Skip to content

SM8350 Display DTS

[email protected] linux-arm-msm linux-devicetree lkml 1 version Applied

Status from this message: Applied, thanks!

Get series with b4
b4 am [email protected]

Versions newest first

  1. v1 Latest3 patches 2 repliesApplied

Patches in v1 Applied

#Subject and filesSizeRepliesApplied
1/3arm64: dts: qcom: sm8350: Add display system nodesarch/arm64/boot/dts/qcom/sm8350.dtsi+293 -40 replies
2/3arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodesarch/arm64/boot/dts/qcom/sm8350-hdk.dts+22 -01 reply
3/3arm64: dts: qcom: sm8350-hdk: Enable lt9611uxc dsi-hdmi bridgearch/arm64/boot/dts/qcom/sm8350-hdk.dts+105 -00 replies

Reviews trailers per patch

1 of 3 patches has a Reviewed-by or Acked-by.

PatchNeil Armstrong
1/3
2/3R-b
3/3

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v1 thread

Cover letter [PATCH v1 0/3] SM8350 Display DTS

From: Robert Foss <[email protected]>

This series was split out of v4 of the SM8350 DSI series[1], and now only contains the DTS changes related Display on SM8350.

[1] https://lore.kernel.org/all/[email protected]/

Robert Foss (3):
arm64: dts: qcom: sm8350: Add display system nodes
arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodes
arm64: dts: qcom: sm8350-hdk: Enable lt9611uxc dsi-hdmi bridge

 arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 127 ++++++++++
 arch/arm64/boot/dts/qcom/sm8350.dtsi    | 297 +++++++++++++++++++++++-
 2 files changed, 420 insertions(+), 4 deletions(-)
Signature · 1 line
2.34.1