Skip to content

drm/msm/mdss: enable access to hw_rev from MDSS driver

Dmitry Baryshkov linux-arm-msm linux-devicetree 1 version In review

Get series with b4
b4 am [email protected]

Versions newest first

  1. v2 Latest4 patches 6 repliesIn review

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4dt-bindings: display/msm: add core clock to the mdss bindingsDocumentation/devicetree/bindings/display/msm/qcom,mdss.yaml+26 -86 replies
2/4drm/msm/mdss: enable optional core clock for MDP5 MDSSdrivers/gpu/drm/msm/msm_mdss.c+2 -10 replies
3/4drm/msm/mdss: check for core clk before accessing HW_REVdrivers/gpu/drm/msm/msm_mdss.c+17 -50 replies
4/4drm/msm/mdss: move is_mdp5 condition to msm_mdss_initdrivers/gpu/drm/msm/msm_mdss.c+3 -30 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [PATCH v2 0/4] drm/msm/mdss: enable access to hw_rev from MDSS driver

On newer platforms mdss can read hw_rev register. On older platforms the mdss driver can not read hw_rev register (to determine the platform). Add optional 'core' clock that enables access to MDSS registers before MDP5/DPU device is bound (and enabled the core clock).

Dmitry Baryshkov (4):
dt-bindings: display/msm: add core clock to the mdss bindings drm/msm/mdss: enable optional core clock for MDP5 MDSS drm/msm/mdss: check for core clk before accessing HW_REV drm/msm/mdss: move is_mdp5 condition to msm_mdss_init

 .../bindings/display/msm/qcom,mdss.yaml       | 34 ++++++++++++++-----
 drivers/gpu/drm/msm/msm_mdss.c                | 31 ++++++++++++-----
 2 files changed, 48 insertions(+), 17 deletions(-)
Signature · 1 line
2.39.0