Skip to contentSkip to conversation

MSG_ZEROCOPY + multifd

PATCH Superseded Leonardo Bras 3 participants 10 messages May 7, 2022 – May 9, 2022

v12 of 13 Superseded Latest is v13 →

lore
Share & tools
lore
#0 lore raw

v12 cover MSG_ZEROCOPY + multifd

This patch series intends to enable MSG_ZEROCOPY in QIOChannel, and make use of it for multifd migration performance improvement, by reducing cpu usage.

Patch #1 creates new callbacks for QIOChannel, allowing the implementation of zero copy writing.

Patch #2 implements io_writev flags and io_flush() on QIOChannelSocket, making use of MSG_ZEROCOPY on Linux.

Patch #3 adds a "zero_copy_send" migration property, only available with CONFIG_LINUX, and compiled-out in any other architectures. This migration property has to be enabled before multifd migration starts.

Patch #4 adds a helper function that allows to see if TLS is going to be used. This helper will be later used in patch #5.

Patch #5 changes multifd_send_sync_main() so it returns int instead of void. The return value is used to understand if any error happened in the function, allowing migration to possible fail earlier.

Patch #6 implements an workaround: The behavior introduced in d48c3a0445 is hard to deal with in zerocopy, so a workaround is introduced to send the header in a different syscall, without MSG_ZEROCOPY.

Patch #7 Makes use of QIOChannelSocket zero_copy implementation on nocomp multifd migration.

Results:
In preliminary tests, the resource usage of __sys_sendmsg() reduced 15 times, and the overall migration took 13-22% less time, based in synthetic cpu workload.

In further tests, it was noted that, on multifd migration with 8 channels:
- On idle hosts, migration time reduced in 10% to 21%.
- On hosts busy with heavy cpu stress (1 stress thread per cpu, but not cpu-pinned) migration time reduced in ~25% by enabling zero-copy.
- On hosts with heavy cpu-pinned workloads (1 stress thread per cpu, cpu-pinned), migration time reducted in ~66% by enabling zero-copy.

Above tests setup:
- Sending and Receiving hosts:
- CPU : Intel(R) Xeon(R) Platinum 8276L CPU @ 2.20GHz (448 CPUS)
- Network card: E810-C (100Gbps)
- >1TB RAM
- QEMU: Upstream master branch + This patchset
- Linux: Upstream v5.15
- VM configuration:
- 28 VCPUs
- 512GB RAM

---
Changes since v11:
- Patch #3 now wrap lines around column 75
- Patch #2 now introduce some #ifdefs instead of defining a default value for MSG_ZEROCOPY and SO_ZEROCOPY

Changes since v10:
- Patch #2 was breaking build on systems with glibc < glibc-2.27, and probably non-linux builds.
- Also on Patch #2, replaced bits/socket.h with sys/socket.h, (thanks Peter Xu)

Changes since v9:
- Patch #6 got simplified and improved (thanks Daniel)
- Patch #7 got better comments (thanks Peter Xu)

Changes since v8:
- Inserted two new patches #5 & #6, previous patch #5 is now #7.
- Workaround an optimization introduced in d48c3a0445
- Removed unnecessary assert in qio_channel_writev_full_all

Changes since v7:
- Migration property renamed from zero-copy to zero-copy-send
- A few early tests added to help misconfigurations to fail earlier
- qio_channel_full*_flags() renamed back to qio_channel_full*()
- multifd_send_sync_main() reverted back to not receiving a flag, so it always sync zero-copy when enabled.
- Improve code quality on a few points

Changes since v6:
- Remove io_writev_zero_copy(), and makes use of io_writev() new flags to achieve the same results.
- Rename io_flush_zero_copy() to io_flush()
- Previous patch #2 became too small, so it was squashed in previous patch #3 (now patch #2)

Changes since v5:
- flush_zero_copy now returns -1 on fail, 0 on success, and 1 when all processed writes were not able to use zerocopy in kernel.
- qio_channel_socket_poll() removed, using qio_channel_wait() instead
- ENOBUFS is now processed inside qio_channel_socket_writev_flags()
- Most zerocopy parameter validation moved to migrate_params_check(), leaving only feature test to socket_outgoing_migration() callback
- Naming went from *zerocopy to *zero_copy or *zero-copy, due to QAPI/QMP preferences
- Improved docs

Changes since v4:
- 3 patches got splitted in 6
- Flush is used for syncing after each iteration, instead of only at the end
- If zerocopy is not available, fail in connect instead of failing on write
- 'multifd-zerocopy' property renamed to 'zerocopy'
- Fail migrations that don't support zerocopy, if it's enabled.
- Instead of checking for zerocopy at each write, save the flags in MultiFDSendParams->write_flags and use them on write
- Reorganized flag usage in QIOChannelSocket
- A lot of typos fixed
- More doc on buffer restrictions

Changes since v3:
- QIOChannel interface names changed from io_async_{writev,flush} to io_{writev,flush}_zerocopy
- Instead of falling back in case zerocopy is not implemented, return error and abort operation.
- Flush now waits as long as needed, or return error in case anything goes wrong, aborting the operation.
- Zerocopy is now conditional in multifd, being set by parameter multifd-zerocopy
- Moves zerocopy_flush to multifd_send_sync_main() from multifd_save_cleanup so migration can abort if flush goes wrong.
- Several other small improvements

Changes since v2:
- Patch #1: One more fallback
- Patch #2: Fall back to sync if fails to lock buffer memory in MSG_ZEROCOPY send.

Changes since v1:
- Reimplemented the patchset using async_write + async_flush approach.
- Implemented a flush to be able to tell whenever all data was written.

Leonardo Bras (7):
QIOChannel: Add flags on io_writev and introduce io_flush callback
QIOChannelSocket: Implement io_writev zero copy flag & io_flush for
CONFIG_LINUX
migration: Add zero-copy-send parameter for QMP/HMP for Linux
migration: Add migrate_use_tls() helper
multifd: multifd_send_sync_main now returns negative on error
multifd: Send header packet without flags if zero-copy-send is enabled
multifd: Implement zero copy write in multifd migration
(multifd-zero-copy)

 qapi/migration.json                 |  24 ++++++
 include/io/channel-socket.h         |   2 +
 include/io/channel.h                |  38 ++++++++-
 migration/migration.h               |   6 ++
 migration/multifd.h                 |   4 +-
 chardev/char-io.c                   |   2 +-
 hw/remote/mpqemu-link.c             |   2 +-
 io/channel-buffer.c                 |   1 +
 io/channel-command.c                |   1 +
 io/channel-file.c                   |   1 +
 io/channel-socket.c                 | 119 +++++++++++++++++++++++++++-
 io/channel-tls.c                    |   1 +
 io/channel-websock.c                |   1 +
 io/channel.c                        |  49 +++++++++---
 migration/channel.c                 |   3 +-
 migration/migration.c               |  52 +++++++++++-
 migration/multifd.c                 |  74 ++++++++++++++---
 migration/ram.c                     |  29 +++++--
 migration/rdma.c                    |   1 +
 migration/socket.c                  |  12 ++-
 monitor/hmp-cmds.c                  |   6 ++
 scsi/pr-manager-helper.c            |   2 +-
 tests/unit/test-io-channel-socket.c |   1 +
 roms/skiboot                        |   2 +-
 24 files changed, 388 insertions(+), 45 deletions(-)
Signature · 50 lines
2.36.0

From ba4f153da0dd727a301b24764f033eee5dbf5978 Mon Sep 17 00:00:00 2001
From: Leonardo Bras <[email protected]>
Date: Wed, 4 May 2022 14:44:22 -0300
Subject: [PATCH v11 0/7] MSG_ZEROCOPY + multifd
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
To: "Marc-André Lureau" <[email protected]>,Paolo Bonzini <[email protected]>,Elena Ufimtseva <[email protected]>,Jagannathan Raman <[email protected]>,John G Johnson <[email protected]>,"Daniel P. Berrangé" <[email protected]>,Juan Quintela <[email protected]>,"Dr. David Alan Gilbert" <[email protected]>,Eric Blake <[email protected]>,Markus Armbruster <[email protected]>,Fam Zheng <[email protected]>,Peter Xu <[email protected]>
Cc: [email protected], [email protected], 

Leonardo Bras (7):
  QIOChannel: Add flags on io_writev and introduce io_flush callback
  QIOChannelSocket: Implement io_writev zero copy flag & io_flush for
    CONFIG_LINUX
  migration: Add zero-copy-send parameter for QMP/HMP for Linux
  migration: Add migrate_use_tls() helper
  multifd: multifd_send_sync_main now returns negative on error
  multifd: Send header packet without flags if zero-copy-send is enabled
  multifd: Implement zero copy write in multifd migration
    (multifd-zero-copy)

 qapi/migration.json                 |  24 ++++++
 include/io/channel-socket.h         |   2 +
 include/io/channel.h                |  38 ++++++++-
 migration/migration.h               |   6 ++
 migration/multifd.h                 |   4 +-
 chardev/char-io.c                   |   2 +-
 hw/remote/mpqemu-link.c             |   2 +-
 io/channel-buffer.c                 |   1 +
 io/channel-command.c                |   1 +
 io/channel-file.c                   |   1 +
 io/channel-socket.c                 | 122 +++++++++++++++++++++++++++-
 io/channel-tls.c                    |   1 +
 io/channel-websock.c                |   1 +
 io/channel.c                        |  49 ++++++++---
 migration/channel.c                 |   3 +-
 migration/migration.c               |  52 +++++++++++-
 migration/multifd.c                 |  74 ++++++++++++++---
 migration/ram.c                     |  29 +++++--
 migration/rdma.c                    |   1 +
 migration/socket.c                  |  12 ++-
 monitor/hmp-cmds.c                  |   6 ++
 scsi/pr-manager-helper.c            |   2 +-
 tests/unit/test-io-channel-socket.c |   1 +
 23 files changed, 390 insertions(+), 44 deletions(-)

-- 
2.36.0
#1 lore raw

PATCH v12 1/7 QIOChannel: Add flags on io_writev and introduce io_flush callback

Add flags to io_writev and introduce io_flush as optional callback to QIOChannelClass, allowing the implementation of zero copy writes by subclasses.

How to use them:
- Write data using qio_channel_writev*(...,QIO_CHANNEL_WRITE_FLAG_ZERO_COPY),
- Wait write completion with qio_channel_flush().

Notes:
As some zero copy write implementations work asynchronously, it's recommended to keep the write buffer untouched until the return of qio_channel_flush(), to avoid the risk of sending an updated buffer instead of the buffer state during write.

As io_flush callback is optional, if a subclass does not implement it, then:
- io_flush will return 0 without changing anything.

Also, some functions like qio_channel_writev_full_all() were adapted to receive a flag parameter. That allows shared code between zero copy and non-zero copy writev, and also an easier implementation on new flags.

---
 include/io/channel.h                | 38 +++++++++++++++++++++-
 chardev/char-io.c                   |  2 +-
 hw/remote/mpqemu-link.c             |  2 +-
 io/channel-buffer.c                 |  1 +
 io/channel-command.c                |  1 +
 io/channel-file.c                   |  1 +
 io/channel-socket.c                 |  2 ++
 io/channel-tls.c                    |  1 +
 io/channel-websock.c                |  1 +
 io/channel.c                        | 49 +++++++++++++++++++++++------
 migration/rdma.c                    |  1 +
 scsi/pr-manager-helper.c            |  2 +-
 tests/unit/test-io-channel-socket.c |  1 +
 13 files changed, 88 insertions(+), 14 deletions(-)
include/io/channel.h +37 -1
index 88988979f8..c680ee7480 100644
@@ -32,12 +32,15 @@ OBJECT_DECLARE_TYPE(QIOChannel, QIOChannelClass,
 
 #define QIO_CHANNEL_ERR_BLOCK -2
 
+#define QIO_CHANNEL_WRITE_FLAG_ZERO_COPY 0x1
+
 typedef enum QIOChannelFeature QIOChannelFeature;
 
 enum QIOChannelFeature {
     QIO_CHANNEL_FEATURE_FD_PASS,
     QIO_CHANNEL_FEATURE_SHUTDOWN,
     QIO_CHANNEL_FEATURE_LISTEN,
+    QIO_CHANNEL_FEATURE_WRITE_ZERO_COPY,
 };
 
 
@@ -104,6 +107,7 @@ struct QIOChannelClass {
                          size_t niov,
                          int *fds,
                          size_t nfds,
+                         int flags,
                          Error **errp);
     ssize_t (*io_readv)(QIOChannel *ioc,
                         const struct iovec *iov,
@@ -136,6 +140,8 @@ struct QIOChannelClass {
                                   IOHandler *io_read,
                                   IOHandler *io_write,
                                   void *opaque);
+    int (*io_flush)(QIOChannel *ioc,
+                    Error **errp);
 };
 
 /* General I/O handling functions */
@@ -228,6 +234,7 @@ ssize_t qio_channel_readv_full(QIOChannel *ioc,
  * @niov: the length of the @iov array
  * @fds: an array of file handles to send
  * @nfds: number of file handles in @fds
+ * @flags: write flags (QIO_CHANNEL_WRITE_FLAG_*)
  * @errp: pointer to a NULL-initialized error object
  *
  * Write data to the IO channel, reading it from the
@@ -260,6 +267,7 @@ ssize_t qio_channel_writev_full(QIOChannel *ioc,
                                 size_t niov,
                                 int *fds,
                                 size_t nfds,
+                                int flags,
                                 Error **errp);
 
 /**
@@ -837,6 +845,7 @@ int qio_channel_readv_full_all(QIOChannel *ioc,
  * @niov: the length of the @iov array
  * @fds: an array of file handles to send
  * @nfds: number of file handles in @fds
+ * @flags: write flags (QIO_CHANNEL_WRITE_FLAG_*)
  * @errp: pointer to a NULL-initialized error object
  *
  *
@@ -846,6 +855,14 @@ int qio_channel_readv_full_all(QIOChannel *ioc,
  * to be written, yielding from the current coroutine
  * if required.
  *
+ * If QIO_CHANNEL_WRITE_FLAG_ZERO_COPY is passed in flags,
+ * instead of waiting for all requested data to be written,
+ * this function will wait until it's all queued for writing.
+ * In this case, if the buffer gets changed between queueing and
+ * sending, the updated buffer will be sent. If this is not a
+ * desired behavior, it's suggested to call qio_channel_flush()
+ * before reusing the buffer.
+ *
  * Returns: 0 if all bytes were written, or -1 on error
  */
 
@@ -853,6 +870,25 @@ int qio_channel_writev_full_all(QIOChannel *ioc,
                                 const struct iovec *iov,
                                 size_t niov,
                                 int *fds, size_t nfds,
-                                Error **errp);
+                                int flags, Error **errp);
+
+/**
+ * qio_channel_flush:
+ * @ioc: the channel object
+ * @errp: pointer to a NULL-initialized error object
+ *
+ * Will block until every packet queued with
+ * qio_channel_writev_full() + QIO_CHANNEL_WRITE_FLAG_ZERO_COPY
+ * is sent, or return in case of any error.
+ *
+ * If not implemented, acts as a no-op, and returns 0.
+ *
+ * Returns -1 if any error is found,
+ *          1 if every send failed to use zero copy.
+ *          0 otherwise.
+ */
+
+int qio_channel_flush(QIOChannel *ioc,
+                      Error **errp);
 
 #endif /* QIO_CHANNEL_H */
chardev/char-io.c +1 -1
index 8ced184160..4451128cba 100644
@@ -122,7 +122,7 @@ int io_channel_send_full(QIOChannel *ioc,
 
         ret = qio_channel_writev_full(
             ioc, &iov, 1,
-            fds, nfds, NULL);
+            fds, nfds, 0, NULL);
         if (ret == QIO_CHANNEL_ERR_BLOCK) {
             if (offset) {
                 return offset;
hw/remote/mpqemu-link.c +1 -1
index 2a4aa651ca..9bd98e8219 100644
@@ -68,7 +68,7 @@ bool mpqemu_msg_send(MPQemuMsg *msg, QIOChannel *ioc, Error **errp)
     }
 
     if (!qio_channel_writev_full_all(ioc, send, G_N_ELEMENTS(send),
-                                    fds, nfds, errp)) {
+                                    fds, nfds, 0, errp)) {
         ret = true;
     } else {
         trace_mpqemu_send_io_error(msg->cmd, msg->size, nfds);
io/channel-buffer.c +1 -0
index baa4e2b089..bf52011be2 100644
@@ -81,6 +81,7 @@ static ssize_t qio_channel_buffer_writev(QIOChannel *ioc,
                                          size_t niov,
                                          int *fds,
                                          size_t nfds,
+                                         int flags,
                                          Error **errp)
 {
     QIOChannelBuffer *bioc = QIO_CHANNEL_BUFFER(ioc);
io/channel-command.c +1 -0
index 4a1f969aaa..9f2f4a1793 100644
@@ -276,6 +276,7 @@ static ssize_t qio_channel_command_writev(QIOChannel *ioc,
                                           size_t niov,
                                           int *fds,
                                           size_t nfds,
+                                          int flags,
                                           Error **errp)
 {
     QIOChannelCommand *cioc = QIO_CHANNEL_COMMAND(ioc);
io/channel-file.c +1 -0
index d146ace7db..b67687c2aa 100644
@@ -114,6 +114,7 @@ static ssize_t qio_channel_file_writev(QIOChannel *ioc,
                                        size_t niov,
                                        int *fds,
                                        size_t nfds,
+                                       int flags,
                                        Error **errp)
 {
     QIOChannelFile *fioc = QIO_CHANNEL_FILE(ioc);
io/channel-socket.c +2 -0
index e531d7bd2a..05c425abb8 100644
@@ -524,6 +524,7 @@ static ssize_t qio_channel_socket_writev(QIOChannel *ioc,
                                          size_t niov,
                                          int *fds,
                                          size_t nfds,
+                                         int flags,
                                          Error **errp)
 {
     QIOChannelSocket *sioc = QIO_CHANNEL_SOCKET(ioc);
@@ -619,6 +620,7 @@ static ssize_t qio_channel_socket_writev(QIOChannel *ioc,
                                          size_t niov,
                                          int *fds,
                                          size_t nfds,
+                                         int flags,
                                          Error **errp)
 {
     QIOChannelSocket *sioc = QIO_CHANNEL_SOCKET(ioc);
io/channel-tls.c +1 -0
index 2ae1b92fc0..4ce890a538 100644
@@ -301,6 +301,7 @@ static ssize_t qio_channel_tls_writev(QIOChannel *ioc,
                                       size_t niov,
                                       int *fds,
                                       size_t nfds,
+                                      int flags,
                                       Error **errp)
 {
     QIOChannelTLS *tioc = QIO_CHANNEL_TLS(ioc);
io/channel-websock.c +1 -0
index 55145a6a8c..9619906ac3 100644
@@ -1127,6 +1127,7 @@ static ssize_t qio_channel_websock_writev(QIOChannel *ioc,
                                           size_t niov,
                                           int *fds,
                                           size_t nfds,
+                                          int flags,
                                           Error **errp)
 {
     QIOChannelWebsock *wioc = QIO_CHANNEL_WEBSOCK(ioc);
io/channel.c +39 -10

