pinctrl: nuvoton: add pinmux and GPIO driver for NPCM8XX
Get series with b4
b4 am [email protected]Versions newest first
- v1 Latest2 patches 0 repliesNew
Patches in v1 No applies recorded yet
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/2 | dt-binding: pinctrl: Add NPCM8XX pinctrl and GPIO documentationDocumentation/ | +213 | 0 replies | |
| 2/2 | pinctrl: nuvoton: add NPCM8XX pinctrl and GPIO driverdrivers/ drivers/ drivers/ +1 more | +2571 | 0 replies |
Reviews trailers per patch
No Reviewed-by, Acked-by or Tested-by trailers for v1 yet.
Cover letter [PATCH linux dev-5.15 v1 0/2] pinctrl: nuvoton: add pinmux and GPIO driver for NPCM8XX
This patch set adds pinmux and GPIO controller for the Arbel NPCM8XX Baseboard Management Controller (BMC).
Arbel BMC NPCM8XX pinctrl driver based on Poleg NPCM7XX, except the pin mux mapping difference the NPCM8XX GPIO supports adjust debounce period time.
Arbel BMC NPCM8XX Pinmux functions accessible only for pin groups and pin configuration parameters available only for individual pins.
Arbel BMC NPCM8XX has eight identical GPIO modules, each module has 32 GPIO ports.
Most of the GPIO ports are multiplexed with other system functions.
The NPCM8XX pinctrl and GPIO driver was tested on the Arbel NPCM8XX evaluation board that running Arbel OpenBMC.
This patchset is based on the Arbel NPCM8XX pinctrl and GPIO 5.19 kernel patchset.
https://lwn.net/Articles/901214/
Tomer Maimon (2):
dt-binding: pinctrl: Add NPCM8XX pinctrl and GPIO documentation
pinctrl: nuvoton: add NPCM8XX pinctrl and GPIO driver
.../pinctrl/nuvoton,npcm845-pinctrl.yaml | 213 ++ drivers/pinctrl/Makefile | 2 +- drivers/pinctrl/nuvoton/Kconfig | 13 + drivers/pinctrl/nuvoton/Makefile | 1 + drivers/pinctrl/nuvoton/pinctrl-npcm8xx.c | 2556 +++++++++++++++++ 5 files changed, 2784 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml create mode 100644 drivers/pinctrl/nuvoton/pinctrl-npcm8xx.c
Signature · 1 line
2.33.0