 now wrap lines around column 75
- Patch #2 now introduce some #ifdefs instead of defining a default value for MSG_ZEROCOPY and SO_ZEROCOPY

Changes since v10:
- Patch #2 was breaking build on systems with glibc < glibc-2.27, and probably non-linux builds.
- Also on Patch #2, replaced bits/socket.h with sys/socket.h, (thanks Peter Xu)

Changes since v9:
- Patch #6 got simplified and improved (thanks Daniel)
- Patch #7 got better comments (thanks Peter Xu)

Changes since v8:
- Inserted two new patches #5 & #6, previous patch #5 is now #7.
- Workaround an optimization introduced in d48c3a0445
- Removed unnecessary assert in qio_channel_writev_full_all

Changes since v7:
- Migration property renamed from zero-copy to zero-copy-send
- A few early tests added to help misconfigurations to fail earlier
- qio_channel_full*_flags() renamed back to qio_channel_full*()
- multifd_send_sync_main() reverted back to not receiving a flag, so it always sync zero-copy when enabled.
- Improve code quality on a few points

Changes since v6:
- Remove io_writev_zero_copy(), and makes use of io_writev() new flags to achieve the same results.
- Rename io_flush_zero_copy() to io_flush()
- Previous patch #2 became too small, so it was squashed in previous patch #3 (now patch #2)

Changes since v5:
- flush_zero_copy now returns -1 on fail, 0 on success, and 1 when all processed writes were not able to use zerocopy in kernel.
- qio_channel_socket_poll() removed, using qio_channel_wait() instead
- ENOBUFS is now processed inside qio_channel_socket_writev_flags()
- Most zerocopy parameter validation moved to migrate_params_check(), leaving only feature test to socket_outgoing_migration() callback
- Naming went from *zerocopy to *zero_copy or *zero-copy, due to QAPI/QMP preferences
- Improved docs

Changes since v4:
- 3 patches got splitted in 6
- Flush is used for syncing after each iteration, instead of only at the end
- If zerocopy is not available, fail in connect instead of failing on write
- 'multifd-zerocopy' property renamed to 'zerocopy'
- Fail migrations that don't support zerocopy, if it's enabled.
- Instead of checking for zerocopy at each write, save the flags in MultiFDSendParams->write_flags and use them on write
- Reorganized flag usage in QIOChannelSocket
- A lot of typos fixed
- More doc on buffer restrictions

Changes since v3:
- QIOChannel interface names changed from io_async_{writev,flush} to io_{writev,flush}_zerocopy
- Instead of falling back in case zerocopy is not implemented, return error and abort operation.
- Flush now waits as long as needed, or return error in case anything goes wrong, aborting the operation.
- Zerocopy is now conditional in multifd, being set by parameter multifd-zerocopy
- Moves zerocopy_flush to multifd_send_sync_main() from multifd_save_cleanup so migration can abort if flush goes wrong.
- Several other small improvements

Changes since v2:
- Patch #1: One more fallback
- Patch #2: Fall back to sync if fails to lock buffer memory in MSG_ZEROCOPY send.

Changes since v1:
- Reimplemented the patchset using async_write + async_flush approach.
- Implemented a flush to be able to tell whenever all data was written.

Leonardo Bras (8):
meson.build: Fix docker-test-build@alpine when including
linux/errqueue.h
QIOChannel: Add flags on io_writev and introduce io_flush callback
QIOChannelSocket: Implement io_writev zero copy flag & io_flush for
CONFIG_LINUX
migration: Add zero-copy-send parameter for QMP/HMP for Linux
migration: Add migrate_use_tls() helper
multifd: multifd_send_sync_main now returns negative on error
multifd: Send header packet without flags if zero-copy-send is enabled
multifd: Implement zero copy write in multifd migration
(multifd-zero-copy)

 meson.build                         |  11 +++
 qapi/migration.json                 |  24 ++++++
 include/io/channel-socket.h         |   2 +
 include/io/channel.h                |  38 ++++++++-
 migration/migration.h               |   6 ++
 migration/multifd.h                 |   4 +-
 chardev/char-io.c                   |   2 +-
 hw/remote/mpqemu-link.c             |   2 +-
 io/channel-buffer.c                 |   1 +
 io/channel-command.c                |   1 +
 io/channel-file.c                   |   1 +
 io/channel-socket.c                 | 118 +++++++++++++++++++++++++++-
 io/channel-tls.c                    |   1 +
 io/channel-websock.c                |   1 +
 io/channel.c                        |  49 +++++++++---
 migration/channel.c                 |   3 +-
 migration/migration.c               |  52 +++++++++++-
 migration/multifd.c                 |  74 ++++++++++++++---
 migration/ram.c                     |  29 +++++--
 migration/rdma.c                    |   1 +
 migration/socket.c                  |  12 ++-
 monitor/hmp-cmds.c                  |   6 ++
 scsi/pr-manager-helper.c            |   2 +-
 tests/unit/test-io-channel-socket.c |   1 +
 24 files changed, 397 insertions(+), 44 deletions(-)
Signature · 1 line
2.36.1