99 lines not on this page · raw message

migration/rdma.c +1 -0
index ef1e65ec36..672d1958a9 100644
@@ -2840,6 +2840,7 @@ static ssize_t qio_channel_rdma_writev(QIOChannel *ioc,
                                        size_t niov,
                                        int *fds,
                                        size_t nfds,
+                                       int flags,
                                        Error **errp)
 {
     QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc);
scsi/pr-manager-helper.c +1 -1
index 451c7631b7..3be52a98d5 100644
@@ -77,7 +77,7 @@ static int pr_manager_helper_write(PRManagerHelper *pr_mgr,
         iov.iov_base = (void *)buf;
         iov.iov_len = sz;
         n_written = qio_channel_writev_full(QIO_CHANNEL(pr_mgr->ioc), &iov, 1,
-                                            nfds ? &fd : NULL, nfds, errp);
+                                            nfds ? &fd : NULL, nfds, 0, errp);
 
         if (n_written <= 0) {
             assert(n_written != QIO_CHANNEL_ERR_BLOCK);
tests/unit/test-io-channel-socket.c +1 -0
index c49eec1f03..6713886d02 100644
@@ -444,6 +444,7 @@ static void test_io_channel_unix_fd_pass(void)
                             G_N_ELEMENTS(iosend),
                             fdsend,
                             G_N_ELEMENTS(fdsend),
+                            0,
                             &error_abort);
 
     qio_channel_readv_full(dst,
Signature · 1 line
2.36.0
#2 lore raw

PATCH v12 2/7 QIOChannelSocket: Implement io_writev zero copy flag & io_flush for CONFIG_LINUX

In reply to Leonardo Bras

For CONFIG_LINUX, implement the new zero copy flag and the optional callback io_flush on QIOChannelSocket, but enables it only when MSG_ZEROCOPY feature is available in the host kernel, which is checked on qio_channel_socket_connect_sync()

qio_channel_socket_flush() was implemented by counting how many times sendmsg(...,MSG_ZEROCOPY) was successfully called, and then reading the socket's error queue, in order to find how many of them finished sending. Flush will loop until those counters are the same, or until some error occurs.

Notes on using writev() with QIO_CHANNEL_WRITE_FLAG_ZERO_COPY:
1: Buffer
- As MSG_ZEROCOPY tells the kernel to use the same user buffer to avoid copying, some caution is necessary to avoid overwriting any buffer before it's sent. If something like this happen, a newer version of the buffer may be sent instead.
- If this is a problem, it's recommended to call qio_channel_flush() before freeing or re-using the buffer.

2: Locked memory
- When using MSG_ZERCOCOPY, the buffer memory will be locked after queued, and unlocked after it's sent.
- Depending on the size of each buffer, and how often it's sent, it may require a larger amount of locked memory than usually available to non-root user.
- If the required amount of locked memory is not available, writev_zero_copy will return an error, which can abort an operation like migration,
- Because of this, when an user code wants to add zero copy as a feature, it requires a mechanism to disable it, so it can still be accessible to less privileged users.

---
 include/io/channel-socket.h |   2 +
 io/channel-socket.c         | 117 ++++++++++++++++++++++++++++++++++--
 2 files changed, 115 insertions(+), 4 deletions(-)
include/io/channel-socket.h +2 -0
index e747e63514..513c428fe4 100644
@@ -47,6 +47,8 @@ struct QIOChannelSocket {
     socklen_t localAddrLen;
     struct sockaddr_storage remoteAddr;
     socklen_t remoteAddrLen;
+    ssize_t zero_copy_queued;
+    ssize_t zero_copy_sent;
 };
 
 
io/channel-socket.c +113 -4

167 lines not on this page · raw message

Signature · 1 line
2.36.0
#3 lore raw

Re: [PATCH v12 2/7] QIOChannelSocket: Implement io_writev zero copy flag & io_flush for CONFIG_LINUX

Quoted 10 lines · Leonardo Bras
io/channel-socket.c +2 -0
index 05c425abb8..f03a068f25 100644
@@ -25,9 +25,18 @@
 #include "io/channel-watch.h"
 #include "trace.h"
 #include "qapi/clone-visitor.h"
+#ifdef CONFIG_LINUX
+#include <linux/errqueue.h>

io/channel-socket.c line 39

Quoted 10 lines
io/channel-socket.c +7 -0
+#include <sys/socket.h>
+
+#if (defined(MSG_ZEROCOPY) && defined(SO_ZEROCOPY))
+#define QEMU_MSG_ZEROCOPY
+#endif
+#endif
 
 #define SOCKET_MAX_FDS 16
 
+

This line can be dropped when merge.

io/channel-socket.c line 42

Quoted 3 lines
io/channel-socket.c +0 -0
 SocketAddress *
 qio_channel_socket_get_local_address(QIOChannelSocket *ioc,
                                      Error **errp)

This does look nicer, imho. :)

Thanks!

Signature · 1 line
Peter Xu
#4 lore raw

Re: [PATCH v12 2/7] QIOChannelSocket: Implement io_writev zero copy flag & io_flush for CONFIG_LINUX

Quoted 18 lines · * Peter Xu ([email protected]) wrote:
Quoted 17 lines · Leonardo Bras
io/channel-socket.c +8 -0
index 05c425abb8..f03a068f25 100644
@@ -25,9 +25,18 @@
 #include "io/channel-watch.h"
 #include "trace.h"
 #include "qapi/clone-visitor.h"
+#ifdef CONFIG_LINUX
+#include <linux/errqueue.h>
+#include <sys/socket.h>
+
+#if (defined(MSG_ZEROCOPY) && defined(SO_ZEROCOPY))
+#define QEMU_MSG_ZEROCOPY
+#endif
+#endif
 
Quoted 5 lines

io/channel-socket.c line 39

Quoted 3 lines
io/channel-socket.c +1 -0
 #define SOCKET_MAX_FDS 16
 
+

This line can be dropped when merge.

Done

Quoted 12 lines

io/channel-socket.c line 42

Quoted 3 lines
io/channel-socket.c +0 -0
 SocketAddress *
 qio_channel_socket_get_local_address(QIOChannelSocket *ioc,
                                      Error **errp)

This does look nicer, imho. :)

Thanks!

Signature · 1 line
Peter Xu
Signature · 1 line
Dr. David Alan Gilbert / [email protected] / Manchester, UK
#5 lore raw

PATCH v12 3/7 migration: Add zero-copy-send parameter for QMP/HMP for Linux

In reply to Leonardo Bras

Add property that allows zero-copy migration of memory pages on the sending side, and also includes a helper function migrate_use_zero_copy_send() to check if it's enabled.

