arm: kirkwood: Add support for Pogoplug V4
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v5 Latest3 patches 8 repliesIn review
- v44 patches 3 repliesSuperseded
- v3 posting 2/24 patches 2 repliesSuperseded
Earlier versions · 3
| Version | Posted | Patches | Replies | Status |
|---|---|---|---|---|
| v3 posting 1/2 | 4 patches | 5 replies | Superseded | |
| v2 | 8 patches | 12 replies | Superseded | |
| v1 | 8 patches | 17 replies | Superseded |
Changes in v5 from the cover letter
- Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board.
- Add board_eth_init() to use uclass mvgbe to handle all Ethernet PHY configuration and bring up the network.
Patches in v5 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/3 | arm: kirkwood: Pogoplug-V4 : Add DTS filesarch/ arch/ | +181 | 1 reply | |
| 2/3 | arm: kirkwood: Pogoplug-V4 : Add Kconfig filesarch/ board/ | +22 | 2 replies | |
| 3/3 | arm: kirkwood: Pogoplug-V4 : Add board implementation filesboard/ board/ board/ +3 more | +447 | 4 replies |
Reviews trailers per patch
All 3 patches have a Reviewed-by or Acked-by.
| Patch | Stefan Roese | Pali Rohár |
|---|---|---|
| 1/3 | R-b | R-b |
| 2/3 | R-b | R-b |
| 3/3 | R-b | R-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v5 0/3] arm: kirkwood: Add support for Pogoplug V4
Pogoplug V4 specifications:
Kirkwood 88F6192 SoC
800 MHz CPU
1Gbs Ethernet
128 MB RAM
128 MB NAND
1x USB 2.0
2x USB 3.0 (on PCIe bus)
1 SDHC slot
1x External SATA port (USM enclosure form factor slot)
Changes in v5:
- Currently, CONFIG_RESET_PHY_R symbol is used in arch/arm/mach-kirkwood/include/mach/config.h for all Kirkwood boards with mv8831116 PHY, with each board defines the function reset_phy(). Undefine it for this board.
- Add board_eth_init() to use uclass mvgbe to handle all Ethernet PHY configuration and bring up the network.
Changes in v4:
- Remove CONFIG_FEATURE_COMMAND_EDITING and ifdefs for CMD_NET in include header
Changes in v3:
- Migrate symbols from board include header to Kconfig
- Squash board file small patches into one patch
- Migrate config symbols from board include header to defconfig
- Remove obsolete config symbols from header file
- Don't use ifdefs for unselectable config symbols in header file
Changes in v2:
- Use mainline Linux DTS version
- Move constants to .c file and remove header file
- Use canonical format for defconfig file
Tony Dinh (3):
arm: kirkwood: Pogoplug-V4 : Add DTS files
arm: kirkwood: Pogoplug-V4 : Add Kconfig files
arm: kirkwood: Pogoplug-V4 : Add board implementation files
arch/arm/dts/Makefile | 1 + arch/arm/dts/kirkwood-pogoplug-series-4.dts | 180 ++++++++++++++++++++ arch/arm/mach-kirkwood/Kconfig | 6 + board/cloudengines/pogo_v4/Kconfig | 16 ++ board/cloudengines/pogo_v4/MAINTAINERS | 6 + board/cloudengines/pogo_v4/Makefile | 10 ++ board/cloudengines/pogo_v4/kwbimage.cfg | 148 ++++++++++++++++ board/cloudengines/pogo_v4/pogo_v4.c | 148 ++++++++++++++++ configs/pogo_v4_defconfig | 79 +++++++++ include/configs/pogo_v4.h | 56 ++++++ 10 files changed, 650 insertions(+) create mode 100644 arch/arm/dts/kirkwood-pogoplug-series-4.dts create mode 100644 board/cloudengines/pogo_v4/Kconfig create mode 100644 board/cloudengines/pogo_v4/MAINTAINERS create mode 100644 board/cloudengines/pogo_v4/Makefile create mode 100644 board/cloudengines/pogo_v4/kwbimage.cfg create mode 100644 board/cloudengines/pogo_v4/pogo_v4.c create mode 100644 configs/pogo_v4_defconfig create mode 100644 include/configs/pogo_v4.h
Signature · 1 line
2.30.2