Skip to content

RFC Enable clk-critical to bd718x7

Michael Trimarchi linux-clk lkml 1 version New

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 RFC Latest0 of 3 patches 0 repliesNew

Patches in v1 No applies recorded yet

None of the 3 patches the cover letter announces are in this archive.

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.

Read the v1 thread

Cover letter [RFC PATCH 0/3] Enable clk-critical to bd718x7

The imx8mn cpu smms2 module is clocked by the pmic that provides clk32K. If the pmic clk driver is loaded the device can not boot. This series try to make this configuration possible. We mark the pmic clock as critical.

Open question:
clock-critical is not documentated as dts properties and could be clock-critical can be changed as no-int one.
This is a follow up of [1]

[1] https://lore.kernel.org/linux-devicetree/[email protected]/T/#u

Michael Trimarchi (3):
clk: bd718x7: Clean up the code, no functional changes
clk: bd718x7: Enable the possibility to mark the clock as critical
arm64: dts: imx8mn-bsh-smm-s2/pro: Add pmic clock connection

 .../freescale/imx8mn-bsh-smm-s2-common.dtsi   |  5 ++++
 drivers/clk/clk-bd718x7.c                     | 23 +++++++++++--------
 2 files changed, 19 insertions(+), 9 deletions(-)
Signature · 1 line
2.25.1