No code is introduced to actually do the migration, but it allow future implementations to enable/disable this feature.

On non-Linux builds this parameter is compiled-out.

---
 qapi/migration.json   | 24 ++++++++++++++++++++++++
 migration/migration.h |  5 +++++
 migration/migration.c | 32 ++++++++++++++++++++++++++++++++
 migration/socket.c    | 11 +++++++++--
 monitor/hmp-cmds.c    |  6 ++++++
 roms/skiboot          |  2 +-
 6 files changed, 77 insertions(+), 3 deletions(-)
qapi/migration.json +24 -0
index 409eb086a2..2222f44250 100644
@@ -741,6 +741,13 @@
 #                      will consume more CPU.
 #                      Defaults to 1. (Since 5.0)
 #
+# @zero-copy-send: Controls behavior on sending memory pages on migration.
+#                  When true, enables a zero-copy mechanism for sending
+#                  memory pages, if host supports it.
+#                  Requires that QEMU be permitted to use locked memory
+#                  for guest RAM pages.
+#                  Defaults to false. (Since 7.1)
+#
 # @block-bitmap-mapping: Maps block nodes and bitmaps on them to
 #                        aliases for the purpose of dirty bitmap migration.  Such
 #                        aliases may for example be the corresponding names on the
@@ -780,6 +787,7 @@
            'xbzrle-cache-size', 'max-postcopy-bandwidth',
            'max-cpu-throttle', 'multifd-compression',
            'multifd-zlib-level' ,'multifd-zstd-level',
+           { 'name': 'zero-copy-send', 'if' : 'CONFIG_LINUX'},
            'block-bitmap-mapping' ] }
 
 ##
@@ -906,6 +914,13 @@
 #                      will consume more CPU.
 #                      Defaults to 1. (Since 5.0)
 #
+# @zero-copy-send: Controls behavior on sending memory pages on migration.
+#                  When true, enables a zero-copy mechanism for sending
+#                  memory pages, if host supports it.
+#                  Requires that QEMU be permitted to use locked memory
+#                  for guest RAM pages.
+#                  Defaults to false. (Since 7.1)
+#
 # @block-bitmap-mapping: Maps block nodes and bitmaps on them to
 #                        aliases for the purpose of dirty bitmap migration.  Such
 #                        aliases may for example be the corresponding names on the
@@ -960,6 +975,7 @@
             '*multifd-compression': 'MultiFDCompression',
             '*multifd-zlib-level': 'uint8',
             '*multifd-zstd-level': 'uint8',
+            '*zero-copy-send': { 'type': 'bool', 'if': 'CONFIG_LINUX' },
             '*block-bitmap-mapping': [ 'BitmapMigrationNodeAlias' ] } }
 
 ##
@@ -1106,6 +1122,13 @@
 #                      will consume more CPU.
 #                      Defaults to 1. (Since 5.0)
 #
+# @zero-copy-send: Controls behavior on sending memory pages on migration.
+#                  When true, enables a zero-copy mechanism for sending
+#                  memory pages, if host supports it.
+#                  Requires that QEMU be permitted to use locked memory
+#                  for guest RAM pages.
+#                  Defaults to false. (Since 7.1)
+#
 # @block-bitmap-mapping: Maps block nodes and bitmaps on them to
 #                        aliases for the purpose of dirty bitmap migration.  Such
 #                        aliases may for example be the corresponding names on the
@@ -1158,6 +1181,7 @@
             '*multifd-compression': 'MultiFDCompression',
             '*multifd-zlib-level': 'uint8',
             '*multifd-zstd-level': 'uint8',
+            '*zero-copy-send': { 'type': 'bool', 'if': 'CONFIG_LINUX' },
             '*block-bitmap-mapping': [ 'BitmapMigrationNodeAlias' ] } }
 
 ##
migration/migration.h +5 -0
index a863032b71..e8f2941a55 100644
@@ -375,6 +375,11 @@ MultiFDCompression migrate_multifd_compression(void);
 int migrate_multifd_zlib_level(void);
 int migrate_multifd_zstd_level(void);
 
+#ifdef CONFIG_LINUX
+bool migrate_use_zero_copy_send(void);
+#else
+#define migrate_use_zero_copy_send() (false)
+#endif
 int migrate_use_xbzrle(void);
 uint64_t migrate_xbzrle_cache_size(void);
 bool migrate_colo_enabled(void);
migration/migration.c +32 -0
index 5a31b23bd6..3e91f4b5e2 100644
@@ -910,6 +910,10 @@ MigrationParameters *qmp_query_migrate_parameters(Error **errp)
     params->multifd_zlib_level = s->parameters.multifd_zlib_level;
     params->has_multifd_zstd_level = true;
     params->multifd_zstd_level = s->parameters.multifd_zstd_level;
+#ifdef CONFIG_LINUX
+    params->has_zero_copy_send = true;
+    params->zero_copy_send = s->parameters.zero_copy_send;
+#endif
     params->has_xbzrle_cache_size = true;
     params->xbzrle_cache_size = s->parameters.xbzrle_cache_size;
     params->has_max_postcopy_bandwidth = true;
@@ -1567,6 +1571,11 @@ static void migrate_params_test_apply(MigrateSetParameters *params,
     if (params->has_multifd_compression) {
         dest->multifd_compression = params->multifd_compression;
     }
+#ifdef CONFIG_LINUX
+    if (params->has_zero_copy_send) {
+        dest->zero_copy_send = params->zero_copy_send;
+    }
+#endif
     if (params->has_xbzrle_cache_size) {
         dest->xbzrle_cache_size = params->xbzrle_cache_size;
     }
@@ -1679,6 +1688,11 @@ static void migrate_params_apply(MigrateSetParameters *params, Error **errp)
     if (params->has_multifd_compression) {
         s->parameters.multifd_compression = params->multifd_compression;
     }
+#ifdef CONFIG_LINUX
+    if (params->has_zero_copy_send) {
+        s->parameters.zero_copy_send = params->zero_copy_send;
+    }
+#endif
     if (params->has_xbzrle_cache_size) {
         s->parameters.xbzrle_cache_size = params->xbzrle_cache_size;
         xbzrle_cache_resize(params->xbzrle_cache_size, errp);
@@ -2563,6 +2577,17 @@ int migrate_multifd_zstd_level(void)
     return s->parameters.multifd_zstd_level;
 }
 
