Improve K3-am625-sk support (USB, MMC)
Status from this message: I have applied the following to branch ti-k3-next on [1].
Get series with b4
b4 am [email protected]Versions newest first · linked by author and title
- v4 Latest3 patches 1 replyApplied
- v33 patches 2 repliesSuperseded
- v23 patches 0 repliesSuperseded
Earlier versions · 1
| Version | Posted | Patches | Replies | Status |
|---|---|---|---|---|
| v1 | 3 patches | 7 replies | Superseded |
Changes in v4 from the cover letter
- Disable new usbss nodes by default in the dtsi and enable in the dts
- Drop unneeded disabled nodes in board dts
Patches in v4 Applied
| # | Subject and files | Size | Replies | Applied |
|---|---|---|---|---|
| 1/3 | arm64: dts: ti: k3-am62-main: Update OTAP and ITAP delay selectarch/ | +24 | 0 replies | |
| 2/3 | arm64: dts: ti: k3-am62-main: Add support for USBarch/ | +46 | 0 replies | |
| 3/3 | arm64: dts: ti: k3-am625-sk: Add support for USBarch/ | +27 | 0 replies |
Reviews trailers per patch
None of the 3 patches has a Reviewed-by or Acked-by.
| Patch | Martyn Welch |
|---|---|
| 1/3 | T-b |
| 2/3 | T-b |
| 3/3 | T-b |
Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.
Cover letter [PATCH v4 0/3] Improve K3-am625-sk support (USB, MMC)
This series picks up a few patches from the TI BSP tree that unfortunately didn't make it upstream thusfar.
The first patch improve SD card compatibility (allowing U1 class cards to be used), the remaining ones add USB support.
The type-c connector isn't entirely modelled with these changes as it goes through a TPS6598 PD controller. Unfortunately the dtb bindings for that currently require an irq line, which is not connected on E1 and E2 version boards. The patchese to support this setup unfortunately didn't land yet[0].. As such the last patch ignored the PD controller and simply configures usb0 as periphal only rather then mode switch capable, which at least gives some basic usability of that USB port.
0: https://lore.kernel.org/lkml/[email protected]/T/
Changes in v4:
- Disable new usbss nodes by default in the dtsi and enable in the dts
- Drop unneeded disabled nodes in board dts
Changes in v3:
- Rebased against current ti-next aka 6.2-rc1
- Add Martyn's tested-by
Changes in v2:
- Rebase against linux-next 20221220
Aswath Govindraju (2):
arm64: dts: ti: k3-am62-main: Add support for USB
arm64: dts: ti: k3-am625-sk: Add support for USB
Nitin Yadav (1):
arm64: dts: ti: k3-am62-main: Update OTAP and ITAP delay select
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 92 ++++++++++++++++++------ arch/arm64/boot/dts/ti/k3-am625-sk.dts | 27 +++++++ 2 files changed, 97 insertions(+), 22 deletions(-)
Signature · 7 lines
2.39.0 _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel