Skip to content

Add PCIe support for Iomega iConnect board

Tony Dinh u-boot 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 5 repliesIn review

Patches in v1 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/3arm: kirkwood: iConnect : Add PCIe related configsconfigs/iconnect_defconfig+5 -01 reply
2/3arm: kirkwood: iConnect : Add PCIe late initboard/iomega/iconnect/iconnect.c+7 -01 reply
3/3arm: kirkwood: iConnect : Update board maintainerboard/iomega/iconnect/MAINTAINERS+1 -01 reply

Reviews trailers per patch

All 3 patches have a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchStefan RoesePali Rohár
SeriesR-b
1/3R-b
2/3R-b
3/3R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH 0/3] Add PCIe support for Iomega iConnect board

The Iomega iConnect board has an internal mPCIe slot.
- Add PCIe support to enable the mPCIe slot to accept devices such as Wifi card or mSATA.
- Add SYS_THUMB_BUILD to keep u-boot image size within 512K
- Add myself as maintainer. Luka no longer has this board and wishes
to see someone maintaining it actively

Tony Dinh (3):
arm: kirkwood: iConnect : Add PCIe related configs
arm: kirkwood: iConnect : Add PCIe late init
arm: kirkwood: iConnect : Update board maintainer

 board/iomega/iconnect/MAINTAINERS | 1 +
 board/iomega/iconnect/iconnect.c  | 7 +++++++
 configs/iconnect_defconfig        | 5 +++++
 3 files changed, 13 insertions(+)
Signature · 1 line
2.30.2