Skip to content

Cadence MACB/GEM support for ZynqMP SGMII

Robert Hancock linux-devicetree netdev 4 versions – Applied

Status from this message: This series was applied to netdev/net-next.git (master)

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest3 patches 1 replyApplied 3/3
  2. v33 patches 1 replySuperseded
  3. v23 patches 3 repliesSuperseded
Earlier versions · 1
VersionPostedPatchesRepliesStatus
v13 patches9 repliesSuperseded

Changes in v4 from the cover letter

-more code formatting and error handling fixes

Patches in v4 All 3 applied

#Subject and filesSizeRepliesApplied
1/3dt-bindings: net: cdns,macb: added generic PHY and reset mappings for ZynqMPDocumentation/devicetree/bindings/net/cdns,macb.yaml+56 -00 repliesApplied
2/3net: macb: Added ZynqMP-specific initializationdrivers/net/ethernet/cadence/macb.h drivers/net/ethernet/cadence/macb_main.c+64 -31 replyApplied
3/3arm64: dts: zynqmp: Added GEM reset definitionsarch/arm64/boot/dts/xilinx/zynqmp.dtsi+8 -00 repliesApplied

Reviews trailers per patch

1 of 3 patches has a Reviewed-by or Acked-by.

PatchClaudiu Beznea
1/3
2/3R-b
3/3

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v4 thread

Cover letter [PATCH net-next v4 0/3] Cadence MACB/GEM support for ZynqMP SGMII

Changes to allow SGMII mode to work properly in the GEM driver on the Xilinx ZynqMP platform.

Changes since v3:
-more code formatting and error handling fixes

Changes since v2:
-fixed missing includes in DT binding example
-fixed phy_init and phy_power_on error handling/cleanup, moved phy_power_on to open rather than probe

Changes since v1:
-changed order of controller reset and PHY init as per suggestion -switched device reset to be optional
-updated bindings doc patch for switch to YAML

Robert Hancock (3):
dt-bindings: net: cdns,macb: added generic PHY and reset mappings for
ZynqMP
net: macb: Added ZynqMP-specific initialization
arm64: dts: zynqmp: Added GEM reset definitions

 .../devicetree/bindings/net/cdns,macb.yaml    | 56 +++++++++++++++++
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi        |  8 +++
 drivers/net/ethernet/cadence/macb.h           |  4 ++
 drivers/net/ethernet/cadence/macb_main.c      | 63 ++++++++++++++++++-
 4 files changed, 128 insertions(+), 3 deletions(-)
Signature · 1 line
2.31.1