+#ifdef CONFIG_LINUX
+bool migrate_use_zero_copy_send(void)
+{
+    MigrationState *s;
+
+    s = migrate_get_current();
+
+    return s->parameters.zero_copy_send;
+}
+#endif
+
 int migrate_use_xbzrle(void)
 {
     MigrationState *s;
@@ -4206,6 +4231,10 @@ static Property migration_properties[] = {
     DEFINE_PROP_UINT8("multifd-zstd-level", MigrationState,
                       parameters.multifd_zstd_level,
                       DEFAULT_MIGRATE_MULTIFD_ZSTD_LEVEL),
+#ifdef CONFIG_LINUX
+    DEFINE_PROP_BOOL("zero_copy_send", MigrationState,
+                      parameters.zero_copy_send, false),
+#endif
     DEFINE_PROP_SIZE("xbzrle-cache-size", MigrationState,
                       parameters.xbzrle_cache_size,
                       DEFAULT_MIGRATE_XBZRLE_CACHE_SIZE),
@@ -4303,6 +4332,9 @@ static void migration_instance_init(Object *obj)
     params->has_multifd_compression = true;
     params->has_multifd_zlib_level = true;
     params->has_multifd_zstd_level = true;
+#ifdef CONFIG_LINUX
+    params->has_zero_copy_send = true;
+#endif
     params->has_xbzrle_cache_size = true;
     params->has_max_postcopy_bandwidth = true;
     params->has_max_cpu_throttle = true;
migration/socket.c +9 -2
index 05705a32d8..3754d8f72c 100644
@@ -74,9 +74,16 @@ static void socket_outgoing_migration(QIOTask *task,
 
     if (qio_task_propagate_error(task, &err)) {
         trace_migration_socket_outgoing_error(error_get_pretty(err));
-    } else {
-        trace_migration_socket_outgoing_connected(data->hostname);
+           goto out;
     }
+
+    trace_migration_socket_outgoing_connected(data->hostname);
+
+    if (migrate_use_zero_copy_send()) {
+        error_setg(&err, "Zero copy send not available in migration");
+    }
+
+out:
     migration_channel_connect(data->s, sioc, data->hostname, err);
     object_unref(OBJECT(sioc));
 }
monitor/hmp-cmds.c +6 -0
index 93061a11af..622c783c32 100644
@@ -1309,6 +1309,12 @@ void hmp_migrate_set_parameter(Monitor *mon, const QDict *qdict)
         p->has_multifd_zstd_level = true;
         visit_type_uint8(v, param, &p->multifd_zstd_level, &err);
         break;
+#ifdef CONFIG_LINUX
+    case MIGRATION_PARAMETER_ZERO_COPY_SEND:
+        p->has_zero_copy_send = true;
+        visit_type_bool(v, param, &p->zero_copy_send, &err);
+        break;
+#endif
     case MIGRATION_PARAMETER_XBZRLE_CACHE_SIZE:
         p->has_xbzrle_cache_size = true;
         if (!visit_type_size(v, param, &cache_size, &err)) {
roms/skiboot +1 -1
index 24a7eb3596..820d43c0a7 160000
@@ -1 +1 @@
-Subproject commit 24a7eb35966d93455520bc2debdd7954314b638b
+Subproject commit 820d43c0a7751e75a8830561f35535dfffd522bd
Signature · 1 line
2.36.0
#6 lore raw

PATCH v12 4/7 migration: Add migrate_use_tls() helper

In reply to Leonardo Bras

A lot of places check parameters.tls_creds in order to evaluate if TLS is in use, and sometimes call migrate_get_current() just for that test.

Add new helper function migrate_use_tls() in order to simplify testing for TLS usage.

---
 migration/migration.h | 1 +
 migration/channel.c   | 3 +--
 migration/migration.c | 9 +++++++++
 migration/multifd.c   | 5 +----
 4 files changed, 12 insertions(+), 6 deletions(-)
migration/migration.h +1 -0
index e8f2941a55..485d58b95f 100644
@@ -380,6 +380,7 @@ bool migrate_use_zero_copy_send(void);
 #else
 #define migrate_use_zero_copy_send() (false)
 #endif
+int migrate_use_tls(void);
 int migrate_use_xbzrle(void);
 uint64_t migrate_xbzrle_cache_size(void);
 bool migrate_colo_enabled(void);
migration/channel.c +1 -2
index c6a8dcf1d7..a162d00fea 100644
@@ -38,8 +38,7 @@ void migration_channel_process_incoming(QIOChannel *ioc)
     trace_migration_set_incoming_channel(
         ioc, object_get_typename(OBJECT(ioc)));
 
-    if (s->parameters.tls_creds &&
-        *s->parameters.tls_creds &&
+    if (migrate_use_tls() &&
         !object_dynamic_cast(OBJECT(ioc),
                              TYPE_QIO_CHANNEL_TLS)) {
         migration_tls_channel_process_incoming(s, ioc, &local_err);
migration/migration.c +9 -0
index 3e91f4b5e2..4b6df2eb5e 100644
@@ -2588,6 +2588,15 @@ bool migrate_use_zero_copy_send(void)
 }
 #endif
 
+int migrate_use_tls(void)
+{
+    MigrationState *s;
+
+    s = migrate_get_current();
+
+    return s->parameters.tls_creds && *s->parameters.tls_creds;
+}
+
 int migrate_use_xbzrle(void)
 {
     MigrationState *s;
migration/multifd.c +1 -4
index 9ea4f581e2..2a8c8570c3 100644
@@ -782,15 +782,12 @@ static bool multifd_channel_connect(MultiFDSendParams *p,
                                     QIOChannel *ioc,
                                     Error *error)
 {
-    MigrationState *s = migrate_get_current();
-
     trace_multifd_set_outgoing_channel(
         ioc, object_get_typename(OBJECT(ioc)),
         migrate_get_current()->hostname, error);
 
     if (!error) {
-        if (s->parameters.tls_creds &&
-            *s->parameters.tls_creds &&
+        if (migrate_use_tls() &&
             !object_dynamic_cast(OBJECT(ioc),
                                  TYPE_QIO_CHANNEL_TLS)) {
             multifd_tls_channel_connect(p, ioc, &error);
Signature · 1 line
2.36.0
#7 lore raw

PATCH v12 5/7 multifd: multifd_send_sync_main now returns negative on error

In reply to Leonardo Bras

Even though multifd_send_sync_main() currently emits error_reports, it's callers don't really check it before continuing.

Change multifd_send_sync_main() to return -1 on error and 0 on success. Also change all it's callers to make use of this change and possibly fail earlier.

(This change is important to next patch on multifd zero copy implementation, to make it sure an error in zero-copy flush does not go unnoticed.

