Skip to content

net: mscc-miim: add integrated PHY reset support

Michael Walle linux-devicetree lkml netdev 3 versions – Applied

Status from this message: This series was applied to netdev/net-next.git (master)

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest3 patches 2 repliesApplied 3/3
  2. v23 patches 7 repliesSuperseded
  3. v13 patches 4 repliesSuperseded

Changes in v3 from the cover letter

- fix typo in commit message
- use microchip,lan966x instead of mscc,lan966x
- rename mask variable to {phy_,}reset_bits
- check return code from device_get_match_data() right after the call instead of checking it where it is used

Patches in v3 All 3 applied

#Subject and filesSizeRepliesApplied
1/3dt-bindings: net: mscc-miim: add lan966x compatibleDocumentation/devicetree/bindings/net/mscc-miim.txt+1 -10 repliesApplied
2/3net: mdio: mscc-miim: replace magic numbers for the bus resetdrivers/net/mdio/mdio-mscc-miim.c+5 -51 replyApplied
3/3net: mdio: mscc-miim: add lan966x internal phy reset supportdrivers/net/mdio/mdio-mscc-miim.c+49 -181 replyApplied

Reviews trailers per patch

All 3 patches have a Reviewed-by or Acked-by.

PatchHoratiu VulturAndrew Lunn
1/3A-b
2/3R-b
3/3R-b

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v3 thread

Cover letter [PATCH net-next v3 0/3] net: mscc-miim: add integrated PHY reset support

The MDIO driver has support to release the integrated PHYs from reset. This was implemented for the SparX-5 for now. Now add support for the LAN966x, too.

changes since v2:
- fix typo in commit message
- use microchip,lan966x instead of mscc,lan966x
- rename mask variable to {phy_,}reset_bits
- check return code from device_get_match_data() right after the call instead of checking it where it is used

changes since v1:
- fix typo in the subject in patch 3/3

Michael Walle (3):
dt-bindings: net: mscc-miim: add lan966x compatible
net: mdio: mscc-miim: replace magic numbers for the bus reset
net: mdio: mscc-miim: add lan966x internal phy reset support

 .../devicetree/bindings/net/mscc-miim.txt     |  2 +-
 drivers/net/mdio/mdio-mscc-miim.c             | 67 ++++++++++++++-----
 2 files changed, 50 insertions(+), 19 deletions(-)
Signature · 1 line
2.30.2