Skip to contentSkip to conversation

Enable clk-critical to bd718x7

RFC PATCH New Michael Trimarchi 1 participant 1 message Jun 5, 2022 Common clk

lore
Share & tools
lore
#0 lore raw

cover Enable clk-critical to bd718x7

The imx8mn cpu smms2 module is clocked by the pmic that provides clk32K. If the pmic clk driver is loaded the device can not boot. This series try to make this configuration possible. We mark the pmic clock as critical.

Open question:
clock-critical is not documentated as dts properties and could be clock-critical can be changed as no-int one.
This is a follow up of [1]

[1] https://lore.kernel.org/linux-devicetree/[email protected]/T/#u

Michael Trimarchi (3):
clk: bd718x7: Clean up the code, no functional changes
clk: bd718x7: Enable the possibility to mark the clock as critical
arm64: dts: imx8mn-bsh-smm-s2/pro: Add pmic clock connection

 .../freescale/imx8mn-bsh-smm-s2-common.dtsi   |  5 ++++
 drivers/clk/clk-bd718x7.c                     | 23 +++++++++++--------
 2 files changed, 19 insertions(+), 9 deletions(-)
Signature · 1 line
2.25.1