---
 migration/multifd.h |  2 +-
 migration/multifd.c | 10 ++++++----
 migration/ram.c     | 29 ++++++++++++++++++++++-------
 3 files changed, 29 insertions(+), 12 deletions(-)
migration/multifd.h +1 -1
index 7d0effcb03..bcf5992945 100644
@@ -20,7 +20,7 @@ int multifd_load_cleanup(Error **errp);
 bool multifd_recv_all_channels_created(void);
 bool multifd_recv_new_channel(QIOChannel *ioc, Error **errp);
 void multifd_recv_sync_main(void);
-void multifd_send_sync_main(QEMUFile *f);
+int multifd_send_sync_main(QEMUFile *f);
 int multifd_queue_page(QEMUFile *f, RAMBlock *block, ram_addr_t offset);
 
 /* Multifd Compression flags */
migration/multifd.c +6 -4
index 2a8c8570c3..15fb668e64 100644
@@ -566,17 +566,17 @@ void multifd_save_cleanup(void)
     multifd_send_state = NULL;
 }
 
-void multifd_send_sync_main(QEMUFile *f)
+int multifd_send_sync_main(QEMUFile *f)
 {
     int i;
 
     if (!migrate_use_multifd()) {
-        return;
+        return 0;
     }
     if (multifd_send_state->pages->num) {
         if (multifd_send_pages(f) < 0) {
             error_report("%s: multifd_send_pages fail", __func__);
-            return;
+            return -1;
         }
     }
     for (i = 0; i < migrate_multifd_channels(); i++) {
@@ -589,7 +589,7 @@ void multifd_send_sync_main(QEMUFile *f)
         if (p->quit) {
             error_report("%s: channel %d has already quit", __func__, i);
             qemu_mutex_unlock(&p->mutex);
-            return;
+            return -1;
         }
 
         p->packet_num = multifd_send_state->packet_num++;
@@ -608,6 +608,8 @@ void multifd_send_sync_main(QEMUFile *f)
         qemu_sem_wait(&p->sem_sync);
     }
     trace_multifd_send_sync_main(multifd_send_state->packet_num);
+
+    return 0;
 }
 
 static void *multifd_send_thread(void *opaque)
migration/ram.c +22 -7
index a2489a2699..5f5e37f64d 100644
@@ -2909,6 +2909,7 @@ static int ram_save_setup(QEMUFile *f, void *opaque)
 {
     RAMState **rsp = opaque;
     RAMBlock *block;
+    int ret;
 
     if (compress_threads_save_setup()) {
         return -1;
@@ -2943,7 +2944,11 @@ static int ram_save_setup(QEMUFile *f, void *opaque)
     ram_control_before_iterate(f, RAM_CONTROL_SETUP);
     ram_control_after_iterate(f, RAM_CONTROL_SETUP);
 
-    multifd_send_sync_main(f);
+    ret =  multifd_send_sync_main(f);
+    if (ret < 0) {
+        return ret;
+    }
+
     qemu_put_be64(f, RAM_SAVE_FLAG_EOS);
     qemu_fflush(f);
 
@@ -3052,7 +3057,11 @@ static int ram_save_iterate(QEMUFile *f, void *opaque)
 out:
     if (ret >= 0
         && migration_is_setup_or_active(migrate_get_current()->state)) {
-        multifd_send_sync_main(rs->f);
+        ret = multifd_send_sync_main(rs->f);
+        if (ret < 0) {
+            return ret;
+        }
+
         qemu_put_be64(f, RAM_SAVE_FLAG_EOS);
         qemu_fflush(f);
         ram_transferred_add(8);
@@ -3112,13 +3121,19 @@ static int ram_save_complete(QEMUFile *f, void *opaque)
         ram_control_after_iterate(f, RAM_CONTROL_FINISH);
     }
 
-    if (ret >= 0) {
-        multifd_send_sync_main(rs->f);
-        qemu_put_be64(f, RAM_SAVE_FLAG_EOS);
-        qemu_fflush(f);
+    if (ret < 0) {
+        return ret;
     }
 
-    return ret;
+    ret = multifd_send_sync_main(rs->f);
+    if (ret < 0) {
+        return ret;
+    }
+
+    qemu_put_be64(f, RAM_SAVE_FLAG_EOS);
+    qemu_fflush(f);
+
+    return 0;
 }
 
 static void ram_save_pending(QEMUFile *f, void *opaque, uint64_t max_size,
Signature · 1 line
2.36.0
#8 lore raw

PATCH v12 6/7 multifd: Send header packet without flags if zero-copy-send is enabled

In reply to Leonardo Bras

Since d48c3a0445 ("multifd: Use a single writev on the send side"), sending the header packet and the memory pages happens in the same writev, which can potentially make the migration faster.

Using channel-socket as example, this works well with the default copying mechanism of sendmsg(), but with zero-copy-send=true, it will cause the migration to often break.

This happens because the header packet buffer gets reused quite often, and there is a high chance that by the time the MSG_ZEROCOPY mechanism get to send the buffer, it has already changed, sending the wrong data and causing the migration to abort.

It means that, as it is, the buffer for the header packet is not suitable for sending with MSG_ZEROCOPY.

In order to enable zero copy for multifd, send the header packet on an individual write(), without any flags, and the remanining pages with a writev(), as it was happening before. This only changes how a migration with zero-copy-send=true works, not changing any current behavior for migrations with zero-copy-send=false.

---
 migration/multifd.c | 22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)
migration/multifd.c +19 -3
index 15fb668e64..2541cd2322 100644
@@ -617,6 +617,7 @@ static void *multifd_send_thread(void *opaque)
     MultiFDSendParams *p = opaque;
     Error *local_err = NULL;
     int ret = 0;
+    bool use_zero_copy_send = migrate_use_zero_copy_send();
 
     trace_multifd_send_thread_start(p->id);
     rcu_register_thread();
@@ -639,9 +640,14 @@ static void *multifd_send_thread(void *opaque)
         if (p->pending_job) {
             uint64_t packet_num = p->packet_num;
             uint32_t flags = p->flags;
-            p->iovs_num = 1;
             p->normal_num = 0;
 
+            if (use_zero_copy_send) {
+                p->iovs_num = 0;
+            } else {
+                p->iovs_num = 1;
+            }
+
             for (int i = 0; i < p->pages->num; i++) {
                 p->normal[p->normal_num] = p->pages->offset[i];
                 p->normal_num++;
@@ -665,8 +671,18 @@ static void *multifd_send_thread(void *opaque)
             trace_multifd_send(p->id, packet_num, p->normal_num, flags,
                                p->next_packet_size);
 
-            p->iov[0].iov_len = p->packet_len;
-            p->iov[0].iov_base = p->packet;
+            if (use_zero_copy_send) {
+                /* Send header first, without zerocopy */
+                ret = qio_channel_write_all(p->c, (void *)p->packet,
+                                            p->packet_len, &local_err);
+                if (ret != 0) {
+                    break;
+                }
+            } else {
+                /* Send header using the same writev call */
+                p->iov[0].iov_len = p->packet_len;
+                p->iov[0].iov_base = p->packet;
+            }
 
             ret = qio_channel_writev_all(p->c, p->iov, p->iovs_num,
                                          &local_err);
Signature · 1 line
2.36.0
#9 lore raw

PATCH v12 7/7 multifd: Implement zero copy write in multifd migration (multifd-zero-copy)

In reply to Leonardo Bras

Implement zero copy send on nocomp_send_write(), by making use of QIOChannel writev + flags & flush interface.

Change multifd_send_sync_main() so flush_zero_copy() can be called after each iteration in order to make sure all dirty pages are sent before a new iteration is started. It will also flush at the beginning and at the end of migration.

Also make it return -1 if flush_zero_copy() fails, in order to cancel the migration process, and avoid resuming the guest in the target host without receiving all current RAM.

This will work fine on RAM migration because the RAM pages are not usually freed, and there is no problem on changing the pages content between writev_zero_copy() and the actual sending of the buffer, because this change will dirty the page and cause it to be re-sent on a next iteration anyway.

A lot of locked memory may be needed in order to use multifd migration with zero-copy enabled, so disabling the feature should be necessary for low-privileged users trying to perform multifd migrations.

---
 migration/multifd.h   |  2 ++
 migration/migration.c | 11 ++++++++++-
 migration/multifd.c   | 37 +++++++++++++++++++++++++++++++++++--
 migration/socket.c    |  5 +++--
 4 files changed, 50 insertions(+), 5 deletions(-)
migration/multifd.h +2 -0
index bcf5992945..4d8d89e5e5 100644
@@ -92,6 +92,8 @@ typedef struct {
     uint32_t packet_len;
     /* pointer to the packet */
     MultiFDPacket_t *packet;
+    /* multifd flags for sending ram */
+    int write_flags;
     /* multifd flags for each packet */
     uint32_t flags;
     /* size of the next packet that contains pages */
migration/migration.c +10 -1
index 4b6df2eb5e..31739b2af9 100644
@@ -1497,7 +1497,16 @@ static bool migrate_params_check(MigrationParameters *params, Error **errp)
         error_prepend(errp, "Invalid mapping given for block-bitmap-mapping: ");
         return false;
     }
-
+#ifdef CONFIG_LINUX
+    if (params->zero_copy_send &&
+        (!migrate_use_multifd() ||
+         params->multifd_compression != MULTIFD_COMPRESSION_NONE ||
+         (params->tls_creds && *params->tls_creds))) {
+        error_setg(errp,
+                   "Zero copy only available for non-compressed non-TLS multifd migration");
+        return false;
+    }
+#endif
     return true;
 }
 
migration/multifd.c +35 -2
index 2541cd2322..9282ab6aa4 100644
@@ -569,6 +569,7 @@ void multifd_save_cleanup(void)
 int multifd_send_sync_main(QEMUFile *f)
 {
     int i;
+    bool flush_zero_copy;
 
     if (!migrate_use_multifd()) {
         return 0;
@@ -579,6 +580,20 @@ int multifd_send_sync_main(QEMUFile *f)
             return -1;
         }
     }
+
+    /*
+     * When using zero-copy, it's necessary to flush the pages before any of
+     * the pages can be sent again, so we'll make sure the new version of the
+     * pages will always arrive _later_ than the old pages.
+     *
+     * Currently we achieve this by flushing the zero-page requested writes
+     * per ram iteration, but in the future we could potentially optimize it
+     * to be less frequent, e.g. only after we finished one whole scanning of
+     * all the dirty bitmaps.
+     */
+
+    flush_zero_copy = migrate_use_zero_copy_send();
+
     for (i = 0; i < migrate_multifd_channels(); i++) {
         MultiFDSendParams *p = &multifd_send_state->params[i];
 
@@ -600,6 +615,17 @@ int multifd_send_sync_main(QEMUFile *f)
         ram_counters.transferred += p->packet_len;
         qemu_mutex_unlock(&p->mutex);
         qemu_sem_post(&p->sem);
+
+        if (flush_zero_copy && p->c) {
+            int ret;
+            Error *err = NULL;
+
+            ret = qio_channel_flush(p->c, &err);
+            if (ret < 0) {
+                error_report_err(err);
+                return -1;
+            }
+        }
     }
     for (i = 0; i < migrate_multifd_channels(); i++) {
         MultiFDSendParams *p = &multifd_send_state->params[i];
@@ -684,8 +710,8 @@ static void *multifd_send_thread(void *opaque)
                 p->iov[0].iov_base = p->packet;
             }
 
-            ret = qio_channel_writev_all(p->c, p->iov, p->iovs_num,
-                                         &local_err);
+            ret = qio_channel_writev_full_all(p->c, p->iov, p->iovs_num, NULL,
+                                              0, p->write_flags, &local_err);
             if (ret != 0) {
                 break;
             }
@@ -913,6 +939,13 @@ int multifd_save_setup(Error **errp)
         /* We need one extra place for the packet header */
         p->iov = g_new0(struct iovec, page_count + 1);
         p->normal = g_new0(ram_addr_t, page_count);
+
+        if (migrate_use_zero_copy_send()) {
+            p->write_flags = QIO_CHANNEL_WRITE_FLAG_ZERO_COPY;
+        } else {
+            p->write_flags = 0;
+        }
+
         socket_send_channel_create(multifd_new_send_channel_async, p);
     }
 
migration/socket.c +3 -2
index 3754d8f72c..4fd5e85f50 100644
@@ -79,8 +79,9 @@ static void socket_outgoing_migration(QIOTask *task,
 
     trace_migration_socket_outgoing_connected(data->hostname);
 
-    if (migrate_use_zero_copy_send()) {
-        error_setg(&err, "Zero copy send not available in migration");
+    if (migrate_use_zero_copy_send() &&
+        !qio_channel_has_feature(sioc, QIO_CHANNEL_FEATURE_WRITE_ZERO_COPY)) {
+        error_setg(&err, "Zero copy send feature not detected in host kernel");
     }
 
 out:
Signature · 1 line
2.36.0